Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Engines
Published Date: 2/6/2026
Proposed Rule
Summary
If you own or work with Rolls-Royce Deutschland Trent 1000 engines, the FAA wants you to do new on-wing and in-shop checks for cracks or leaks in certain engine tubes. They’re updating inspection rules to keep engines safe, letting some inspections happen less often but adding new ones on the wing. Comments on these changes are open until March 23, 2026, so get ready to inspect and keep those engines flying strong!
Analyzed Economic Effects
4 provisions identified: 1 benefits, 3 costs, 0 mixed.
On‑condition replacement cost estimates
If inspections find cracking, damage, or air leakage wear, required replacements have substantial on‑condition costs: replacing IP8 air transfer tubes is estimated at $7,770 per engine, replacing HP3 air transfer tubes is estimated at $12,070 per engine, and replacing front bearing housing IP8 air feed tubes is estimated at $10,170 per engine. The FAA states it cannot predict how many engines will need replacements.
New on-wing tube inspections required
If you own or work with Rolls‑Royce Deutschland Trent 1000 engines (all listed Trent 1000‑AE3 through Trent 1000‑R3 models), the FAA proposes required initial and repetitive on‑wing visual inspections of the IP8 and HP3 air transfer tubes for cracking, damage, or air leakage wear. The FAA estimates each on‑wing inspection takes 4 work‑hours (4 x $85 = $340) per engine. Comments on the proposal are due March 23, 2026.
In‑shop inspection interval may increase
The proposed AD continues to require initial and repetitive in‑shop visual inspections of the IP8 and HP3 air transfer tubes and the front bearing housing IP8 air feed tubes, but it states the inspection interval for repetitive in‑shop inspections of the front bearing housing IP8 air feed tubes may be increased. The FAA estimates each in‑shop inspection takes 4 work‑hours (4 x $85 = $340) per engine.
FAA estimates U.S. impact and inspection total
The FAA estimates this proposed AD would affect four engines on U.S.‑registered aircraft. At the per‑engine inspection cost of $340, the agency lists the total cost on U.S. operators for each inspection action as $1,360 (4 engines x $340).
Personalized for You
How does this regulation affect your finances?
Personalize government policy and PRIA will tell you what this federal register document means for your household, plus every other regulation we track. PRIA reads each provision against your financial profile to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-15585, Requirements for Interference-Tolerant Radio Altimeter Systems
In July 2025, President Trump signed the One Big Beautiful Bill Act. Section 40002 of that law re-institutes the Federal Communications Commission's general auction authority and specifically directs the Commission to complete a system of competitive bidding for not less than 100 megahertz in the 3.98-4.2 gigahertz band (Upper C- band). This final rule supports the Federal Communications Commission's July 2026 Report and Order that makes 160 megahertz of the Upper C-band available for terrestrial wireless flexible use via a system of competitive bidding. To ensure safe, efficient, and reliable aviation operations in the presence of wireless signals in the C-band, the Federal Aviation Administration is issuing new regulations that require all radio altimeters to meet specific minimum performance requirements. These new radio altimeters must withstand interference from wireless signals in neighboring spectrum bands and continue to provide accurate altitude readings to both pilots and integrated aircraft safety systems. These regulations require all aircraft equipped with radio altimeters operating under part 121 and those aircraft with radio altimeters operating under part 129 with 30 or more passenger seats or a payload capacity of more than 7,500 pounds to comply with the minimum performance requirements by December 30, 2030, which is prior to the date the Federal Communications Commission authorizes the use of the Upper C-band for new wireless services, as stated in its Report and Order. All other aircraft equipped with radio altimeters that are required to comply with part 91, including aircraft operating under parts 125, 133, 135, 136, 137, 194, and all other aircraft operating under part 129 that are not subject to the initial deadline, must comply with the same minimum performance requirements on or before October 31, 2034.
2026-13440, Enabling Supersonic Overland Flight
The FAA wants to let supersonic planes fly over land again by updating old rules that banned them because of loud sonic booms. Thanks to new tech that keeps booms quiet, this change will open the door for faster, cooler flights across the U.S., helping America lead the world in supersonic travel. People and companies interested in supersonic flight should share their thoughts by August 17, 2026.
2026-13126, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility; Extension of Comment Period
The FAA is giving more time—until August 5, 2026—for people to share their thoughts on new rules that would limit drone flights near important fixed sites like power plants or airports. This affects drone operators and facility owners who want to keep the skies safe and secure. No new costs yet, just extra time to weigh in and help shape the rules.
2026-08943, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility
The FAA is proposing new rules to keep drones away from certain important fixed sites like power plants or airports to keep everyone safe and secure. If you own or operate one of these sites, you can request a drone flight restriction zone to protect your property and people nearby. Comments are open until July 6, 2026, and these changes could affect drone pilots and site operators, but no big costs are expected.
2026-18601, Airworthiness Directives; Dassault Aviation Airplanes
The FAA is superseding Airworthiness Directive (AD) 2023-23- 06, which applied to certain Dassault Aviation Model FALCON 2000EX airplanes. AD 2023-23-06 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. Since the FAA issued AD 2023-23- 06, the FAA has determined that new or more restrictive airworthiness limitations are necessary. This AD continues to require certain actions in AD 2023-23-06 and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is issuing this AD to address the unsafe condition on these products.
2026-18602, Airworthiness Directives; Dassault Aviation Airplanes
The FAA is superseding Airworthiness Directive (AD) 2023-22- 12, which applied to all Dassault Aviation Model FALCON 2000 airplanes. AD 2023-22-12 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. Since the FAA issued AD 2023-22-12, the FAA has determined that new or more restrictive airworthiness limitations are necessary. This AD continues to require certain actions in AD 2023- 22-12 and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is issuing this AD to address the unsafe condition on these products.
Previous / Next Documents
Previous: 2026-02346, US Ecology Nevada, Inc. High Mercury Subcategory Wastes Land Disposal Restrictions Variance
The EPA is proposing to let US Ecology Nevada treat and safely bury elemental mercury waste from high mercury materials under special rules. This change affects how mercury waste is handled at facilities in Nevada and Pennsylvania, aiming to protect people and the environment while allowing some flexibility. Comments on this plan are open until March 9, 2026, so stakeholders can weigh in before it’s finalized.
Next: 2026-02370, Magnuson-Stevens Act Provisions; Fisheries Off West Coast States; Pacific Coast Groundfish Fishery; Pacific Coast Groundfish Fishery Management Plan; Fixed Gear Marking and Entanglement Risk Reduction
Fishermen using fixed gear off the West Coast will soon need to mark their gear clearly and follow new steps to reduce the chance of marine animals getting tangled. These changes aim to protect ocean life while helping identify which gear causes problems. Comments on the plan are open until March 9, 2026, so fishers and the public can weigh in before it’s final.