FAA Establishes New RNAV Route Q-151, Axes Old Jet Route J-517
Published Date: 2/24/2026
Rule
Summary
Starting May 19, 2026, the FAA is creating a new high-tech flight path called RNAV Route Q-151 and retiring the old Jet Route J-517 in the northern U.S. This change helps pilots fly safer and smoother because the old route lost its signal coverage. Airlines and pilots flying in this area will need to use the new route, but no extra costs or delays are expected.
Analyzed Economic Effects
1 provisions identified: 1 benefits, 0 costs, 0 mixed.
RNAV Q-151 Replaces Jet Route J-517
Starting at 0901 UTC on May 19, 2026, the FAA revokes Jet Route J-517 and establishes RNAV Route Q-151 between WINEN, UT (WP) and EDGES, ID (Fix). Pilots and airlines operating in the northern U.S. must use the new RNAV route because J-517 lost navigational signal coverage, and the FAA states no extra costs or delays are expected.
Personalized for You
How does this regulation affect your finances?
Personalize government policy and PRIA will tell you what this federal register document means for your household, plus every other regulation we track. PRIA reads each provision against your financial profile to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-13440, Enabling Supersonic Overland Flight
The FAA wants to let supersonic planes fly over land again by updating old rules that banned them because of loud sonic booms. Thanks to new tech that keeps booms quiet, this change will open the door for faster, cooler flights across the U.S., helping America lead the world in supersonic travel. People and companies interested in supersonic flight should share their thoughts by August 17, 2026.
2026-13126, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility; Extension of Comment Period
The FAA is giving more time—until August 5, 2026—for people to share their thoughts on new rules that would limit drone flights near important fixed sites like power plants or airports. This affects drone operators and facility owners who want to keep the skies safe and secure. No new costs yet, just extra time to weigh in and help shape the rules.
2026-08943, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility
The FAA is proposing new rules to keep drones away from certain important fixed sites like power plants or airports to keep everyone safe and secure. If you own or operate one of these sites, you can request a drone flight restriction zone to protect your property and people nearby. Comments are open until July 6, 2026, and these changes could affect drone pilots and site operators, but no big costs are expected.
2026-14881, Airworthiness Directives; Bell Textron Canada Limited Helicopters
This update affects owners and operators of Bell Textron Canada helicopters. It requires important safety checks and fixes to keep these helicopters flying safely. The changes must be done within set deadlines and might cost some money, but they help prevent serious problems in the air.
2026-14882, Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Engines
If you own certain Rolls-Royce Trent 1000 engines, the FAA wants you to keep checking a part called the high-pressure turbine triple seal for wear and replace it if needed. They’re updating the rules to remove some engines from this check because a new fix now makes inspections unnecessary for those. Comments on this change are open until September 8, 2026, so get ready to act and keep your engines safe without breaking the bank!
2026-14886, Airworthiness Directives; Airbus Helicopters
If you own or operate an Airbus EC130B4 helicopter, heads up! The FAA wants to fix weak door locks by requiring changes to the swinging and sliding door supports. You’ll need to update your helicopter soon to keep flying safely, and no new affected doors can be installed unless they meet the new rules. Comments on this plan are open until September 8, 2026, so don’t miss your chance to weigh in!
Previous / Next Documents
Previous: 2026-03645, Economic Adjustment Assistance for Textile Mills-Payment Rate
The USDA is boosting the payment rate for the Economic Adjustment Assistance for Textile Mills program from 3 to 5 cents per pound of upland cotton, starting August 1, 2025. This means eligible U.S. textile mills get more financial help to upgrade their equipment and facilities. The new rule kicks in officially on February 24, 2026, giving mills a bigger boost to grow and modernize their operations.
Next: 2026-03651, Amendment of Very High Frequency Omnidirectional Range Federal Airways V-14, V-192, V-210, and V-221 in the Vicinity of Muncie, Indiana
The FAA is updating four VOR airways near Muncie, Indiana, because they're shutting down the Muncie VOR navigation beacon. This change affects pilots flying these routes and will take effect on May 14, 2026. No extra costs for the public, just smoother, safer skies as the FAA modernizes navigation.