FAA Tells Airbus H160-B Operators to Inspect a Rotor Part
Published Date: 3/6/2026
Rule
Summary
If you own or operate an Airbus H160-B helicopter, listen up! The FAA found a problem where a key rotor part might break during flight, so they’re requiring inspections and fixes to keep everyone safe. These checks start March 23, 2026, and you’ll need to report what you find—so don’t wait or you might face costly repairs later.
Analyzed Economic Effects
4 provisions identified: 0 benefits, 4 costs, 0 mixed.
Potentially large replacement costs
If inspection findings require replacement of the upper and lower pitch rod end bearings, the FAA estimates on-condition replacement costs up to $135,250 per helicopter (8 work-hours at $85/hour = $680 plus parts cost up to $134,570). The FAA cannot predict how many of the 13 U.S.-registered H160-B helicopters will need replacements.
Special flight permits are prohibited
Special flight permits are prohibited under this AD, effective March 23, 2026, meaning operators cannot obtain permits to fly the helicopter to a maintenance location under this AD's authority.
Immediate inspection within 5 hours TIS
If you own or operate an Airbus Helicopters Model H160-B, you must do a one-time inspection of the upper and lower main rotor pitch rod end bearings within 5 hours time-in-service, following EASA AD 2026-0020 procedures as incorporated by reference. You must report the inspection results and follow any required corrective actions; the FAA requires you to submit the inspection report within 10 days.
Mandatory reporting and paperwork burden
You must report the inspection results within 10 days; the FAA estimates reporting/public disclosure takes about 1 hour per response and uses OMB Control Number 2120-0056. The FAA lists reporting labor as 1 work-hour at $85 per helicopter.
Personalized for You
How does this regulation affect your finances?
Personalize government policy and PRIA will tell you what this federal register document means for your household, plus every other regulation we track. PRIA reads each provision against your financial profile to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-15585, Requirements for Interference-Tolerant Radio Altimeter Systems
In July 2025, President Trump signed the One Big Beautiful Bill Act. Section 40002 of that law re-institutes the Federal Communications Commission's general auction authority and specifically directs the Commission to complete a system of competitive bidding for not less than 100 megahertz in the 3.98-4.2 gigahertz band (Upper C- band). This final rule supports the Federal Communications Commission's July 2026 Report and Order that makes 160 megahertz of the Upper C-band available for terrestrial wireless flexible use via a system of competitive bidding. To ensure safe, efficient, and reliable aviation operations in the presence of wireless signals in the C-band, the Federal Aviation Administration is issuing new regulations that require all radio altimeters to meet specific minimum performance requirements. These new radio altimeters must withstand interference from wireless signals in neighboring spectrum bands and continue to provide accurate altitude readings to both pilots and integrated aircraft safety systems. These regulations require all aircraft equipped with radio altimeters operating under part 121 and those aircraft with radio altimeters operating under part 129 with 30 or more passenger seats or a payload capacity of more than 7,500 pounds to comply with the minimum performance requirements by December 30, 2030, which is prior to the date the Federal Communications Commission authorizes the use of the Upper C-band for new wireless services, as stated in its Report and Order. All other aircraft equipped with radio altimeters that are required to comply with part 91, including aircraft operating under parts 125, 133, 135, 136, 137, 194, and all other aircraft operating under part 129 that are not subject to the initial deadline, must comply with the same minimum performance requirements on or before October 31, 2034.
2026-13440, Enabling Supersonic Overland Flight
The FAA wants to let supersonic planes fly over land again by updating old rules that banned them because of loud sonic booms. Thanks to new tech that keeps booms quiet, this change will open the door for faster, cooler flights across the U.S., helping America lead the world in supersonic travel. People and companies interested in supersonic flight should share their thoughts by August 17, 2026.
2026-13126, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility; Extension of Comment Period
The FAA is giving more time—until August 5, 2026—for people to share their thoughts on new rules that would limit drone flights near important fixed sites like power plants or airports. This affects drone operators and facility owners who want to keep the skies safe and secure. No new costs yet, just extra time to weigh in and help shape the rules.
2026-08943, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility
The FAA is proposing new rules to keep drones away from certain important fixed sites like power plants or airports to keep everyone safe and secure. If you own or operate one of these sites, you can request a drone flight restriction zone to protect your property and people nearby. Comments are open until July 6, 2026, and these changes could affect drone pilots and site operators, but no big costs are expected.
2025-04846, Extension of the Prohibition Against Certain Flights in the Territory and Airspace of Libya
The FAA is extending the ban on certain flights over Libya for three more years, until March 20, 2028. This affects U.S. airlines, commercial operators, and pilots with FAA certificates flying in Libyan airspace, due to ongoing safety risks. The rule also reminds everyone how to apply for special approvals or exemptions if needed.
2025-03853, Enforcement Policy Regarding “Drug and Alcohol Testing of Certificated Repair Station Employees Located Outside of the United States; Correction”
The FAA is giving repair stations outside the U.S. a break by delaying enforcement of new drug and alcohol testing rules until March 20, 2025. This means affected repair stations don’t have to worry about penalties if they aren’t fully following the updated rules just yet. The delay helps everyone get ready without rushing or extra costs.
Previous / Next Documents
Previous: 2026-04448, Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Engines
The FAA is requiring all Rolls-Royce Trent 7000-72 and 7000-72C engines to get new, more frequent visual checks on certain air tubes to catch cracks or leaks early. These inspections start April 10, 2026, and if any damage is found, parts must be replaced to keep flights safe. This update helps prevent engine problems and keeps everyone flying smoothly, though it means some extra maintenance work and costs for operators.
Next: 2026-04452, Rescinding Regulations Related to Nondiscrimination in Federally Assisted Programs or Activities (General Provisions)
The Department of Energy is delaying the start date for canceling rules about nondiscrimination in programs it helps fund. This delay gives more time to review feedback and follow guidance from the Justice Department. People and groups involved in federally supported energy programs should watch for updates, as the new effective date is now July 6, 2026, with no immediate cost changes.