Airbus Helicopters Get Vibration Check Mandate – Safety First
Published Date: 3/13/2026
Rule
Summary
If you fly certain Airbus Helicopters like the AS332 series, new safety rules kick in April 17, 2026. The FAA is updating past rules to now require regular checks of helicopter vibrations during flight and fixing any problems found. These changes keep pilots and passengers safer without big costs but do need some extra attention and maintenance.
Analyzed Economic Effects
5 provisions identified: 3 benefits, 2 costs, 0 mixed.
Mandatory removal for some AS332s
If your Airbus Helicopter AS332C, AS332C1, AS332L, or AS332L1 is equipped with a dual hoist installation and a de-icing system and does NOT have Airbus modification 0722907 installed, you must within 7 days after May 20, 2020 remove the removable parts of the dual hoist or remove the de-icing system in accordance with the specified Emergency Alert Service Bulletin procedures.
Required in-flight vibration checks
For helicopters with Airbus modification 0722907 installed, within 110 hours time-in-service or 30 days (whichever is first) after the effective date of this AD (April 17, 2026) and thereafter during the first flight after each specified maintenance task, you must perform an in-flight vibration level measurement at 12 Hz per ASB AS332-04-00-0001. If the vibration between 11.7 Hz and 12.7 Hz exceeds 0.08g (0.40 IPS), you must, before further flight, revise the configuration by removing the dual hoist or the blade de-icing harnesses per the ASB.
Estimated compliance costs and fleet size
The FAA estimates this AD affects five helicopters on the U.S. registry. Estimated costs: removing the dual hoist or removing the de-icing system is 12 work-hours × $85 = $1,020 per helicopter; measuring vibrations is 7 work-hours × $85 = $595 per measurement cycle; revising the RFM or installing a placard is 1 work-hour = $85 each. The FAA states it cannot predict how many helicopters will need on-condition repairs based on inspection results.
Optional placard/RFM alternative
For helicopters without Airbus modification 0722907, you may comply with the removal requirement by revising the rotorcraft flight manual with the information in Appendix 4A/4B/4C of EASB AS332 01.00.96 and installing a locally made placard on the instrument panel, per section 3.B.1 of that EASB. The FAA estimates revising the RFM or installing a placard costs about 1 work-hour each (about $85 each).
Pilot-performed checks and record rules
The owner/operator pilot holding at least a private pilot certificate may perform the in-flight vibration measurement and must enter compliance into the helicopter maintenance records in accordance with 14 CFR 43.9(a) and 91.417(a)(2)(v). The AD specifies that the pilot-performed check is allowed because it involves only recording in-flight data and inserting pages into the RFM.
Personalized for You
How does this regulation affect your finances?
Personalize government policy and PRIA will tell you what this federal register document means for your household, plus every other regulation we track. PRIA reads each provision against your financial profile to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-13440, Enabling Supersonic Overland Flight
The FAA wants to let supersonic planes fly over land again by updating old rules that banned them because of loud sonic booms. Thanks to new tech that keeps booms quiet, this change will open the door for faster, cooler flights across the U.S., helping America lead the world in supersonic travel. People and companies interested in supersonic flight should share their thoughts by August 17, 2026.
2026-13126, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility; Extension of Comment Period
The FAA is giving more time—until August 5, 2026—for people to share their thoughts on new rules that would limit drone flights near important fixed sites like power plants or airports. This affects drone operators and facility owners who want to keep the skies safe and secure. No new costs yet, just extra time to weigh in and help shape the rules.
2026-08943, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility
The FAA is proposing new rules to keep drones away from certain important fixed sites like power plants or airports to keep everyone safe and secure. If you own or operate one of these sites, you can request a drone flight restriction zone to protect your property and people nearby. Comments are open until July 6, 2026, and these changes could affect drone pilots and site operators, but no big costs are expected.
2026-16750, Establishment of Class E Airspace; DeKalb, IL
This action proposes to establish Class E airspace at Northwestern Memorial Healthcare Heliport, DeKalb, IL. The FAA is proposing this action to support new instrument procedures and instrument flight rule (IFR) operations.
2026-16754, Agency Information Collection Activities: Requests for Comments; Clearance for Renewal of Information Collection: Privacy International Civil Aviation Organization (ICAO) Address
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval for an information collection renewal. The collection involves an aircraft operator's request for a privacy ICAO address through a web-based application process. The information to be collected is necessary to qualify for the authorized use of the privacy ICAO address services and for monitoring to support continued airworthiness and enforcement activities.
2026-16705, Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Engines
The FAA proposes to adopt a new airworthiness directive (AD) for all Rolls-Royce Deutschland Ltd & Co KG (RRD) Model Trent XWB-75, XWB-79, XWB-79B, and XWB-84 engines. This proposed AD was prompted by reports of differential oil pressure measurements that were lower than expected on in-service engines. This proposed AD would require modification of the engine with an improved front bearing housing oil feed tube assembly. This proposed AD would also prohibit the installation of an affected front bearing housing oil feed tube assembly on any engine. The FAA is proposing this AD to address the unsafe condition on these products.
Previous / Next Documents
Previous: 2026-04931, Schedule of Fees for Consular Services-Fee for Administrative Processing of Request for Certificate of Loss of Nationality of the United States
Good news for U.S. citizens and nationals who want to give up their citizenship! Starting April 13, 2026, the fee for processing a Certificate of Loss of Nationality drops from $2,350 to just $450. This big price cut makes it way easier and cheaper to handle this important paperwork at U.S. embassies and consulates.
Next: 2026-04978, William D. Ford Federal Direct Loan (Direct Loan) Program; Correction
The Department of Education fixed some confusing instructions in a previous rule about Public Service Loan Forgiveness for Direct Loan borrowers. These corrections don’t change the actual rules but make sure everything is clear and in the right place. The fix kicks in on July 1, 2026, so borrowers and loan servicers can stay on track without any money surprises.