Pipeline folks nod to latest steel pipe spec
Published Date: 7/31/2026
Rule
Summary
PHMSA is confirming the effective date for a DFR published in the Federal Register on April 24, 2026. The DFR amended PHMSA's regulations at 49 CFR parts 192 and 195 to incorporate by reference the updated industry standard ASTM A53/A53M, Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless (ASTM A53/A53M).
No Economic Impacts Identified for this Document
Personalized for You
How does this regulation affect your finances?
Personalize government policy and PRIA will tell you what this federal register document means for your household, plus every other regulation we track. PRIA reads each provision against your financial profile to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-13805, Pipeline Safety: Repair Criteria for Hazardous Liquid and Gas Transmission Pipelines
The government wants to update pipeline safety rules to make fixing gas and liquid pipelines smarter, safer, and cheaper. These changes affect pipeline operators who’ll use new tech and clearer guidelines to spot and repair problems faster. Comments are open until September 8, 2026, so get ready to weigh in before the rules get final—and yes, this could save money and prevent accidents!
2026-10782, Pipeline Safety: Class Location Change Requirements; Correction
PHMSA fixed a small but important detail in a new pipeline safety rule from January 2026. Pipeline operators can now confirm or restore safe pressure levels when neighborhoods change around their pipes, with a clear 24-month deadline starting either from the rule’s effective date or when they begin work. This helps keep gas pipelines safe without confusion about timing, so operators know exactly when to act and avoid costly delays.
2026-08144, Administrative Rulemaking, Guidance, and Enforcement Procedures
The Department of Transportation is bringing back and improving its rules for making new policies, giving guidance, and enforcing laws. This affects anyone involved in transportation regulations, making the process clearer and more consistent. These changes kick in on May 27, 2026, aiming to save time and avoid confusion without adding extra costs.
2026-08058, Pipeline Safety: Safety of Gas Transmission Pipelines: MAOP Reconfirmation, Expansion of Assessment Requirements, and Other Related Amendments; Correction
This update fixes a numbering mistake in the rules for checking the maximum safe pressure of gas pipelines. Pipeline operators must follow the corrected list to avoid confusion, but no new costs or deadlines are added. The fix takes effect on August 3, 2026, making safety rules clearer and easier to follow.
2026-06323, Pipeline Safety: Class Location Change Requirements; Response to Petition for Reconsideration
Pipeline companies and safety pros, listen up! PHMSA just said no to changes requested by the Interstate Natural Gas Association about pipeline safety rules for areas where people live or work. This means the current rules about how pipelines must be upgraded when neighborhoods grow stay in place, so companies should keep their safety upgrades on schedule without extra costs or delays.
2026-15571, Pipeline Safety: Standards Update-NFPA 58
PHMSA is confirming the effective date for a DFR published in the Federal Register on April 24, 2026. The DFR amended PHMSA's regulations at 49 CFR part 192 to incorporate by reference the updated industry standard NFPA 58, Liquefied Petroleum Gas Code (NFPA 58).
Previous / Next Documents
Previous: 2026-15583, Pipeline Safety: Standards Update-ASTM A333/A333M
PHMSA is confirming the effective date for a DFR published in the Federal Register on April 24, 2026. The DFR amended PHMSA's regulations at 49 CFR parts 192 and 195 to incorporate by reference the updated industry standard ASTM A333/A333M, Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness (ASTM A333/A333M).
Next: 2026-15585, Requirements for Interference-Tolerant Radio Altimeter Systems
In July 2025, President Trump signed the One Big Beautiful Bill Act. Section 40002 of that law re-institutes the Federal Communications Commission's general auction authority and specifically directs the Commission to complete a system of competitive bidding for not less than 100 megahertz in the 3.98-4.2 gigahertz band (Upper C- band). This final rule supports the Federal Communications Commission's July 2026 Report and Order that makes 160 megahertz of the Upper C-band available for terrestrial wireless flexible use via a system of competitive bidding. To ensure safe, efficient, and reliable aviation operations in the presence of wireless signals in the C-band, the Federal Aviation Administration is issuing new regulations that require all radio altimeters to meet specific minimum performance requirements. These new radio altimeters must withstand interference from wireless signals in neighboring spectrum bands and continue to provide accurate altitude readings to both pilots and integrated aircraft safety systems. These regulations require all aircraft equipped with radio altimeters operating under part 121 and those aircraft with radio altimeters operating under part 129 with 30 or more passenger seats or a payload capacity of more than 7,500 pounds to comply with the minimum performance requirements by December 30, 2030, which is prior to the date the Federal Communications Commission authorizes the use of the Upper C-band for new wireless services, as stated in its Report and Order. All other aircraft equipped with radio altimeters that are required to comply with part 91, including aircraft operating under parts 125, 133, 135, 136, 137, 194, and all other aircraft operating under part 129 that are not subject to the initial deadline, must comply with the same minimum performance requirements on or before October 31, 2034.