Airbus Chopper Pilots: Test Valves for Sneaky Magnet Issues

2026-13440, Enabling Supersonic Overland Flight

The FAA wants to let supersonic planes fly over land again by updating old rules that banned them because of loud sonic booms. Thanks to new tech that keeps booms quiet, this change will open the door for faster, cooler flights across the U.S., helping America lead the world in supersonic travel. People and companies interested in supersonic flight should share their thoughts by August 17, 2026.

2026-13126, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility; Extension of Comment Period

The FAA is giving more time—until August 5, 2026—for people to share their thoughts on new rules that would limit drone flights near important fixed sites like power plants or airports. This affects drone operators and facility owners who want to keep the skies safe and secure. No new costs yet, just extra time to weigh in and help shape the rules.

2026-08943, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility

The FAA is proposing new rules to keep drones away from certain important fixed sites like power plants or airports to keep everyone safe and secure. If you own or operate one of these sites, you can request a drone flight restriction zone to protect your property and people nearby. Comments are open until July 6, 2026, and these changes could affect drone pilots and site operators, but no big costs are expected.

2026-16506, Airworthiness Directives; Airbus Helicopters

The FAA is adopting a new airworthiness directive (AD) for all Airbus Helicopters Model EC 155 B and EC 155 B1 helicopters. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the airworthiness limitations section (ALS) of the existing maintenance manual (MM) or instructions for continued airworthiness (ICA) and the existing approved maintenance or inspection program, as applicable. The FAA is issuing this AD to address the unsafe condition on these products.

2026-16567, Airworthiness Directives; Airbus SAS Airplanes

The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus SAS Model A330-243, A330-243F, A330-341, A330-342, A330- 343, A330-841, and A330-941 airplanes; and Model A340-211, A340-212, A340-213, A340-311, A340-312, A340-313, A340-541, and A340-642 airplanes. This proposed AD was prompted by reports of leaks on closed fuel low pressure shut-off valves (LPSOVs). This proposed AD would require repetitive leak checks of certain fuel LPSOVs and replacement of an affected part if any discrepancy is detected. This proposed AD would also allow the installation of an affected part under certain conditions. The FAA is proposing this AD to address the unsafe condition on these products.

2026-16502, Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Engines

The FAA proposes to supersede Airworthiness Directive (AD) 2025-26-03, which applies to certain Rolls-Royce Deutschland Ltd & Co KG (RRD) Model Trent 1000-A, Trent 1000-AE, Trent 1000-C, Trent 1000- CE, Trent 1000-D, Trent 1000-E, Trent 1000-G, and Trent 1000-H engines. AD 2025-26-03 requires repetitive borescope inspections (BSIs) of the high-pressure compressor (HPC) rear drum cavity and cavities between each HPC rotor disc, and depending on the results of inspection, removal of the engine from service. AD 2025-26-03 also allows an alternative method of complying with the repetitive BSIs if certain actions are accomplished. Since the FAA issued AD 2025-26-03, RRD published updated service material with a revised bolting arrangement at the HPC rotor shaft to high-pressure turbine (HPT) rotor disc interface to address the unsafe condition. This proposed AD would require repetitive BSIs of the HPC rear drum cavity and cavities between each HPC rotor disc, and depending on the results of inspection, removal of the engine from service. This proposed AD would also allow an alternative method of complying with BSIs if certain actions are accomplished, and require modification of the bolting arrangement as a terminating action for the repetitive BSIs. The FAA is proposing this AD to address the unsafe condition on these products.

Previous: 2026-16506, Airworthiness Directives; Airbus Helicopters

The FAA is adopting a new airworthiness directive (AD) for all Airbus Helicopters Model EC 155 B and EC 155 B1 helicopters. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the airworthiness limitations section (ALS) of the existing maintenance manual (MM) or instructions for continued airworthiness (ICA) and the existing approved maintenance or inspection program, as applicable. The FAA is issuing this AD to address the unsafe condition on these products.

Next: 2026-16508, Medicaid Program; Prohibition on Federal Medicaid and Children's Health Insurance Program Funding for Sex-Rejecting Procedures Furnished to Children

This final rule requires that a State Medicaid plan must provide that the Medicaid agency will not make payment under the plan for sex-rejecting procedures for children under 18, and prohibits the use of Federal Medicaid dollars to fund sex-rejecting procedures for individuals under the age of 18. In addition, this final rule requires that a separate State Children's Health Insurance Program (CHIP) plan must provide that the CHIP agency will not make payment under the plan for sex-rejecting procedures for children under 19, and prohibits the use of Federal CHIP dollars to fund sex-rejecting procedures for individuals under the age of 19. For Medicaid and CHIP beneficiaries who are actively receiving cross-sex hormone therapy, State Medicaid and CHIP agencies may continue to claim Federal Financial Participation for those hormone therapy medications for a period of up to 6 months from the effective date of this final rule.