FAA Wants Airbus Helicopter Owners to Tighten a Rotor Nut
Published Date: 10/19/2026
Proposed Rule
Summary
The FAA wants all owners of certain Airbus Helicopters to check the tightness of a key nut on the main rotor servo-control to prevent safety issues. If the nut isn’t tight enough, they’ll need to fix it and report the results. Comments on this plan are open until December 3, 2026, so act fast to keep your helicopter flying safe and sound!
Analyzed Economic Effects
5 provisions identified: 1 benefits, 4 costs, 0 mixed.
Possible costly repairs if defects found
If the inspection finds problems, corrective actions can include cleaning threads, inspecting threads, replacing one ball bearing end (up to $615 including labor), or replacing one MR servo-control (up to $54,640 including labor and parts). The FAA states it cannot predict how many helicopters will require these replacements.
Mandatory nut-torque inspection for MR servo-controls
If you own or operate an Airbus Helicopters Model AS350B3, AS355F, AS355F1, AS355F2, AS355N, AS355NP, EC130B4, or EC130T2, you must inspect the tightening torque of the nut at the upper ball bearing end of each main-rotor (MR) servo-control. The rule requires a one-time inspection and also requires inspecting the nut torque after every removal and installation of an MR servo-control, in accordance with EASA AD 2026-0132 (dated July 8, 2026).
FAA estimates fleet and aggregate compliance costs
The FAA estimates this proposed AD would apply to 980 U.S.-registered helicopters. The FAA estimates total inspection costs on U.S. operators of $269,500 for the torque inspections and $83,300 for the reporting burden, using its unit cost assumptions.
Mandatory reporting of inspection results
You must report the inspection results to the authority as required by the AD; reporting is a mandatory information collection under OMB Control Number 2120-0056. The FAA estimates public reporting will take about 1 hour per response.
Credit if you already followed April 1, 2026 service bulletins
If you performed the required inspection actions before the AD's effective date using Airbus Service Bulletin AS350-67-30-0002 (dated 2026-04-01), AS355-67-30-0001 (dated 2026-04-01), or EC130-67-30-0001 (dated 2026-04-01), you get credit and do not need to repeat those actions to comply with this AD.
Personalized for You
How does this regulation affect your finances?
Personalize government policy and PRIA will tell you what this federal register document means for your household, plus every other regulation we track. PRIA reads each provision against your financial profile to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-15585, Requirements for Interference-Tolerant Radio Altimeter Systems
In July 2025, President Trump signed the One Big Beautiful Bill Act. Section 40002 of that law re-institutes the Federal Communications Commission's general auction authority and specifically directs the Commission to complete a system of competitive bidding for not less than 100 megahertz in the 3.98-4.2 gigahertz band (Upper C- band). This final rule supports the Federal Communications Commission's July 2026 Report and Order that makes 160 megahertz of the Upper C-band available for terrestrial wireless flexible use via a system of competitive bidding. To ensure safe, efficient, and reliable aviation operations in the presence of wireless signals in the C-band, the Federal Aviation Administration is issuing new regulations that require all radio altimeters to meet specific minimum performance requirements. These new radio altimeters must withstand interference from wireless signals in neighboring spectrum bands and continue to provide accurate altitude readings to both pilots and integrated aircraft safety systems. These regulations require all aircraft equipped with radio altimeters operating under part 121 and those aircraft with radio altimeters operating under part 129 with 30 or more passenger seats or a payload capacity of more than 7,500 pounds to comply with the minimum performance requirements by December 30, 2030, which is prior to the date the Federal Communications Commission authorizes the use of the Upper C-band for new wireless services, as stated in its Report and Order. All other aircraft equipped with radio altimeters that are required to comply with part 91, including aircraft operating under parts 125, 133, 135, 136, 137, 194, and all other aircraft operating under part 129 that are not subject to the initial deadline, must comply with the same minimum performance requirements on or before October 31, 2034.
2026-13440, Enabling Supersonic Overland Flight
The FAA wants to let supersonic planes fly over land again by updating old rules that banned them because of loud sonic booms. Thanks to new tech that keeps booms quiet, this change will open the door for faster, cooler flights across the U.S., helping America lead the world in supersonic travel. People and companies interested in supersonic flight should share their thoughts by August 17, 2026.
2026-13126, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility; Extension of Comment Period
The FAA is giving more time—until August 5, 2026—for people to share their thoughts on new rules that would limit drone flights near important fixed sites like power plants or airports. This affects drone operators and facility owners who want to keep the skies safe and secure. No new costs yet, just extra time to weigh in and help shape the rules.
2026-08943, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility
The FAA is proposing new rules to keep drones away from certain important fixed sites like power plants or airports to keep everyone safe and secure. If you own or operate one of these sites, you can request a drone flight restriction zone to protect your property and people nearby. Comments are open until July 6, 2026, and these changes could affect drone pilots and site operators, but no big costs are expected.
2025-04846, Extension of the Prohibition Against Certain Flights in the Territory and Airspace of Libya
The FAA is extending the ban on certain flights over Libya for three more years, until March 20, 2028. This affects U.S. airlines, commercial operators, and pilots with FAA certificates flying in Libyan airspace, due to ongoing safety risks. The rule also reminds everyone how to apply for special approvals or exemptions if needed.
2025-03853, Enforcement Policy Regarding “Drug and Alcohol Testing of Certificated Repair Station Employees Located Outside of the United States; Correction”
The FAA is giving repair stations outside the U.S. a break by delaying enforcement of new drug and alcohol testing rules until March 20, 2025. This means affected repair stations don’t have to worry about penalties if they aren’t fully following the updated rules just yet. The delay helps everyone get ready without rushing or extra costs.
Previous / Next Documents
Previous: 2026-21383, New Source Performance Standards and National Emission Standards for Hazardous Air Pollutants; Delegation of Authority to Northwest Clean Air Agency, Washington State
The EPA is proposing to give the Northwest Clean Air Agency in Washington State updated authority to enforce new air pollution rules for factories and businesses. This change means NWCAA can better manage pollution limits based on the latest standards through October 18, 2023. People and companies in the area should note comments are open until November 18, 2026, but this doesn’t affect tribal lands or add new costs.
Next: 2026-21420, Medicare Program; Implementation of Sections 6219, 6220, and 6224 of the Consolidated Appropriations Act, 2026
This new Medicare rule will help people with low incomes pay less for their prescriptions, make sure health provider lists are accurate, and hold pharmacy benefit managers more accountable. If you use Medicare Part D or work with pharmacies and providers, these changes could affect you starting soon. Comments on the rule are open until December 15, 2026, so now’s the time to speak up!