FAA Proposes More Checks for Certain Embraer Airplanes
Published Date: 11/3/2026
Proposed Rule
Summary
The FAA wants to update safety rules for certain Embraer ERJ 190 airplanes by adding stricter maintenance checks to keep them flying safely. This affects owners and operators who must revise their inspection programs soon. Comments on these changes are open until December 18, 2026, and while it means more work, it helps prevent unsafe conditions without major cost spikes.
Analyzed Economic Effects
4 provisions identified: 1 benefits, 3 costs, 0 mixed.
Operators must revise maintenance programs
If you own or operate certain Embraer ERJ 190 airplanes (models ERJ 190-100 STD, -100 LR, -100 IGW, -100 ECJ, and ERJ 190-200 STD, -200 LR, -200 IGW), you must revise your maintenance or inspection program to incorporate new or more restrictive airworthiness limitations specified in ANAC AD 2026-04-01 and ANAC AD 2023-12-02. Compliance is required under 14 CFR 91.403(c) and the revisions include new actions (for example, inspections) and Critical Design Configuration Control Limitations (CDCCLs).
FAA cost estimate: 90 work-hours × $85
The FAA estimates this proposed AD affects 46 U.S.-registered airplanes and estimates a per-operator labor cost of $7,650 for the retained actions from AD 2024-17-03 (90 work-hours × $85 per hour). The FAA also estimates an average per-operator labor cost of $7,650 for the new proposed actions (90 work-hours × $85 per hour).
Revising program can terminate AD 2025-14-05
If you accomplish the maintenance/inspection program revision required by this proposed AD (paragraph (i)), it will terminate all requirements of AD 2025-14-05 for the following airplanes: Model ERJ 190-100 STD, -100 LR, -100 IGW, -100 ECJ, and Model ERJ 190-200 STD, -200 LR, and -200 IGW.
Operators with prior repairs must request AMOC
If your airplane has been previously modified, altered, or repaired in areas addressed by this proposed AD and you cannot accomplish the required revisions, you must request approval for an alternative method of compliance (AMOC) from the FAA Manager, AIR-520, Continued Operational Safety Branch, following 14 CFR 39.19. Contact and submission procedures are specified in the proposed AD.
Personalized for You
How does this regulation affect your finances?
Personalize government policy and PRIA will tell you what this federal register document means for your household, plus every other regulation we track. PRIA reads each provision against your financial profile to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-15585, Requirements for Interference-Tolerant Radio Altimeter Systems
In July 2025, President Trump signed the One Big Beautiful Bill Act. Section 40002 of that law re-institutes the Federal Communications Commission's general auction authority and specifically directs the Commission to complete a system of competitive bidding for not less than 100 megahertz in the 3.98-4.2 gigahertz band (Upper C- band). This final rule supports the Federal Communications Commission's July 2026 Report and Order that makes 160 megahertz of the Upper C-band available for terrestrial wireless flexible use via a system of competitive bidding. To ensure safe, efficient, and reliable aviation operations in the presence of wireless signals in the C-band, the Federal Aviation Administration is issuing new regulations that require all radio altimeters to meet specific minimum performance requirements. These new radio altimeters must withstand interference from wireless signals in neighboring spectrum bands and continue to provide accurate altitude readings to both pilots and integrated aircraft safety systems. These regulations require all aircraft equipped with radio altimeters operating under part 121 and those aircraft with radio altimeters operating under part 129 with 30 or more passenger seats or a payload capacity of more than 7,500 pounds to comply with the minimum performance requirements by December 30, 2030, which is prior to the date the Federal Communications Commission authorizes the use of the Upper C-band for new wireless services, as stated in its Report and Order. All other aircraft equipped with radio altimeters that are required to comply with part 91, including aircraft operating under parts 125, 133, 135, 136, 137, 194, and all other aircraft operating under part 129 that are not subject to the initial deadline, must comply with the same minimum performance requirements on or before October 31, 2034.
2026-13440, Enabling Supersonic Overland Flight
The FAA wants to let supersonic planes fly over land again by updating old rules that banned them because of loud sonic booms. Thanks to new tech that keeps booms quiet, this change will open the door for faster, cooler flights across the U.S., helping America lead the world in supersonic travel. People and companies interested in supersonic flight should share their thoughts by August 17, 2026.
2026-13126, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility; Extension of Comment Period
The FAA is giving more time—until August 5, 2026—for people to share their thoughts on new rules that would limit drone flights near important fixed sites like power plants or airports. This affects drone operators and facility owners who want to keep the skies safe and secure. No new costs yet, just extra time to weigh in and help shape the rules.
2026-08943, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility
The FAA is proposing new rules to keep drones away from certain important fixed sites like power plants or airports to keep everyone safe and secure. If you own or operate one of these sites, you can request a drone flight restriction zone to protect your property and people nearby. Comments are open until July 6, 2026, and these changes could affect drone pilots and site operators, but no big costs are expected.
2025-04846, Extension of the Prohibition Against Certain Flights in the Territory and Airspace of Libya
The FAA is extending the ban on certain flights over Libya for three more years, until March 20, 2028. This affects U.S. airlines, commercial operators, and pilots with FAA certificates flying in Libyan airspace, due to ongoing safety risks. The rule also reminds everyone how to apply for special approvals or exemptions if needed.
2025-03853, Enforcement Policy Regarding “Drug and Alcohol Testing of Certificated Repair Station Employees Located Outside of the United States; Correction”
The FAA is giving repair stations outside the U.S. a break by delaying enforcement of new drug and alcohol testing rules until March 20, 2025. This means affected repair stations don’t have to worry about penalties if they aren’t fully following the updated rules just yet. The delay helps everyone get ready without rushing or extra costs.
Previous / Next Documents
Previous: 2026-22373, Airworthiness Directives; MD Helicopters, LLC Helicopters
The FAA wants to update safety rules for MD Helicopters with cargo hooks, adding more helicopter models to the list. They’re asking owners to replace or fix certain clutch parts and update maintenance manuals to keep flying safe. Comments are open until December 18, 2026, so owners should act soon to avoid costly fixes later.
Next: 2026-22383, Airworthiness Directives; The Boeing Company Airplanes
The FAA is updating safety rules for certain Boeing 757 airplanes to fix errors in previous instructions about wiring and relay fixes. This means some planes will need new parts installed, wiring changed, and tests done to keep flying safely. Owners must comment by December 18, 2026, and be ready for possible costs and work to avoid risks with the power transfer unit.