Boeing 757s Face Inspections After Cracks Appear in Repaired Fuselage
Published Date: 11/20/2026
Rule
Summary
If you own or operate a Boeing 757, listen up! The FAA found cracks in some repaired parts of the plane’s fuselage and now requires inspections and fixes to keep everyone safe. These new rules kick in December 28, 2026, so get ready to check those planes and avoid costly delays or repairs later.
Analyzed Economic Effects
4 provisions identified: 1 benefits, 3 costs, 0 mixed.
Mandatory fuselage-repair inspections for Boeing 757s
If you own or operate a Boeing Model 757 (-200, -200PF, -200CB, or -300), you must inspect for any existing reinforcing repairs in the fuselage frame lower-lobe areas in section 46 (between stringers S-20 and S-25 from STA 440 to STA 820 and between S-25 and S-28 from STA 1300 to STA 1661) on both left and right sides. You must do the inspections and any on-condition actions in accordance with Boeing Alert Requirements Bulletin 757-53A0129 RB, dated December 8, 2025, beginning on the AD effective date of December 28, 2026.
Estimated inspection cost: $22,355 per airplane; $9.55M total
The FAA estimates the inspection will take up to 263 work-hours at $85 per hour, costing up to $22,355 per airplane. The AD affects 427 U.S.-registered Boeing 757 airplanes, giving an estimated total inspection cost to U.S. operators of up to $9,545,585; the FAA did not provide cost estimates for any needed on-condition repairs.
Repairs must be done before further flight — no extended deadline
The AD requires that any on-condition repair actions identified during inspections must be completed before further flight; the FAA denied requests to extend the compliance time for certain SRM Repair 5 and Repair 6 cases. That means affected airplanes may need immediate repairs and could be grounded until those repairs are done.
Winglet STC won’t require extra AMOC approval
If your Boeing 757 has the scimitar blended winglet Supplemental Type Certificate ST01518SE installed, that installation does not affect your ability to do the AD actions and you do not need a separate "change in product" alternative method of compliance (AMOC) to comply with this AD.
Personalized for You
How does this regulation affect your finances?
Personalize government policy and PRIA will tell you what this federal register document means for your household, plus every other regulation we track. PRIA reads each provision against your financial profile to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-15585, Requirements for Interference-Tolerant Radio Altimeter Systems
In July 2025, President Trump signed the One Big Beautiful Bill Act. Section 40002 of that law re-institutes the Federal Communications Commission's general auction authority and specifically directs the Commission to complete a system of competitive bidding for not less than 100 megahertz in the 3.98-4.2 gigahertz band (Upper C- band). This final rule supports the Federal Communications Commission's July 2026 Report and Order that makes 160 megahertz of the Upper C-band available for terrestrial wireless flexible use via a system of competitive bidding. To ensure safe, efficient, and reliable aviation operations in the presence of wireless signals in the C-band, the Federal Aviation Administration is issuing new regulations that require all radio altimeters to meet specific minimum performance requirements. These new radio altimeters must withstand interference from wireless signals in neighboring spectrum bands and continue to provide accurate altitude readings to both pilots and integrated aircraft safety systems. These regulations require all aircraft equipped with radio altimeters operating under part 121 and those aircraft with radio altimeters operating under part 129 with 30 or more passenger seats or a payload capacity of more than 7,500 pounds to comply with the minimum performance requirements by December 30, 2030, which is prior to the date the Federal Communications Commission authorizes the use of the Upper C-band for new wireless services, as stated in its Report and Order. All other aircraft equipped with radio altimeters that are required to comply with part 91, including aircraft operating under parts 125, 133, 135, 136, 137, 194, and all other aircraft operating under part 129 that are not subject to the initial deadline, must comply with the same minimum performance requirements on or before October 31, 2034.
2026-13440, Enabling Supersonic Overland Flight
The FAA wants to let supersonic planes fly over land again by updating old rules that banned them because of loud sonic booms. Thanks to new tech that keeps booms quiet, this change will open the door for faster, cooler flights across the U.S., helping America lead the world in supersonic travel. People and companies interested in supersonic flight should share their thoughts by August 17, 2026.
2026-13126, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility; Extension of Comment Period
The FAA is giving more time—until August 5, 2026—for people to share their thoughts on new rules that would limit drone flights near important fixed sites like power plants or airports. This affects drone operators and facility owners who want to keep the skies safe and secure. No new costs yet, just extra time to weigh in and help shape the rules.
2026-08943, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility
The FAA is proposing new rules to keep drones away from certain important fixed sites like power plants or airports to keep everyone safe and secure. If you own or operate one of these sites, you can request a drone flight restriction zone to protect your property and people nearby. Comments are open until July 6, 2026, and these changes could affect drone pilots and site operators, but no big costs are expected.
2025-04846, Extension of the Prohibition Against Certain Flights in the Territory and Airspace of Libya
The FAA is extending the ban on certain flights over Libya for three more years, until March 20, 2028. This affects U.S. airlines, commercial operators, and pilots with FAA certificates flying in Libyan airspace, due to ongoing safety risks. The rule also reminds everyone how to apply for special approvals or exemptions if needed.
2025-03853, Enforcement Policy Regarding “Drug and Alcohol Testing of Certificated Repair Station Employees Located Outside of the United States; Correction”
The FAA is giving repair stations outside the U.S. a break by delaying enforcement of new drug and alcohol testing rules until March 20, 2025. This means affected repair stations don’t have to worry about penalties if they aren’t fully following the updated rules just yet. The delay helps everyone get ready without rushing or extra costs.
Previous / Next Documents
Previous: 2026-23686, Air Plan Approval; Arkansas; Update to Materials Incorporated by Reference
The EPA is updating the official Arkansas air quality plan to include the latest approved rules and materials submitted by Arkansas since 2006. This update makes sure the public and officials have the most current information on file, effective November 20, 2026. If you live or work in Arkansas, this keeps air quality rules clear and up-to-date without any new costs or changes to your daily life.
Next: 2026-23689, Cotton Board Rules and Regulations: Adjusting Supplemental Assessment on Imports (2025 Amendments)
Starting January 1, 2027, importers of cotton and cotton products will pay a slightly lower fee to support cotton research and promotion. This change makes sure import fees match those paid on U.S.-grown cotton and updates the fee table to reflect 2025 values. If you bring cotton into the country, get ready for these new numbers that keep the playing field fair and funding steady!