FAA Orders Engine Part Replacements to Prevent In-Flight Shutdowns
Published Date: 2/4/2025
Rule
Summary
The FAA is making sure certain CFM LEAP-1A and LEAP-1C engines stay safe by requiring a key part, the high-pressure turbine rotor seal, to be replaced. This comes after a part failure caused an engine to shut down mid-flight. Engine owners need to act fast to swap out or avoid using these parts, keeping flights smooth and safe without breaking the bank.
Analyzed Economic Effects
2 provisions identified: 0 benefits, 2 costs, 0 mixed.
Required Seal Replacement for LEAP-1A
If you operate aircraft with CFM LEAP-1A engines, the FAA requires the high-pressure turbine (HPT) rotor interstage seal to be removed from service and replaced. The rule was prompted by a part failure that led to an in-flight engine shutdown and is intended to address that unsafe condition.
Prohibition on Installing Affected Seals
The FAA prohibits installing the affected HPT rotor interstage seal parts onto any CFM LEAP-1A or LEAP-1C engine because the part number is interchangeable between those models. This stop-use rule aims to prevent recurrence of the unsafe condition identified in the investigation.
Your PRIA Score
Personalized for You
How does this regulation affect your finances?
Sign up for a PRIA Policy Scan to see your personalized alignment score for this federal register document and every other regulation we track. We analyze your financial profile against policy provisions to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-06506 — Airworthiness Directives; Bombardier Inc. Airplanes
The FAA is making a new rule for Bombardier airplanes to fix a problem where the nose wheel steering can act up during landing. Owners of certain Bombardier CL-600 models must replace specific screws in the nosewheel steering system and update their maintenance plans by May 8, 2026. This keeps flights safe and avoids costly repairs down the road.
2026-06563 — Airworthiness Directives; Airbus SAS Airplanes
The FAA wants Airbus A350-941 owners to fix a problem where some wing and belly parts weren’t tightened right during manufacturing. They’ll need to replace certain parts and add extra protection to keep the plane safe. Comments on this plan are open until May 18, 2026, and the fixes might cost some time and money but will keep flights safe and sound.
2026-06543 — Amendment of Class D and Class E2 Airspace Over Binghamton, NY
The FAA is shrinking the controlled airspace around Greater Binghamton Airport from a 4.4-mile radius to 4.3 miles. This change affects pilots flying near Binghamton, NY, making the airspace a bit tighter but still safe and efficient. The new rules kick in on July 9, 2026, with no extra costs for anyone.
2026-06492 — Airworthiness Directives; Airbus SAS Airplanes
The FAA wants all Airbus A350-941 and -1041 airplanes to replace certain flight control parts that might have been damaged during testing. This change keeps planes safe by banning the use of these risky parts. Airlines need to act before May 18, 2026, and while it might cost some money, it’s all about keeping flights smooth and secure.
2026-06527 — Airworthiness Directives; Honda Aircraft Company LLC Airplanes
If you own a Honda HA-420 airplane, listen up! The FAA says you need to replace your flap control pushrods with new, tougher ones that don’t need constant anti-rust treatments. This new rule kicks in on May 8, 2026, and helps keep your plane safe without extra hassle or cost from repeated maintenance.
2026-06534 — Airworthiness Directives; DG Aviation GmbH (Type Certificate Previously Held by DG Flugzeugbau GmbH) Gliders
If you own or maintain a DG-1000M glider, listen up! The FAA found cracks near the engine mount and is requiring inspections, maintenance updates, and new parts like a carbon fiber bracket to keep your glider safe. These changes kick in April 20, 2026, so get ready to inspect, adjust, and balance before then—safety first, and no surprise costs if you stay on top of it!
Previous / Next Documents
Previous: 2025-02188 — Airworthiness Directives; DAHER AEROSPACE (Type Certificate Previously Held by SOCATA) Airplanes
If you own a DAHER TBM 700 airplane, listen up! The FAA found some parts inside the flap system wearing out, which could cause trouble. You’ll need to clean, check, and maybe replace these parts soon to keep flying safe—don’t worry, some replacements even stop future checks. This fix helps keep your plane in top shape without breaking the bank.
Next: 2025-02208 — List of Approved Spent Fuel Storage Casks: Holtec International HI-STORM UMAX Canister Storage System, Certificate of Compliance No. 1040, Revision 1 to Amendment Nos. 0 Through 2
The NRC updated the rules for storing spent nuclear fuel using Holtec’s HI-STORM UMAX system. This change clarifies radiation safety limits and measurement spots to keep things extra safe. If you use this storage system, these updates kick in now but won’t cost you extra.
Take It Personal
Get Your Personalized Policy View
Start a Free Government Policy Watch to see how policy affects your household, then upgrade to PRIA Full Coverage for year-round monitoring.
Already have an account? Sign in