FAA to Airbus Pilots: Sleeve Up Those Fire-Risky Flight Controls Now
Published Date: 2/13/2025
Proposed Rule
Summary
The FAA wants to make sure certain Airbus Canada airplanes stay safe by checking and fixing parts of their air control systems that didn’t pass fire safety tests. If needed, they’ll add fire-resistant sleeves and stop unsafe parts from being used as replacements. This affects specific BD-500-1A10 and BD-500-1A11 planes and could mean inspections and upgrades soon, helping keep everyone flying safely without surprise costs.
Analyzed Economic Effects
3 provisions identified: 0 benefits, 3 costs, 0 mixed.
Mandatory ECS duct inspections
The FAA proposes inspections of environmental control system (ECS) ducts on Airbus Canada Model BD-500-1A10 and BD-500-1A11 airplanes because certain ducts made from a specific material failed required flammability tests. If adopted, operators of those airplanes would need to inspect the affected ECS ducts as specified in the proposed airworthiness directive.
Required fire‑resistant sleeve installations
The FAA proposes that if an inspected ECS duct is non-compliant, operators must install a fire-resistant sleeve assembly over that non-compliant ECS duct. This installation requirement would apply to affected BD-500-1A10 and BD-500-1A11 airplanes as specified in the proposed directive.
Ban on certain ECS replacement parts
The proposed AD would prohibit installing ECS ducts as replacement parts under certain conditions, by incorporating by reference a Transport Canada AD. Operators of BD-500-1A10 and BD-500-1A11 airplanes would be restricted from using those ECS ducts as replacements when the prohibition applies.
Your PRIA Score
Personalized for You
How does this regulation affect your finances?
Sign up for a PRIA Policy Scan to see your personalized alignment score for this federal register document and every other regulation we track. We analyze your financial profile against policy provisions to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-06506 — Airworthiness Directives; Bombardier Inc. Airplanes
The FAA is making a new rule for Bombardier airplanes to fix a problem where the nose wheel steering can act up during landing. Owners of certain Bombardier CL-600 models must replace specific screws in the nosewheel steering system and update their maintenance plans by May 8, 2026. This keeps flights safe and avoids costly repairs down the road.
2026-06563 — Airworthiness Directives; Airbus SAS Airplanes
The FAA wants Airbus A350-941 owners to fix a problem where some wing and belly parts weren’t tightened right during manufacturing. They’ll need to replace certain parts and add extra protection to keep the plane safe. Comments on this plan are open until May 18, 2026, and the fixes might cost some time and money but will keep flights safe and sound.
2026-06543 — Amendment of Class D and Class E2 Airspace Over Binghamton, NY
The FAA is shrinking the controlled airspace around Greater Binghamton Airport from a 4.4-mile radius to 4.3 miles. This change affects pilots flying near Binghamton, NY, making the airspace a bit tighter but still safe and efficient. The new rules kick in on July 9, 2026, with no extra costs for anyone.
2026-06492 — Airworthiness Directives; Airbus SAS Airplanes
The FAA wants all Airbus A350-941 and -1041 airplanes to replace certain flight control parts that might have been damaged during testing. This change keeps planes safe by banning the use of these risky parts. Airlines need to act before May 18, 2026, and while it might cost some money, it’s all about keeping flights smooth and secure.
2026-06527 — Airworthiness Directives; Honda Aircraft Company LLC Airplanes
If you own a Honda HA-420 airplane, listen up! The FAA says you need to replace your flap control pushrods with new, tougher ones that don’t need constant anti-rust treatments. This new rule kicks in on May 8, 2026, and helps keep your plane safe without extra hassle or cost from repeated maintenance.
2026-06534 — Airworthiness Directives; DG Aviation GmbH (Type Certificate Previously Held by DG Flugzeugbau GmbH) Gliders
If you own or maintain a DG-1000M glider, listen up! The FAA found cracks near the engine mount and is requiring inspections, maintenance updates, and new parts like a carbon fiber bracket to keep your glider safe. These changes kick in April 20, 2026, so get ready to inspect, adjust, and balance before then—safety first, and no surprise costs if you stay on top of it!
Previous / Next Documents
Previous: 2024-31573 — Internal Control Over Financial Reporting
The Farm Credit Administration is giving more time for people to share their thoughts on a new rule that would make some Farm Credit System groups get special combined audits. This change affects certain institutions and aims to keep financial checks extra thorough. If you’re involved, now’s your chance to speak up before the new deadline!
Next: 2025-02506 — Airworthiness Directives; Airbus SAS Airplanes
The FAA wants to make sure certain Airbus A330 planes are super safe by checking some parts that might have been made wrong since 2008. If problems pop up during these regular inspections, repairs will be needed to keep flights safe. This affects airlines with these planes and means they’ll need to spend time and money on these checks and fixes soon.
Take It Personal
Get Your Personalized Policy View
Start a Free Government Policy Watch to see how policy affects your household, then upgrade to PRIA Full Coverage for year-round monitoring.
Already have an account? Sign in