Airbus Helicopters Get New Bearing Checks to Stay Airborne
Published Date: 4/10/2025
Rule
Summary
If you own or work with Airbus Helicopters Model H160-B, listen up! The FAA updated rules to check and fix a key helicopter part called the rotating scissors spherical bearing. Now, inspections happen more often, reporting lasts longer, and you can’t install certain parts unless they meet new safety checks—all to keep flights safe and sound.
Analyzed Economic Effects
5 provisions identified: 0 benefits, 4 costs, 1 mixed.
Repetitive inspections required
If you own or operate an Airbus Helicopters Model H160-B, the FAA now requires repetitive inspections of the rotating scissors spherical bearing. This AD supersedes AD 2024-26-01 and adds repetitive inspections when certain axial play measurements are found.
Installation of affected parts prohibited
The AD prohibits installing an affected rotating scissors spherical bearing on Model H160-B helicopters unless certain requirements are met. The rule references an EASA AD that describes which parts and checks make a bearing allowable for installation.
All serial numbers now covered
The FAA extended the definition of affected parts so that all rotating scissors spherical bearing serial numbers on Model H160-B helicopters are covered by the AD. That means every bearing serial number is now subject to the inspection, reporting, and installation rules.
Reporting requirements extended
The FAA extended the reporting requirements from AD 2024-26-01 for Airbus Helicopters Model H160-B, so you must report inspection results for a longer period. The AD incorporates an EASA AD that specifies the extended reporting obligations.
Initial compliance time revised
The AD revises the initial compliance time required by AD 2024-26-01 for actions on the rotating scissors spherical bearing on Model H160-B helicopters. This change alters when owners or maintainers must first inspect or measure the bearings under the AD.
Your PRIA Score
Personalized for You
How does this regulation affect your finances?
Sign up for a PRIA Policy Scan to see your personalized alignment score for this federal register document and every other regulation we track. We analyze your financial profile against policy provisions to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-06506 — Airworthiness Directives; Bombardier Inc. Airplanes
The FAA is making a new rule for Bombardier airplanes to fix a problem where the nose wheel steering can act up during landing. Owners of certain Bombardier CL-600 models must replace specific screws in the nosewheel steering system and update their maintenance plans by May 8, 2026. This keeps flights safe and avoids costly repairs down the road.
2026-06563 — Airworthiness Directives; Airbus SAS Airplanes
The FAA wants Airbus A350-941 owners to fix a problem where some wing and belly parts weren’t tightened right during manufacturing. They’ll need to replace certain parts and add extra protection to keep the plane safe. Comments on this plan are open until May 18, 2026, and the fixes might cost some time and money but will keep flights safe and sound.
2026-06543 — Amendment of Class D and Class E2 Airspace Over Binghamton, NY
The FAA is shrinking the controlled airspace around Greater Binghamton Airport from a 4.4-mile radius to 4.3 miles. This change affects pilots flying near Binghamton, NY, making the airspace a bit tighter but still safe and efficient. The new rules kick in on July 9, 2026, with no extra costs for anyone.
2026-06492 — Airworthiness Directives; Airbus SAS Airplanes
The FAA wants all Airbus A350-941 and -1041 airplanes to replace certain flight control parts that might have been damaged during testing. This change keeps planes safe by banning the use of these risky parts. Airlines need to act before May 18, 2026, and while it might cost some money, it’s all about keeping flights smooth and secure.
2026-06527 — Airworthiness Directives; Honda Aircraft Company LLC Airplanes
If you own a Honda HA-420 airplane, listen up! The FAA says you need to replace your flap control pushrods with new, tougher ones that don’t need constant anti-rust treatments. This new rule kicks in on May 8, 2026, and helps keep your plane safe without extra hassle or cost from repeated maintenance.
2026-06534 — Airworthiness Directives; DG Aviation GmbH (Type Certificate Previously Held by DG Flugzeugbau GmbH) Gliders
If you own or maintain a DG-1000M glider, listen up! The FAA found cracks near the engine mount and is requiring inspections, maintenance updates, and new parts like a carbon fiber bracket to keep your glider safe. These changes kick in April 20, 2026, so get ready to inspect, adjust, and balance before then—safety first, and no surprise costs if you stay on top of it!
Previous / Next Documents
Previous: 2025-06066 — Airworthiness Directives; Thommen Aircraft Equipment AG Digital Air Data Computers
If you fly planes with THOMMEN AC32 Digital Air Data Computers, listen up! The FAA found some of these devices can stop working in cold weather, which is a big no-no for safe flying. So, they’re requiring owners to swap out the faulty parts ASAP to keep everyone safe and sound.
Next: 2025-06111 — Establishment of Class E Airspace; Blanding Municipal Airport, Blanding, UT
Blanding Municipal Airport in Utah is getting a fresh update to its airspace rules! The new Class E airspace will start at 700 feet above the ground, replacing the old rules that began at 1,200 feet. Pilots flying with instruments will find it easier and safer, and these changes won’t cost anyone extra or cause delays.
Take It Personal
Get Your Personalized Policy View
Start a Free Government Policy Watch to see how policy affects your household, then upgrade to PRIA Full Coverage for year-round monitoring.
Already have an account? Sign in