Bell Helicopters: Remove Those Pesky Door Weights Immediately
Published Date: 4/10/2025
Rule
Summary
If you own or fly a Bell Model 505 helicopter, listen up! The FAA says you must remove all weights from a certain part of the helicopter’s door because some pins might be bent or not working right. This fix needs to happen soon to keep everyone safe and avoid costly problems down the road.
Analyzed Economic Effects
1 provisions identified: 1 benefits, 0 costs, 0 mixed.
Bell 505 Door Ballast Removal Mandate
If you own or operate a Bell Model 505 helicopter in the U.S., the FAA requires you to remove all ballast weights from the aft movable ballast box assembly and prohibits using ballast weights in that assembly. The AD responds to deformation and improper pin engagement in the knuckles of the door hinge and incorporates a Transport Canada emergency AD.
Your PRIA Score
Personalized for You
How does this regulation affect your finances?
Sign up for a PRIA Policy Scan to see your personalized alignment score for this federal register document and every other regulation we track. We analyze your financial profile against policy provisions to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-06506 — Airworthiness Directives; Bombardier Inc. Airplanes
The FAA is making a new rule for Bombardier airplanes to fix a problem where the nose wheel steering can act up during landing. Owners of certain Bombardier CL-600 models must replace specific screws in the nosewheel steering system and update their maintenance plans by May 8, 2026. This keeps flights safe and avoids costly repairs down the road.
2026-06563 — Airworthiness Directives; Airbus SAS Airplanes
The FAA wants Airbus A350-941 owners to fix a problem where some wing and belly parts weren’t tightened right during manufacturing. They’ll need to replace certain parts and add extra protection to keep the plane safe. Comments on this plan are open until May 18, 2026, and the fixes might cost some time and money but will keep flights safe and sound.
2026-06543 — Amendment of Class D and Class E2 Airspace Over Binghamton, NY
The FAA is shrinking the controlled airspace around Greater Binghamton Airport from a 4.4-mile radius to 4.3 miles. This change affects pilots flying near Binghamton, NY, making the airspace a bit tighter but still safe and efficient. The new rules kick in on July 9, 2026, with no extra costs for anyone.
2026-06492 — Airworthiness Directives; Airbus SAS Airplanes
The FAA wants all Airbus A350-941 and -1041 airplanes to replace certain flight control parts that might have been damaged during testing. This change keeps planes safe by banning the use of these risky parts. Airlines need to act before May 18, 2026, and while it might cost some money, it’s all about keeping flights smooth and secure.
2026-06527 — Airworthiness Directives; Honda Aircraft Company LLC Airplanes
If you own a Honda HA-420 airplane, listen up! The FAA says you need to replace your flap control pushrods with new, tougher ones that don’t need constant anti-rust treatments. This new rule kicks in on May 8, 2026, and helps keep your plane safe without extra hassle or cost from repeated maintenance.
2026-06534 — Airworthiness Directives; DG Aviation GmbH (Type Certificate Previously Held by DG Flugzeugbau GmbH) Gliders
If you own or maintain a DG-1000M glider, listen up! The FAA found cracks near the engine mount and is requiring inspections, maintenance updates, and new parts like a carbon fiber bracket to keep your glider safe. These changes kick in April 20, 2026, so get ready to inspect, adjust, and balance before then—safety first, and no surprise costs if you stay on top of it!
Previous / Next Documents
Previous: 2025-06120 — Airworthiness Directives; Airbus Helicopters
If you fly Airbus Helicopters AS332 models, listen up! The FAA wants you to check the tail rotor parts for cracks or corrosion to keep your chopper safe. Fix or replace any damaged parts ASAP, and report what you find—no shortcuts allowed, or you can’t install those parts again.
Next: 2025-06143 — Television Broadcasting Services Monroe, Louisiana
The FCC is switching KLTM-TV in Monroe, Louisiana, from channel 13 to channel 29 to fix reception problems without cutting any service. This change helps the local PBS station reach viewers better and follows a request from the Louisiana Educational Television Authority. No extra costs or service losses are expected, and the update is official once published.
Take It Personal
Get Your Personalized Policy View
Start a Free Government Policy Watch to see how policy affects your household, then upgrade to PRIA Full Coverage for year-round monitoring.
Already have an account? Sign in