Pratt & Whitney Engines Face Mandatory Crack Checks
Published Date: 6/2/2025
Proposed Rule
Summary
The FAA wants to keep certain Pratt & Whitney engines safe by requiring regular special inspections for cracks in key parts. If cracks are found, those parts must be fixed or replaced to avoid engine problems. This affects specific engine models and could mean some downtime and repair costs, but it’s all about keeping flights safe and sound.
Analyzed Economic Effects
3 provisions identified: 1 benefits, 2 costs, 0 mixed.
Addresses engine-separation safety risk
The proposed AD is intended to address an unsafe condition after an event involving an IAE Model PW1127GA-JM engine that experienced HPC 7th-stage integrally bladed rotor (IBR-7) separation, which caused an engine shutdown and an aborted takeoff. The rule aims to reduce the risk of similar engine separations by requiring inspections and removals where needed.
Required repetitive ultrasonic inspections
If you operate the listed Pratt & Whitney engines (F117-PW-100, PW2037, PW2037D, PW2037M, PW2040, PW2040D, PW2043, PW2143, or PW2643), the FAA would require repetitive angled ultrasonic inspections (AUSIs) of certain high-pressure turbine (HPT) 1st-stage disks and turbine hubs to check for cracks. These inspections must be done repeatedly as the proposed airworthiness directive requires.
Mandatory removal and replacement for crack findings
If inspections find crack indications in the specified HPT 1st-stage disks or turbine hubs, those parts must be removed from service and replaced. The proposed AD also requires removal from service of certain HPT lenticular seal assemblies.
Your PRIA Score
Personalized for You
How does this regulation affect your finances?
Sign up for a PRIA Policy Scan to see your personalized alignment score for this federal register document and every other regulation we track. We analyze your financial profile against policy provisions to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-06506 — Airworthiness Directives; Bombardier Inc. Airplanes
The FAA is making a new rule for Bombardier airplanes to fix a problem where the nose wheel steering can act up during landing. Owners of certain Bombardier CL-600 models must replace specific screws in the nosewheel steering system and update their maintenance plans by May 8, 2026. This keeps flights safe and avoids costly repairs down the road.
2026-06563 — Airworthiness Directives; Airbus SAS Airplanes
The FAA wants Airbus A350-941 owners to fix a problem where some wing and belly parts weren’t tightened right during manufacturing. They’ll need to replace certain parts and add extra protection to keep the plane safe. Comments on this plan are open until May 18, 2026, and the fixes might cost some time and money but will keep flights safe and sound.
2026-06543 — Amendment of Class D and Class E2 Airspace Over Binghamton, NY
The FAA is shrinking the controlled airspace around Greater Binghamton Airport from a 4.4-mile radius to 4.3 miles. This change affects pilots flying near Binghamton, NY, making the airspace a bit tighter but still safe and efficient. The new rules kick in on July 9, 2026, with no extra costs for anyone.
2026-06492 — Airworthiness Directives; Airbus SAS Airplanes
The FAA wants all Airbus A350-941 and -1041 airplanes to replace certain flight control parts that might have been damaged during testing. This change keeps planes safe by banning the use of these risky parts. Airlines need to act before May 18, 2026, and while it might cost some money, it’s all about keeping flights smooth and secure.
2026-06527 — Airworthiness Directives; Honda Aircraft Company LLC Airplanes
If you own a Honda HA-420 airplane, listen up! The FAA says you need to replace your flap control pushrods with new, tougher ones that don’t need constant anti-rust treatments. This new rule kicks in on May 8, 2026, and helps keep your plane safe without extra hassle or cost from repeated maintenance.
2026-06534 — Airworthiness Directives; DG Aviation GmbH (Type Certificate Previously Held by DG Flugzeugbau GmbH) Gliders
If you own or maintain a DG-1000M glider, listen up! The FAA found cracks near the engine mount and is requiring inspections, maintenance updates, and new parts like a carbon fiber bracket to keep your glider safe. These changes kick in April 20, 2026, so get ready to inspect, adjust, and balance before then—safety first, and no surprise costs if you stay on top of it!
Previous / Next Documents
Previous: 2025-09895 — Airworthiness Directives; Airbus Helicopters
If you fly Airbus Helicopters AS 332L2 or EC 225LP models, listen up! The FAA wants you to swap out some bolts on the main gearbox suspension bar because the old ones might be too long or bent. You'll also need to check those bolts and tell Airbus what you find—keeping your chopper safe and sound without breaking the bank.
Next: 2025-09931 — Prevailing Rate Systems; Abolishment of Hennepin, Minnesota, as a Nonappropriated Fund Federal Wage System Wage Area
The government is ending the special wage area for nonappropriated fund workers in Hennepin, Minnesota, because fewer people work there now. Most nearby counties will join other wage areas, while some won’t be part of any wage area. This change helps keep pay fair and up-to-date, with no immediate money changes announced.
Take It Personal
Get Your Personalized Policy View
Start a Free Government Policy Watch to see how policy affects your household, then upgrade to PRIA Full Coverage for year-round monitoring.
Already have an account? Sign in