FAA Mandates Checks for Cracks in Airbus A300 Gear
Published Date: 8/18/2025
Rule
Summary
The FAA is making sure certain Airbus A300 planes stay safe by requiring special inspections of the main landing gear parts because some planes had cracks from past fixes done wrong. If cracks are found, repairs must be made quickly to keep flights safe. This affects specific Airbus models and means owners need to act soon to avoid bigger problems and costs later.
Analyzed Economic Effects
2 provisions identified: 0 benefits, 2 costs, 0 mixed.
Mandatory MLG Geometrical Inspections
If you own or operate the listed Airbus A300 models, you must perform a special detailed (geometrical) inspection of the main landing gear (MLG) rib 5 lower flange holes on both the left-hand and right-hand wings. The AD applies to Airbus Model A300 B4-2C, A300 B4-203, A300 B4-603, A300 B4-605R, A300 B4-622, A300 B4-622R, and A300 F4-605R airplanes.
Required Repair If Cracks Found
If inspections find cracking of the MLG support rib 5 lower flange on those Airbus A300 models, you must make repairs to address the unsafe condition. The AD was prompted by cracking caused by incorrect accomplishment of modification instructions and requires repair when necessary.
Your PRIA Score
Personalized for You
How does this regulation affect your finances?
Sign up for a PRIA Policy Scan to see your personalized alignment score for this federal register document and every other regulation we track. We analyze your financial profile against policy provisions to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-06506 — Airworthiness Directives; Bombardier Inc. Airplanes
The FAA is making a new rule for Bombardier airplanes to fix a problem where the nose wheel steering can act up during landing. Owners of certain Bombardier CL-600 models must replace specific screws in the nosewheel steering system and update their maintenance plans by May 8, 2026. This keeps flights safe and avoids costly repairs down the road.
2026-06563 — Airworthiness Directives; Airbus SAS Airplanes
The FAA wants Airbus A350-941 owners to fix a problem where some wing and belly parts weren’t tightened right during manufacturing. They’ll need to replace certain parts and add extra protection to keep the plane safe. Comments on this plan are open until May 18, 2026, and the fixes might cost some time and money but will keep flights safe and sound.
2026-06543 — Amendment of Class D and Class E2 Airspace Over Binghamton, NY
The FAA is shrinking the controlled airspace around Greater Binghamton Airport from a 4.4-mile radius to 4.3 miles. This change affects pilots flying near Binghamton, NY, making the airspace a bit tighter but still safe and efficient. The new rules kick in on July 9, 2026, with no extra costs for anyone.
2026-06492 — Airworthiness Directives; Airbus SAS Airplanes
The FAA wants all Airbus A350-941 and -1041 airplanes to replace certain flight control parts that might have been damaged during testing. This change keeps planes safe by banning the use of these risky parts. Airlines need to act before May 18, 2026, and while it might cost some money, it’s all about keeping flights smooth and secure.
2026-06527 — Airworthiness Directives; Honda Aircraft Company LLC Airplanes
If you own a Honda HA-420 airplane, listen up! The FAA says you need to replace your flap control pushrods with new, tougher ones that don’t need constant anti-rust treatments. This new rule kicks in on May 8, 2026, and helps keep your plane safe without extra hassle or cost from repeated maintenance.
2026-06534 — Airworthiness Directives; DG Aviation GmbH (Type Certificate Previously Held by DG Flugzeugbau GmbH) Gliders
If you own or maintain a DG-1000M glider, listen up! The FAA found cracks near the engine mount and is requiring inspections, maintenance updates, and new parts like a carbon fiber bracket to keep your glider safe. These changes kick in April 20, 2026, so get ready to inspect, adjust, and balance before then—safety first, and no surprise costs if you stay on top of it!
Previous / Next Documents
Previous: 2025-15685 — Airworthiness Directives; Airbus SAS Airplanes
The FAA is making sure certain Airbus A319 and A320 planes stay safe by requiring a one-time detailed check of some rivet holes that might cause damage. If problems are found, fixes must be done, and future modifications need proper rivet installation. This keeps flights safe without ongoing costs but needs quick action from airlines.
Next: 2025-15687 — Airworthiness Directives; Airbus SAS Airplanes
The FAA just issued a new rule for all Airbus A321-271NY airplanes to keep them safe. If certain parts that might cause problems are found, they have to be fixed or removed, and those parts can’t be put back in. This keeps passengers and crews safe without causing big delays or costs.
Take It Personal
Get Your Personalized Policy View
Start a Free Government Policy Watch to see how policy affects your household, then upgrade to PRIA Full Coverage for year-round monitoring.
Already have an account? Sign in