Viking Airplanes Must Check Stabilizer Locks Regularly
Published Date: 8/25/2025
Rule
Summary
If you own a Viking DHC-3 airplane, this new rule means you need to keep checking the stabilizer actuator lock ring to make sure it’s in place and working right. You’ll also have to add a backup part to stop these checks from being needed forever. Don’t install any stabilizer actuators unless they’re approved and safe. These steps help keep your plane safe and avoid costly problems down the road.
Analyzed Economic Effects
3 provisions identified: 0 benefits, 3 costs, 0 mixed.
Repetitive stabilizer lock‑ring inspections
If you own or operate a Viking Model DHC-3 airplane, you must repetitively inspect the stabilizer actuator to confirm the stabilizer actuator lock ring is present, correctly seated in the groove in the upper housing, and engaged in the clamp nut. You must take any applicable corrective actions and apply a witness mark (torque seal) as part of these inspections.
Install secondary retention to stop inspections
For Viking Model DHC-3 airplanes, you must install a secondary retention feature on the stabilizer actuator; installing that secondary retention feature is the terminating action for the repetitive inspections. After installing the secondary retention feature, the repetitive inspections required by this AD end for that actuator.
Ban on installing unserviceable actuators
This AD prohibits installing any stabilizer actuator on Viking Model DHC-3 airplanes unless the actuator is a serviceable part. You must only install actuators that meet the serviceable/approved condition required by the directive.
Your PRIA Score
Personalized for You
How does this regulation affect your finances?
Sign up for a PRIA Policy Scan to see your personalized alignment score for this federal register document and every other regulation we track. We analyze your financial profile against policy provisions to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-06506 — Airworthiness Directives; Bombardier Inc. Airplanes
The FAA is making a new rule for Bombardier airplanes to fix a problem where the nose wheel steering can act up during landing. Owners of certain Bombardier CL-600 models must replace specific screws in the nosewheel steering system and update their maintenance plans by May 8, 2026. This keeps flights safe and avoids costly repairs down the road.
2026-06563 — Airworthiness Directives; Airbus SAS Airplanes
The FAA wants Airbus A350-941 owners to fix a problem where some wing and belly parts weren’t tightened right during manufacturing. They’ll need to replace certain parts and add extra protection to keep the plane safe. Comments on this plan are open until May 18, 2026, and the fixes might cost some time and money but will keep flights safe and sound.
2026-06543 — Amendment of Class D and Class E2 Airspace Over Binghamton, NY
The FAA is shrinking the controlled airspace around Greater Binghamton Airport from a 4.4-mile radius to 4.3 miles. This change affects pilots flying near Binghamton, NY, making the airspace a bit tighter but still safe and efficient. The new rules kick in on July 9, 2026, with no extra costs for anyone.
2026-06492 — Airworthiness Directives; Airbus SAS Airplanes
The FAA wants all Airbus A350-941 and -1041 airplanes to replace certain flight control parts that might have been damaged during testing. This change keeps planes safe by banning the use of these risky parts. Airlines need to act before May 18, 2026, and while it might cost some money, it’s all about keeping flights smooth and secure.
2026-06527 — Airworthiness Directives; Honda Aircraft Company LLC Airplanes
If you own a Honda HA-420 airplane, listen up! The FAA says you need to replace your flap control pushrods with new, tougher ones that don’t need constant anti-rust treatments. This new rule kicks in on May 8, 2026, and helps keep your plane safe without extra hassle or cost from repeated maintenance.
2026-06534 — Airworthiness Directives; DG Aviation GmbH (Type Certificate Previously Held by DG Flugzeugbau GmbH) Gliders
If you own or maintain a DG-1000M glider, listen up! The FAA found cracks near the engine mount and is requiring inspections, maintenance updates, and new parts like a carbon fiber bracket to keep your glider safe. These changes kick in April 20, 2026, so get ready to inspect, adjust, and balance before then—safety first, and no surprise costs if you stay on top of it!
Previous / Next Documents
Previous: 2025-16159 — Revocation of Class D and Class E4 Airspace; Establishment of Class E2 Airspace; Amendment of Class E5 Airspace, Aberdeen, MD
The U.S. Army asked to fix some airspace rules around Aberdeen, MD. This update clears up confusing language about when certain airspace is active, making flying safer and simpler. No new costs or delays—just smoother skies starting now!
Next: 2025-16192 — Migratory Bird Hunting; 2025-26 Seasons for Certain Migratory Game Birds
Hunters, get ready! The 2025-26 migratory bird hunting seasons are set with clear rules on when, where, and how many birds you can hunt. These updates keep bird populations safe while letting you enjoy your sport during the right times and places—no surprises, just fair play.
Take It Personal
Get Your Personalized Policy View
Start a Free Government Policy Watch to see how policy affects your household, then upgrade to PRIA Full Coverage for year-round monitoring.
Already have an account? Sign in