FAA Mandates Extra Checks on Helicopter Rotors
Published Date: 11/20/2025
Rule
Summary
If you fly an Airbus EC225LP helicopter, listen up! The FAA is updating safety rules to keep your main rotor gearboxes in top shape by adding more parts to watch, requiring regular checks and replacements, and tightening who can do the work. These changes kick in December 26, 2025, so owners should prepare for some extra maintenance that helps keep flights safe without breaking the bank.
Analyzed Economic Effects
7 provisions identified: 1 benefits, 5 costs, 1 mixed.
Mandatory 1,000‑hour replacement rule
If you operate an Airbus Helicopters Model EC225LP with the affected parts, within 10 hours time-in-service (TIS) after December 26, 2025 you must determine the total hours TIS of the right‑hand (RH) free wheel shaft. If it has 1,000 or more hours TIS you must replace the main rotor gearbox (MGB) or the RH free wheel shaft before further flight, and you must repeat replacement before any RH free wheel shaft accumulates 1,000 total hours TIS thereafter.
Optional terminating MGB replacement
For EC225LP helicopters with the parts in paragraph (c)(1), you may choose an optional terminating action: install an MGB P/N 332A32-5001-XX, 332A32-5002-XX, or 332A32-5003-XX with a main module (12-roller) and without MOD 07-53016 installed to terminate the AD's repetitive requirements.
Expanded parts applicability added
This AD expands applicability to add MGB part number 332A32-5004-XX with main module P/N 332A32-5400-00. The expanded applicability means helicopters with those MGBs are now subject to the AD's inspection, replacement, placard, and RFM requirements effective December 26, 2025.
Immediate placard and RFM revision
Within 10 hours TIS after December 26, 2025, you must install one or two self-adhesive placards on the instrument panel and revise the limitations section of the rotorcraft flight manual (RFM) by inserting specified text or this AD. The owner/operator with at least a private pilot certificate may make the RFM revision. The FAA estimates installing placards and revising the RFM takes 0.5 work-hour at $85/hour, an estimated $43 per helicopter.
Parts installation limitation rule
As of December 26, 2025, you may not install specified MGB part numbers (including P/Ns 332A32-5001-XX through 332A32-5004-XX with certain modules) on any helicopter unless you have first done the placard and RFM actions required by the AD.
Credit for prior compliant work
If you already performed the AD actions before December 26, 2025 in accordance with Airbus Helicopters Emergency ASB EC225-04A016 Revision 1, 2, or 3 (dates June 28, 2019; July 23, 2019; August 5, 2019), you get credit for the AD's required actions.
Who may perform required replacements changed
The AD changes the requirement for who can replace certain parts: the AD requires the actions be accomplished by persons authorized under 14 CFR 43.3 rather than by a specifically named Airbus Helicopter Specialist.
Your PRIA Score
Personalized for You
How does this regulation affect your finances?
Sign up for a PRIA Policy Scan to see your personalized alignment score for this federal register document and every other regulation we track. We analyze your financial profile against policy provisions to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-06471 — Airworthiness Directives; The Boeing Company Airplanes
The FAA wants to make sure certain Boeing 757-200 airplanes stay safe by checking for cracks in the front cargo area frames, especially those with special cargo loading gear. They’re asking airlines to inspect or review maintenance records and do regular crack checks to catch problems early. Comments on this plan are open until May 18, 2026, and these inspections could mean some extra work and costs for operators.
2026-06459 — Airworthiness Directives; Ontic Engineering and Manufacturing, Inc. Airplanes (Type Certificate Previously Held by M7 Aerospace LLC)
The FAA wants Ontic Engineering and Manufacturing airplane owners to regularly check and fix the pitch trim actuator because some have failed during flight. These inspections and fixes must happen often to keep planes safe, and certain parts can’t be installed unless properly sealed. Comments on this plan are open until May 18, 2026, so owners should prepare for some maintenance costs and deadlines.
2026-06385 — Airworthiness Directives; The Boeing Company Airplanes
The FAA wants all Boeing 757-300 airplanes to get new inspections to catch cracks in key parts of the plane’s frame before they become a problem. Airlines will need to check for past repairs and do regular crack inspections to keep flights safe. Comments on this plan are open until May 18, 2026, and these checks might cost some time and money but will keep everyone flying safely.
2026-06377 — Notice of Final Action of Waiver With Respect to Land; DeWitt Field, Old Town Municipal Airport, Old Town, ME
The FAA has officially approved the release of federal rules on 1.74 acres of land at DeWitt Field in Old Town, Maine, which the city sold without permission in 2023. This means the city is no longer bound by FAA land-use rules for that property, but it doesn’t guarantee any FAA money for the sale. Airport officials and local folks can now move forward with this change, which was finalized in early 2026.
2026-06465 — Airworthiness Directives; Airbus Canada Limited Partnership (Type Certificate Previously Held by C Series Aircraft Limited Partnership (CSALP); Bombardier, Inc.) Airplanes
If you fly Airbus Canada Limited Partnership Model BD-500-1A10 or BD-500-1A11 planes, listen up! The FAA found a problem with a motor that controls air pressure, which could cause safety issues. Starting April 17, 2026, certain flights can’t take off if this motor or related alerts aren’t working right, so operators need to check carefully to keep everyone safe.
2026-06369 — Airworthiness Directives; Bell Textron Canada Limited Helicopters
If you own or fly a Bell Model 505 helicopter, listen up! The FAA found a problem where weights in the back could break loose and hit the tail rotor, which is super dangerous. Starting April 16, 2026, you can’t use those ballast weights anymore, and you’ll need to update your flight manual. This fix keeps everyone safe without costing a fortune, but don’t wait to make the change!
Previous / Next Documents
Previous: 2025-20472 — Federal Reserve Bank Capital Stock
The Federal Reserve is raising the asset threshold that decides how much dividend banks get on their Reserve Bank stock, adjusting it for inflation to $13.18 billion starting January 1, 2026. This change affects banks that own Reserve Bank stock and have total assets near this new cutoff. The update keeps dividend rules fair and reflects the economy’s growth, with the new rule kicking in December 22, 2025.
Next: 2025-20492 — Air Plan Approval; Minnesota; Exempt Source SIP Revision
The EPA is giving a thumbs-up to Minnesota’s updated air rules that make state and federal standards match up better. This change mainly affects small air pollution sources by clarifying their permit rules and adding some new exempt categories. The new rules kick in on December 22, 2025, with no extra costs expected for businesses or the state.
Take It Personal
Get Your Personalized Policy View
Start a Free Government Policy Watch to see how policy affects your household, then upgrade to PRIA Full Coverage for year-round monitoring.
Already have an account? Sign in