Boeing Planes Face Mandatory Checks After Scary Nose Gear Mishap
Published Date: 11/28/2025
Rule
Summary
Starting January 2, 2026, all Boeing 717-200 airplanes must get regular checks on a part called the upper lock link assembly to prevent landing gear problems. This rule comes after a scary incident where the nose gear failed during landing. Airlines will need to inspect and fix this part as needed to keep flights safe and smooth.
Analyzed Economic Effects
5 provisions identified: 2 benefits, 3 costs, 0 mixed.
FAA cost estimates for compliance
The FAA estimates the AD affects 117 U.S.-registered 717-200 airplanes. The ETHF inspection is estimated at 5 work-hours × $85/hour = $425 per inspection cycle (totaling $49,725 per inspection cycle across U.S. operators). If replacement is required, the FAA estimates 9 work-hours × $85/hour = $765 labor plus $17,819 parts, for a total replacement cost of $18,584 per product.
Reduces risk of nose-gear failure
The AD is issued to address an unsafe condition that caused a nose landing gear-up landing; it requires inspections and corrections to reduce the risk that a nose gear will fail to extend or remain retracted during landing, which could increase the risk of a runway excursion. The safety requirement aims to make flights on Boeing 717-200 airplanes safer.
Mandatory inspections for 717-200
If you operate Boeing Model 717-200 airplanes, starting January 2, 2026 you must perform repetitive eddy current high frequency (ETHF) inspections of the upper lock link assembly per Boeing Alert Requirements Bulletin 717-32A0043 RB, dated February 12, 2025. The inspections are required to detect cracking and you must do on-condition actions (including replacement) as specified in the bulletin.
Inspection interval set at 4,800 cycles
The rule requires a repetitive inspection interval of 4,800 flight cycles for the upper lock link assembly; replacement of the assembly with a serviceable part terminates the repetitive inspections. The interval was calculated from crack growth analysis and provides two inspection opportunities between detectability and instability.
New parts made after 2001 exempted
The FAA exempts upper lock link assemblies that were manufactured after December 31, 2001 from the AD's overhaul requirement and includes parts manufactured after that date in the definition of a serviceable assembly. That means assemblies made after December 31, 2001 do not have to be overhauled to be considered serviceable under this AD.
Your PRIA Score
Personalized for You
How does this regulation affect your finances?
Sign up for a PRIA Policy Scan to see your personalized alignment score for this federal register document and every other regulation we track. We analyze your financial profile against policy provisions to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-06506 — Airworthiness Directives; Bombardier Inc. Airplanes
The FAA is making a new rule for Bombardier airplanes to fix a problem where the nose wheel steering can act up during landing. Owners of certain Bombardier CL-600 models must replace specific screws in the nosewheel steering system and update their maintenance plans by May 8, 2026. This keeps flights safe and avoids costly repairs down the road.
2026-06563 — Airworthiness Directives; Airbus SAS Airplanes
The FAA wants Airbus A350-941 owners to fix a problem where some wing and belly parts weren’t tightened right during manufacturing. They’ll need to replace certain parts and add extra protection to keep the plane safe. Comments on this plan are open until May 18, 2026, and the fixes might cost some time and money but will keep flights safe and sound.
2026-06543 — Amendment of Class D and Class E2 Airspace Over Binghamton, NY
The FAA is shrinking the controlled airspace around Greater Binghamton Airport from a 4.4-mile radius to 4.3 miles. This change affects pilots flying near Binghamton, NY, making the airspace a bit tighter but still safe and efficient. The new rules kick in on July 9, 2026, with no extra costs for anyone.
2026-06492 — Airworthiness Directives; Airbus SAS Airplanes
The FAA wants all Airbus A350-941 and -1041 airplanes to replace certain flight control parts that might have been damaged during testing. This change keeps planes safe by banning the use of these risky parts. Airlines need to act before May 18, 2026, and while it might cost some money, it’s all about keeping flights smooth and secure.
2026-06527 — Airworthiness Directives; Honda Aircraft Company LLC Airplanes
If you own a Honda HA-420 airplane, listen up! The FAA says you need to replace your flap control pushrods with new, tougher ones that don’t need constant anti-rust treatments. This new rule kicks in on May 8, 2026, and helps keep your plane safe without extra hassle or cost from repeated maintenance.
2026-06534 — Airworthiness Directives; DG Aviation GmbH (Type Certificate Previously Held by DG Flugzeugbau GmbH) Gliders
If you own or maintain a DG-1000M glider, listen up! The FAA found cracks near the engine mount and is requiring inspections, maintenance updates, and new parts like a carbon fiber bracket to keep your glider safe. These changes kick in April 20, 2026, so get ready to inspect, adjust, and balance before then—safety first, and no surprise costs if you stay on top of it!
Previous / Next Documents
Previous: 2025-21477 — Airworthiness Directives; The Boeing Company Airplanes
If you own or operate Boeing 777 airplanes, listen up! The FAA found more connectors that need fixing to keep flights safe, so they’re updating the rules. Starting January 2, 2026, you’ll need to check, test, or replace certain parts and stop using any faulty ones—this helps prevent problems and keeps everyone flying worry-free.
Next: 2025-21479 — Airworthiness Directives; Airbus SAS Airplanes
If you fly or work with Airbus A350-941 and -1041 planes, listen up! The FAA found some weird noises coming from the nose landing gear and now requires regular checks and fixes to keep things safe. Starting January 2, 2026, these inspections must happen often, and some parts can’t be installed anymore—so airlines should plan for extra maintenance and costs.
Take It Personal
Get Your Personalized Policy View
Start a Free Government Policy Watch to see how policy affects your household, then upgrade to PRIA Full Coverage for year-round monitoring.
Already have an account? Sign in