FAA Proposes Honda Jet Fixes: Tools Gone Wild Inside Planes
Published Date: 1/22/2026
Proposed Rule
Summary
The FAA wants Honda HA-420 airplane owners to update their maintenance manuals to fix tool damage issues inside the plane and add missing safety info. This keeps the planes safe and sound without big costs or delays. Comments on this plan are open until March 9, 2026, so owners and fans can weigh in!
Analyzed Economic Effects
2 provisions identified: 0 benefits, 2 costs, 0 mixed.
Required inspections and repair before 6,000 flights
After updating the ALS, you must perform the actions in Honda Mandatory Service Bulletin SB-420-53-009 (April 26, 2023), including visual inspections and ultrasonic inspections of the fuselage skin and repairs for tool damage. The AD sets the initial compliance as before accumulating 6,000 total flights or within 30 days after the AD's effective date, whichever occurs later, and prohibits alternative actions or intervals unless approved as an AMOC.
Must update maintenance ALS within 30 days
If you own or operate a Honda Model HA-420 (serial numbers 42000012 through 42000230), you must revise the Airworthiness Limitations Section (ALS) of your maintenance manual by incorporating Honda Mandatory Service Bulletin SB-420-53-009 within 30 days after the AD's effective date. The FAA estimates this revision takes 1 work-hour at $85 per airplane, affecting 218 U.S.-registered airplanes for a total estimated cost of $18,530 to U.S. operators.
Your PRIA Score
Personalized for You
How does this regulation affect your finances?
Sign up for a PRIA Policy Scan to see your personalized alignment score for this federal register document and every other regulation we track. We analyze your financial profile against policy provisions to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-06506 — Airworthiness Directives; Bombardier Inc. Airplanes
The FAA is making a new rule for Bombardier airplanes to fix a problem where the nose wheel steering can act up during landing. Owners of certain Bombardier CL-600 models must replace specific screws in the nosewheel steering system and update their maintenance plans by May 8, 2026. This keeps flights safe and avoids costly repairs down the road.
2026-06563 — Airworthiness Directives; Airbus SAS Airplanes
The FAA wants Airbus A350-941 owners to fix a problem where some wing and belly parts weren’t tightened right during manufacturing. They’ll need to replace certain parts and add extra protection to keep the plane safe. Comments on this plan are open until May 18, 2026, and the fixes might cost some time and money but will keep flights safe and sound.
2026-06543 — Amendment of Class D and Class E2 Airspace Over Binghamton, NY
The FAA is shrinking the controlled airspace around Greater Binghamton Airport from a 4.4-mile radius to 4.3 miles. This change affects pilots flying near Binghamton, NY, making the airspace a bit tighter but still safe and efficient. The new rules kick in on July 9, 2026, with no extra costs for anyone.
2026-06492 — Airworthiness Directives; Airbus SAS Airplanes
The FAA wants all Airbus A350-941 and -1041 airplanes to replace certain flight control parts that might have been damaged during testing. This change keeps planes safe by banning the use of these risky parts. Airlines need to act before May 18, 2026, and while it might cost some money, it’s all about keeping flights smooth and secure.
2026-06527 — Airworthiness Directives; Honda Aircraft Company LLC Airplanes
If you own a Honda HA-420 airplane, listen up! The FAA says you need to replace your flap control pushrods with new, tougher ones that don’t need constant anti-rust treatments. This new rule kicks in on May 8, 2026, and helps keep your plane safe without extra hassle or cost from repeated maintenance.
2026-06534 — Airworthiness Directives; DG Aviation GmbH (Type Certificate Previously Held by DG Flugzeugbau GmbH) Gliders
If you own or maintain a DG-1000M glider, listen up! The FAA found cracks near the engine mount and is requiring inspections, maintenance updates, and new parts like a carbon fiber bracket to keep your glider safe. These changes kick in April 20, 2026, so get ready to inspect, adjust, and balance before then—safety first, and no surprise costs if you stay on top of it!
Previous / Next Documents
Previous: 2026-01098 — Establishment of Class E Airspace; Birch Creek Airport, Birch Creek, AK
The FAA wants to create new Class E airspace starting 700 feet above Birch Creek Airport in Alaska to make flying safer and easier for pilots using instruments. This change mainly affects pilots flying in and out of Birch Creek and helps manage air traffic better. If you have thoughts, you’ve got until March 9, 2026, to speak up—no costs for the public, just safer skies!
Next: 2026-01230 — Petition for Rulemaking of Andrew Gonzalez
Andrew Gonzalez wants the Federal Trade Commission to create new rules that require companies to be clear when they use AI to profile customers or change prices. This affects businesses using AI and shoppers who want to know when AI is at work. People have until February 23, 2026, to share their thoughts, and any new rules could change how companies handle AI, possibly impacting prices and transparency.
Take It Personal
Get Your Personalized Policy View
Start a Free Government Policy Watch to see how policy affects your household, then upgrade to PRIA Full Coverage for year-round monitoring.
Already have an account? Sign in