FAA to Pilots: Check Your Embraer Overheat Sensors or Else!
Published Date: 2/25/2026
Proposed Rule
Summary
The FAA wants to make sure certain Embraer ERJ 190-100 ECJ airplanes stay safe by checking and possibly replacing some overheat detection parts that might have slipped through quality checks. Owners need to inspect these parts soon and can’t install any affected replacements. Comments on this plan are open until April 13, 2026, so time’s ticking to weigh in!
Analyzed Economic Effects
1 provisions identified: 0 benefits, 1 costs, 0 mixed.
Operators Must Inspect and Replace Overheat Sensors
If you own or operate Embraer ERJ 190-100 ECJ airplanes, you must perform detailed inspections of certain overheat detection system (ODS) sensing elements and replace them if needed, following ANAC AD 2024-07-01 (effective July 31, 2024) and Embraer Service Bulletin 190LIN-36-0013, Revision 03 (dated April 20, 2024). You also may not install affected ODS sensing elements unless they passed inspection and are marked. The FAA estimates the required inspection work is 108 labor hours at $85/hour ($9,180 per airplane) and that 8 U.S.-registered airplanes are affected (total estimated labor cost $73,440); additional on-condition parts or repair costs were not estimated.
Your PRIA Score
Personalized for You
How does this regulation affect your finances?
Sign up for a PRIA Policy Scan to see your personalized alignment score for this federal register document and every other regulation we track. We analyze your financial profile against policy provisions to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-06506 — Airworthiness Directives; Bombardier Inc. Airplanes
The FAA is making a new rule for Bombardier airplanes to fix a problem where the nose wheel steering can act up during landing. Owners of certain Bombardier CL-600 models must replace specific screws in the nosewheel steering system and update their maintenance plans by May 8, 2026. This keeps flights safe and avoids costly repairs down the road.
2026-06563 — Airworthiness Directives; Airbus SAS Airplanes
The FAA wants Airbus A350-941 owners to fix a problem where some wing and belly parts weren’t tightened right during manufacturing. They’ll need to replace certain parts and add extra protection to keep the plane safe. Comments on this plan are open until May 18, 2026, and the fixes might cost some time and money but will keep flights safe and sound.
2026-06543 — Amendment of Class D and Class E2 Airspace Over Binghamton, NY
The FAA is shrinking the controlled airspace around Greater Binghamton Airport from a 4.4-mile radius to 4.3 miles. This change affects pilots flying near Binghamton, NY, making the airspace a bit tighter but still safe and efficient. The new rules kick in on July 9, 2026, with no extra costs for anyone.
2026-06492 — Airworthiness Directives; Airbus SAS Airplanes
The FAA wants all Airbus A350-941 and -1041 airplanes to replace certain flight control parts that might have been damaged during testing. This change keeps planes safe by banning the use of these risky parts. Airlines need to act before May 18, 2026, and while it might cost some money, it’s all about keeping flights smooth and secure.
2026-06527 — Airworthiness Directives; Honda Aircraft Company LLC Airplanes
If you own a Honda HA-420 airplane, listen up! The FAA says you need to replace your flap control pushrods with new, tougher ones that don’t need constant anti-rust treatments. This new rule kicks in on May 8, 2026, and helps keep your plane safe without extra hassle or cost from repeated maintenance.
2026-06534 — Airworthiness Directives; DG Aviation GmbH (Type Certificate Previously Held by DG Flugzeugbau GmbH) Gliders
If you own or maintain a DG-1000M glider, listen up! The FAA found cracks near the engine mount and is requiring inspections, maintenance updates, and new parts like a carbon fiber bracket to keep your glider safe. These changes kick in April 20, 2026, so get ready to inspect, adjust, and balance before then—safety first, and no surprise costs if you stay on top of it!
Previous / Next Documents
Previous: 2026-03782 — Airworthiness Directives; The Boeing Company Airplanes
The FAA wants Boeing 777 pilots and maintenance crews to regularly check certain landing gear parts for cracks and damage to keep flights safe. These inspections will happen over and over, and if problems pop up, fixes must be done right away. Comments on this plan are open until April 13, 2026, and while it might cost some time and money, it’s all about keeping planes flying safely.
Next: 2026-03791 — Rulemaking Activities Being Discontinued by the NRC
The Nuclear Regulatory Commission (NRC) is stopping three rulemaking projects as of February 25, 2026. This means these rules won’t move forward, and the public won’t see updates about them anymore. People and businesses involved with nuclear safety won’t face new changes or costs from these discontinued rules.
Take It Personal
Get Your Personalized Policy View
Start a Free Government Policy Watch to see how policy affects your household, then upgrade to PRIA Full Coverage for year-round monitoring.
Already have an account? Sign in