FAA Orders Airbus Fastener Replacements for Safety
Published Date: 2/25/2026
Proposed Rule
Summary
The FAA wants Airbus A350-941 planes to fix certain fasteners that didn’t get the right protective coating during production. They’re asking to replace these parts and add extra protection to keep the planes safe. Owners need to comment by April 13, 2026, and get ready for some maintenance work that helps avoid costly problems later.
Analyzed Economic Effects
3 provisions identified: 1 benefits, 2 costs, 0 mixed.
Avoids Lightning-Related Fuel Tank Risk
The FAA says some fasteners may have been produced without double overcoating sealant and some are susceptible to rotation, which could lead to loss of fastener clamping and cracking of the nut sealant cover. If not corrected, this condition could, in the case of a lightning strike, create a risk of a fuel tank explosion and consequent loss of the airplane; the proposed AD aims to remove that unsafe condition.
A350-941 Fasteners Must Be Replaced
If you operate an Airbus A350-941, the FAA proposes that you must replace affected fasteners installed at Frame 46 and Frame 49 on both left- and right-hand sides of the center wing box and apply additional head nut cap protection (for example, sealant and corrosion-inhibiting protection) in accordance with EASA AD 2025-0210. The rule would require operators to follow all actions and compliance times specified in EASA AD 2025-0210 as incorporated by reference.
Estimated Per-Airplane Compliance Cost
The FAA estimates the maintenance action will take 64 work-hours at $85 per hour (labor $5,440) plus parts costing $480, for a total estimated cost per airplane of $5,920. The FAA estimates this AD, if adopted as proposed, would affect 5 airplanes of U.S. registry, for a total cost on U.S. operators of $29,600.
Your PRIA Score
Personalized for You
How does this regulation affect your finances?
Sign up for a PRIA Policy Scan to see your personalized alignment score for this federal register document and every other regulation we track. We analyze your financial profile against policy provisions to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-06506 — Airworthiness Directives; Bombardier Inc. Airplanes
The FAA is making a new rule for Bombardier airplanes to fix a problem where the nose wheel steering can act up during landing. Owners of certain Bombardier CL-600 models must replace specific screws in the nosewheel steering system and update their maintenance plans by May 8, 2026. This keeps flights safe and avoids costly repairs down the road.
2026-06563 — Airworthiness Directives; Airbus SAS Airplanes
The FAA wants Airbus A350-941 owners to fix a problem where some wing and belly parts weren’t tightened right during manufacturing. They’ll need to replace certain parts and add extra protection to keep the plane safe. Comments on this plan are open until May 18, 2026, and the fixes might cost some time and money but will keep flights safe and sound.
2026-06543 — Amendment of Class D and Class E2 Airspace Over Binghamton, NY
The FAA is shrinking the controlled airspace around Greater Binghamton Airport from a 4.4-mile radius to 4.3 miles. This change affects pilots flying near Binghamton, NY, making the airspace a bit tighter but still safe and efficient. The new rules kick in on July 9, 2026, with no extra costs for anyone.
2026-06492 — Airworthiness Directives; Airbus SAS Airplanes
The FAA wants all Airbus A350-941 and -1041 airplanes to replace certain flight control parts that might have been damaged during testing. This change keeps planes safe by banning the use of these risky parts. Airlines need to act before May 18, 2026, and while it might cost some money, it’s all about keeping flights smooth and secure.
2026-06527 — Airworthiness Directives; Honda Aircraft Company LLC Airplanes
If you own a Honda HA-420 airplane, listen up! The FAA says you need to replace your flap control pushrods with new, tougher ones that don’t need constant anti-rust treatments. This new rule kicks in on May 8, 2026, and helps keep your plane safe without extra hassle or cost from repeated maintenance.
2026-06534 — Airworthiness Directives; DG Aviation GmbH (Type Certificate Previously Held by DG Flugzeugbau GmbH) Gliders
If you own or maintain a DG-1000M glider, listen up! The FAA found cracks near the engine mount and is requiring inspections, maintenance updates, and new parts like a carbon fiber bracket to keep your glider safe. These changes kick in April 20, 2026, so get ready to inspect, adjust, and balance before then—safety first, and no surprise costs if you stay on top of it!
Previous / Next Documents
Previous: 2026-03793 — Airworthiness Directives; Airbus SAS Airplanes
The FAA wants to update safety rules for certain Airbus airplanes to include more models and clarify repair steps. Pilots and airlines flying these planes will need to keep checking door parts for cracks and fix them if needed. Comments on this plan are open until April 13, 2026, and these changes help keep flights safe without big costs.
Next: 2026-03796 — Amendment of Class E5 Airspace Over Elizabeth City, NC
The FAA wants to expand the special flying zone (Class E5 airspace) around Elizabeth City, NC, to include a 6-mile radius around the Sentara Albemarle Medical Center Heliport, starting 700 feet above the ground. This change supports new flight procedures for safer helicopter landings and takeoffs. Pilots and local air traffic will be affected, and the public can share their thoughts by April 13, 2026—no extra costs involved!
Take It Personal
Get Your Personalized Policy View
Start a Free Government Policy Watch to see how policy affects your household, then upgrade to PRIA Full Coverage for year-round monitoring.
Already have an account? Sign in