Seats Falling Apart? FAA Demands Glue Fixes on Bombardier Jets
Published Date: 2/26/2026
Proposed Rule
Summary
The FAA wants Bombardier BD-700 airplanes fixed because some seat frames were put together without the right glue, which could be unsafe. They’re asking owners to modify certain seat fasteners to keep everyone safe. Comments on this fix are open until April 13, 2026, so affected operators should act soon to avoid bigger costs or risks.
Analyzed Economic Effects
2 provisions identified: 1 benefits, 1 costs, 0 mixed.
Fix missing Loctite on seat frames
If you fly on Bombardier Model BD-700-1A10, BD-700-1A11, or BD-700-2A12 airplanes, the FAA proposes a rule requiring modification of certain seat frame non-locking fastener joints (apply Loctite and install new screws) to address assemblies found without Loctite. Transport Canada AD CF-2025-41 (dated August 20, 2025) describes the required modification to restore seat belt anchor and backrest locking integrity.
Compliance costs for U.S. operators
The FAA estimates this proposed AD would affect 42 U.S.-registered BD-700 airplanes and cost up to 34 work-hours × $85/hour = $2,890 in labor plus up to $134 in parts, for a cost per airplane of up to $3,024 and a total cost on U.S. operators of up to $127,008. The manufacturer has stated some or all costs may be covered under warranty, which could reduce the out-of-pocket expense for operators.
Your PRIA Score
Personalized for You
How does this regulation affect your finances?
Sign up for a PRIA Policy Scan to see your personalized alignment score for this federal register document and every other regulation we track. We analyze your financial profile against policy provisions to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-06506 — Airworthiness Directives; Bombardier Inc. Airplanes
The FAA is making a new rule for Bombardier airplanes to fix a problem where the nose wheel steering can act up during landing. Owners of certain Bombardier CL-600 models must replace specific screws in the nosewheel steering system and update their maintenance plans by May 8, 2026. This keeps flights safe and avoids costly repairs down the road.
2026-06563 — Airworthiness Directives; Airbus SAS Airplanes
The FAA wants Airbus A350-941 owners to fix a problem where some wing and belly parts weren’t tightened right during manufacturing. They’ll need to replace certain parts and add extra protection to keep the plane safe. Comments on this plan are open until May 18, 2026, and the fixes might cost some time and money but will keep flights safe and sound.
2026-06543 — Amendment of Class D and Class E2 Airspace Over Binghamton, NY
The FAA is shrinking the controlled airspace around Greater Binghamton Airport from a 4.4-mile radius to 4.3 miles. This change affects pilots flying near Binghamton, NY, making the airspace a bit tighter but still safe and efficient. The new rules kick in on July 9, 2026, with no extra costs for anyone.
2026-06492 — Airworthiness Directives; Airbus SAS Airplanes
The FAA wants all Airbus A350-941 and -1041 airplanes to replace certain flight control parts that might have been damaged during testing. This change keeps planes safe by banning the use of these risky parts. Airlines need to act before May 18, 2026, and while it might cost some money, it’s all about keeping flights smooth and secure.
2026-06527 — Airworthiness Directives; Honda Aircraft Company LLC Airplanes
If you own a Honda HA-420 airplane, listen up! The FAA says you need to replace your flap control pushrods with new, tougher ones that don’t need constant anti-rust treatments. This new rule kicks in on May 8, 2026, and helps keep your plane safe without extra hassle or cost from repeated maintenance.
2026-06534 — Airworthiness Directives; DG Aviation GmbH (Type Certificate Previously Held by DG Flugzeugbau GmbH) Gliders
If you own or maintain a DG-1000M glider, listen up! The FAA found cracks near the engine mount and is requiring inspections, maintenance updates, and new parts like a carbon fiber bracket to keep your glider safe. These changes kick in April 20, 2026, so get ready to inspect, adjust, and balance before then—safety first, and no surprise costs if you stay on top of it!
Previous / Next Documents
Previous: 2026-03805 — Airworthiness Directives; ATR-GIE Avions de Transport Régional Airplanes
The FAA wants all ATR42-200, -300, and -320 airplanes checked for worn flap parts that could cause safety problems. They’re asking for a special inspection and fixes if needed to keep flights safe. Comments on this plan are open until April 13, 2026, and airlines should be ready to act soon to avoid costly issues.
Next: 2026-03807 — Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA wants Bombardier BD-700-1A10 and BD-700-1A11 airplane owners to check and fix bolts on the baggage door because wrong tools might have been used before. This means inspecting, tightening, or replacing bolts to keep flights safe. Comments on this plan are open until April 13, 2026, so owners should act soon to avoid safety risks and possible costs.
Take It Personal
Get Your Personalized Policy View
Start a Free Government Policy Watch to see how policy affects your household, then upgrade to PRIA Full Coverage for year-round monitoring.
Already have an account? Sign in