FAA Orders Checks on Lycoming Engine Rods for Safety
Published Date: 3/4/2026
Rule
Summary
If you own or work with certain Lycoming airplane engines, this new rule means you need to keep checking and possibly replace some connecting rod parts to keep engines safe. The FAA found more parts that could cause trouble, so they’re expanding the inspections and replacements starting April 8, 2026. This helps prevent engine failures but might cost some time and money for parts and labor.
Analyzed Economic Effects
3 provisions identified: 0 benefits, 3 costs, 0 mixed.
Bushing replacement required as fix
As a terminating action, you must replace connecting rod bushings with parts eligible for installation (P/N 01K28983 or AEL13923, or assemblies P/N AEL11750, AEL78030, SL78030, SL77450, SL13937, SL19332, SL11750, SL13422). Affected part ship date range is 01/30/2009–09/09/2021. The FAA estimates replacement cost per bushing at $762 (4.5 work-hours at $85/hour plus $380 parts) and estimates total U.S. operator cost of $34,405,824 for replacements across affected engines.
Routine oil-screen checks required
Starting April 8, 2026, if your airplane has a listed Lycoming part, you must inspect the engine oil filter, oil pressure screen, or oil suction screen at the next oil change or within 4 months (whichever is first) and at every oil change until the connecting rod bushings are replaced. The FAA estimates this AD affects 45,152 U.S.-registered engines and estimates a per-inspection cost of $235 (2 work-hours at $85/hour plus $65 parts).
Immediate bushing checks if metal found
If any bronze metal particulates are found during an inspection, you must, before further flight, inspect all affected connecting rod bushings for damage, fit, movement, and wear following Lycoming MSB 630B; a connecting-rod-bushing inspection is estimated at $85 (1 work-hour at $85/hour). Owner/operators holding at least a private pilot certificate may perform the oil-screen inspections and must log compliance in aircraft records per 14 CFR 43.9(a) and 91.417(a)(2)(v).
Your PRIA Score
Personalized for You
How does this regulation affect your finances?
Sign up for a PRIA Policy Scan to see your personalized alignment score for this federal register document and every other regulation we track. We analyze your financial profile against policy provisions to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-06471 — Airworthiness Directives; The Boeing Company Airplanes
The FAA wants to make sure certain Boeing 757-200 airplanes stay safe by checking for cracks in the front cargo area frames, especially those with special cargo loading gear. They’re asking airlines to inspect or review maintenance records and do regular crack checks to catch problems early. Comments on this plan are open until May 18, 2026, and these inspections could mean some extra work and costs for operators.
2026-06459 — Airworthiness Directives; Ontic Engineering and Manufacturing, Inc. Airplanes (Type Certificate Previously Held by M7 Aerospace LLC)
The FAA wants Ontic Engineering and Manufacturing airplane owners to regularly check and fix the pitch trim actuator because some have failed during flight. These inspections and fixes must happen often to keep planes safe, and certain parts can’t be installed unless properly sealed. Comments on this plan are open until May 18, 2026, so owners should prepare for some maintenance costs and deadlines.
2026-06385 — Airworthiness Directives; The Boeing Company Airplanes
The FAA wants all Boeing 757-300 airplanes to get new inspections to catch cracks in key parts of the plane’s frame before they become a problem. Airlines will need to check for past repairs and do regular crack inspections to keep flights safe. Comments on this plan are open until May 18, 2026, and these checks might cost some time and money but will keep everyone flying safely.
2026-06377 — Notice of Final Action of Waiver With Respect to Land; DeWitt Field, Old Town Municipal Airport, Old Town, ME
The FAA has officially approved the release of federal rules on 1.74 acres of land at DeWitt Field in Old Town, Maine, which the city sold without permission in 2023. This means the city is no longer bound by FAA land-use rules for that property, but it doesn’t guarantee any FAA money for the sale. Airport officials and local folks can now move forward with this change, which was finalized in early 2026.
2026-06465 — Airworthiness Directives; Airbus Canada Limited Partnership (Type Certificate Previously Held by C Series Aircraft Limited Partnership (CSALP); Bombardier, Inc.) Airplanes
If you fly Airbus Canada Limited Partnership Model BD-500-1A10 or BD-500-1A11 planes, listen up! The FAA found a problem with a motor that controls air pressure, which could cause safety issues. Starting April 17, 2026, certain flights can’t take off if this motor or related alerts aren’t working right, so operators need to check carefully to keep everyone safe.
2026-06369 — Airworthiness Directives; Bell Textron Canada Limited Helicopters
If you own or fly a Bell Model 505 helicopter, listen up! The FAA found a problem where weights in the back could break loose and hit the tail rotor, which is super dangerous. Starting April 16, 2026, you can’t use those ballast weights anymore, and you’ll need to update your flight manual. This fix keeps everyone safe without costing a fortune, but don’t wait to make the change!
Previous / Next Documents
Previous: 2026-04280 — Airworthiness Directives; BRP-Rotax GmbH & Co KG (Formerly BRP-POWERTRAIN GMBH & CO KG and Bombardier-Rotax GmbH) Engines
If you own or operate aircraft with BRP-Rotax Model 915 iSc2 C24 or 915 iSc3 C24 engines, listen up! The FAA found some engines missing a key collar nut on the propeller gearbox, which could be unsafe. Starting March 19, 2026, you’ll need to check your propeller gearbox and replace it if that nut is missing—better safe than sorry, and no big surprise costs unless a fix is needed.
Next: 2026-04311 — Fisheries of the Exclusive Economic Zone Off Alaska; Pacific Cod by Vessels Using Pot Gear in the Central Regulatory Area of the Gulf of Alaska
Starting March 2, 2026, fishing for Pacific cod using pot gear in the Central Gulf of Alaska is temporarily closed to keep the catch within safe limits. This affects fishermen using pot gear who must stop targeting Pacific cod until September 1, 2026, helping protect the fish population and future fishing opportunities. No extra money is involved, but this rule keeps the fishery sustainable and fair.
Take It Personal
Get Your Personalized Policy View
Start a Free Government Policy Watch to see how policy affects your household, then upgrade to PRIA Full Coverage for year-round monitoring.
Already have an account? Sign in