FAA Proposes Stricter Inspections for MHI RJ Aviation Planes
Published Date: 3/17/2026
Proposed Rule
Summary
The FAA wants to update safety rules for certain MHI RJ Aviation regional jets (formerly Bombardier models) by adding stricter maintenance checks. This means airlines must follow new or tougher inspection schedules to keep these planes safe. Comments on this proposal are open until May 1, 2026, and while it may cost some money, it’s all about keeping passengers flying safely.
Analyzed Economic Effects
2 provisions identified: 1 benefits, 1 costs, 0 mixed.
Operators Must Update Maintenance Programs
If you operate the listed MHI RJ (formerly Bombardier) models, you must revise your maintenance or inspection program to add new or more restrictive airworthiness limitations. The rule applies to Model CL-600-2C10, CL-600-2C11, CL-600-2D15, and CL-600-2D24 airplanes, affects 589 U.S.-registered airplanes, and requires compliance within 30 days after the AD's effective date (or at the specified threshold/discard time). The FAA estimates revising programs averages 90 work-hours per operator (90 x $85/hr = $7,650 per operator).
Stricter Inspections to Prevent Structural Failure
The AD requires adding new or more restrictive structural inspections and safe-life limits to address an unsafe condition that could lead to loss of structural integrity. The requirement incorporates Transport Canada AD CF-2025-26 (dated May 6, 2025) and applies to the same CL-600-series regional jet models listed in the proposed rule to improve safety for passengers and crews.
Your PRIA Score
Personalized for You
How does this regulation affect your finances?
Sign up for a PRIA Policy Scan to see your personalized alignment score for this federal register document and every other regulation we track. We analyze your financial profile against policy provisions to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-06506 — Airworthiness Directives; Bombardier Inc. Airplanes
The FAA is making a new rule for Bombardier airplanes to fix a problem where the nose wheel steering can act up during landing. Owners of certain Bombardier CL-600 models must replace specific screws in the nosewheel steering system and update their maintenance plans by May 8, 2026. This keeps flights safe and avoids costly repairs down the road.
2026-06563 — Airworthiness Directives; Airbus SAS Airplanes
The FAA wants Airbus A350-941 owners to fix a problem where some wing and belly parts weren’t tightened right during manufacturing. They’ll need to replace certain parts and add extra protection to keep the plane safe. Comments on this plan are open until May 18, 2026, and the fixes might cost some time and money but will keep flights safe and sound.
2026-06543 — Amendment of Class D and Class E2 Airspace Over Binghamton, NY
The FAA is shrinking the controlled airspace around Greater Binghamton Airport from a 4.4-mile radius to 4.3 miles. This change affects pilots flying near Binghamton, NY, making the airspace a bit tighter but still safe and efficient. The new rules kick in on July 9, 2026, with no extra costs for anyone.
2026-06492 — Airworthiness Directives; Airbus SAS Airplanes
The FAA wants all Airbus A350-941 and -1041 airplanes to replace certain flight control parts that might have been damaged during testing. This change keeps planes safe by banning the use of these risky parts. Airlines need to act before May 18, 2026, and while it might cost some money, it’s all about keeping flights smooth and secure.
2026-06527 — Airworthiness Directives; Honda Aircraft Company LLC Airplanes
If you own a Honda HA-420 airplane, listen up! The FAA says you need to replace your flap control pushrods with new, tougher ones that don’t need constant anti-rust treatments. This new rule kicks in on May 8, 2026, and helps keep your plane safe without extra hassle or cost from repeated maintenance.
2026-06534 — Airworthiness Directives; DG Aviation GmbH (Type Certificate Previously Held by DG Flugzeugbau GmbH) Gliders
If you own or maintain a DG-1000M glider, listen up! The FAA found cracks near the engine mount and is requiring inspections, maintenance updates, and new parts like a carbon fiber bracket to keep your glider safe. These changes kick in April 20, 2026, so get ready to inspect, adjust, and balance before then—safety first, and no surprise costs if you stay on top of it!
Previous / Next Documents
Previous: 2026-05223 — Airworthiness Directives; Airbus SAS Airplanes
The FAA wants Airbus A350-941 and -1041 airplane owners to check and fix broken parts in the galleys near door 4 to keep flights safe. They’ll need to inspect, replace, and re-label certain attachment studs, and can’t install the old parts anymore. Comments are open until May 1, 2026, and these fixes might cost some time and money but keep everyone flying safely.
Next: 2026-05250 — Magnuson-Stevens Fishery Conservation and Management Act Provisions; Fisheries of the Northeastern United States; Northeast Multispecies Fishery; Amendment 25 (Revised)
This update affects fishermen and fish lovers in the Northeast by changing how Atlantic cod stocks are managed to stop overfishing and help fish populations grow. It sets new rules for both commercial and recreational fishing, aiming for a healthy balance that benefits everyone. Comments on these changes are open until April 17, 2026, so now’s the time to speak up!
Take It Personal
Get Your Personalized Policy View
Start a Free Government Policy Watch to see how policy affects your household, then upgrade to PRIA Full Coverage for year-round monitoring.
Already have an account? Sign in