Chapter 7. DEPARTMENT OF HEALTH SERVICES - RADIATION CONTROL

Notes Ariz. Admin. Code § R9-7-1411 Section R9-7-1411 reserved when this Chapter was recodified from 12 A.A.C. 1 (Supp. 18-1).

A registrant shall establish and maintain written policies and procedures that are part of a radiation safety program to assure compliance with the requirements in R9-7-1412 through R9-7-1416. Notes Ariz. Admin. Code § R9-7-1412 New Section R9-7-1412 recodified from R12-1-1412 at…

A. A registrant operating a tanning facility shall use sunlamp products that are certified by the manufacturer to comply with 21 CFR 1040.20, April 1, 2004, which is incorporated by reference, published by the Office of Federal Register National Archives and Records Administratio…

A. A registrant shall ensure that at least one operator is present during operating hours. The operator shall: 1. Limit the occupancy of the tanning room to one person when the tanning equipment is in use; 2. Prevent use of the tanning equipment by anyone under 18 years of age un…

A. A registrant shall post the warning sign shown in this subsection within 1 meter (39.37 inches) of each tanning device, ensuring that the sign is clearly visible and easily viewed by the user before the tanning device is operated. B. A registrant shall post a warning sign, whi…

A. A registrant shall report any incident involving an eye injury; skin burn; fall injury, if the fall occurs within the tanning device or while entering or exiting the device; laceration; infection believed to have been transmitted by use of the tanning device; or any other inju…

Notes Ariz. Admin. Code § R9-7-1417 Section R9-7-1417 reserved when this Chapter was recodified from 12 A.A.C. 1 (Supp. 18-1).

A person shall register with the Department any HID lamp that does not meet the requirements in 21 CFR 1040.30, April 1, 2004, which is incorporated by reference, published by the Office of Federal Register National Archives and Records Administration, Washington, D.C. 20408, and…

Notes Ariz. Admin. Code § R9-7-1419 Section R9-7-1419 reserved when this Chapter was recodified from 12 A.A.C. 1 (Supp. 18-1).

Notes Ariz. Admin. Code § R9-7-1420 Section R9-7-1420 reserved when this Chapter was recodified from 12 A.A.C. 1 (Supp. 18-1).

A. The requirements contained in this Section apply to laser products that are used in accordance with the manufacturer's classification and instructions. If certain engineering controls are impractical during manufacture or research and development activities, the LSO shall spec…

A. A registrant shall ensure that each laser product has a protective housing that prevents access to laser and collateral radiation if it exceeds the exposure limits for Class 1 lasers in R9-7-1426. If a laser's accessible emission levels must exceed the limits for Class 1 laser…

A. A registrant shall not require or permit an individual to look directly into a laser beam or directly at specular reflections of a laser beam, or align a laser by eye while looking along the axis of the laser beam if the intensity of the beam or the beam's reflections exceeds …

Notes Ariz. Admin. Code § R9-7-1424 Section R9-7-1424 reserved when this Chapter was recodified from 12 A.A.C. 1 (Supp. 18-1).

A. Each laser product is classified on the basis of emission level, emission duration, and wavelength of accessible laser radiation emitted over the full range of resulting operational capability, any time during the useful life of the product, according to the federal performanc…

A. A registrant shall not use, or permit the use of a laser product that will result in a human exposure that exceeds the applicable MPE or accessible emission limit (AEL) listed in ANSI Z136.1-2000, American National Standard for Safe Use of Lasers, 2000 edition, which is incorp…

A. Except as otherwise authorized by the Department, a registrant shall use signs, symbols, and labels prescribed by this Section and the design and colors specified in ANSI Z136.1-2000, American National Standard for Safe Use of Lasers, 2000 edition, which is incorporated by ref…

Notes Ariz. Admin. Code § R9-7-1428 Section R9-7-1428 reserved when this Chapter was recodified from 12 A.A.C. 1 (Supp. 18-1).

Unless other methods are approved by the Department, a registrant shall post each laser facility in accordance with ANSI Z136.1-2000, American National Standard for Safe Use of Lasers, 2000 edition, which is incorporated by reference, published by the Laser Institute of America, …

Notes Ariz. Admin. Code § R9-7-1430 Section R9-7-1430 reserved when this Chapter was recodified from 12 A.A.C. 1 (Supp. 18-1).

Notes Ariz. Admin. Code § R9-7-1431 Section R9-7-1431 reserved when this Chapter was recodified from 12 A.A.C. 1 (Supp. 18-1).

Notes Ariz. Admin. Code § R9-7-1432 Section R9-7-1432 reserved when this Chapter was recodified from 12 A.A.C. 1 (Supp. 18-1).

A. A registrant shall establish a controlled area for a laser if it is possible for a person to be exposed to laser radiation from a Class 3b laser, except a Class 3b laser of less than 5 milliwatts visible peak power, or a Class 4 laser that exceeds the applicable MPE or AEL in …

A. Each registrant shall designate a Laser Safety Officer (LSO). B. The LSO shall administer the laser radiation protection program and shall: 1. Ensure that maintenance or service for Class 3b and Class 4 lasers is performed only by technicians trained to provide the maintenance…

A. A registrant shall require that protective eyewear, as specified by the LSO, be worn by an individual who has access to: 1. Class 4 laser radiation; or 2. Class 3b laser radiation. B. A registrant shall, through the LSO, provide protective eye-wear that is: 1. Marked with a la…

A. A registrant shall notify the Department by telephone within 24 hours of any incident that has caused or may have caused: 1. Permanent loss of sight in either eye; or 2. Third-degree burns of the skin involving more than 5 percent of the body surface as estimated by the rule o…

A registrant operating a laser system with an unenclosed beam path shall: 1. Conduct an evaluation before operating the laser to determine the expected beam path and the potential hazards from reflective surfaces. Based on the evaluation the registrant shall exclude reflective su…

A. Registration. A person who seeks to perform hair reduction or other cosmetic procedures shall apply for registration of any medical laser or IPL device that is a Class II surgical device, certified as complying with the labeling standards in 21 CFR 801.109, revised April 1, 20…

A. A person seeking to initiate a medical laser or IPL laser technician training program shall submit an application to the Department for certification that contains a description of the training program. In addition, the person shall submit a syllabus and a test that consists o…

A. A registrant shall ensure that a Class 3 and Class 4 laser product used in the practice of medicine has a means for measuring the level of laser radiation with an error in measurement of no greater than +20%, when calibrated in accordance with the laser product manufacturer's …

A. Before a conducting laser light show or laser demonstration, a registrant shall provide documentation to the Department that a variance from 21 CFR 1040.10 has been obtained from the FDA. B. A registrant shall notify the Department in writing, at least three working days in be…

A registrant shall take measurements to determine MPE values in a manner consistent with the procedures contained in ANSI Z136.1-2000, American National Standard for Safe Use of Lasers, 2000 edition, which is incorporated by reference, published by the Laser Institute of America,…

A registrant shall ensure that the radiation output measurement is performed with an instrument that is calibrated and designed for use with the laser that is being evaluated for compliance. The registrant shall specify the date of calibration, accuracy of calibration, wave- leng…

A. A registrant shall measure accessible emission for classification: 1. Under the operational conditions and procedures that maximize accessible emission levels, including start-up, stabilized operation, and shutdown of the laser or laser facility; 2. With all controls and adjus…

A. A person shall not transport radioactive material or deliver radioactive material to a carrier for transport unless the person is authorized in a general or specific license issued by the Department or exempt under R9-7-103(A). B. This Article applies to any licensee to transf…

Terms defined in Article 1 have the same meaning when used in this Article. Notes Ariz. Admin. Code § R9-7-1502 New Section R9-7-1502 recodified from R12-1-1502 at 24 A.A.R. 813, effective March 22, 2018 (Supp. 18-1).

Each licensee that transports licensed material outside the site of usage, as specified in a Department license, or where transport is on public highways, or that delivers licensed material to a carrier for transport, shall comply with the applicable requirements of the U.S. Depa…

A. A general license is issued to: 1. Any common or contract carrier not exempt under R9-7-103 to receive, possess, transport, and store radioactive material in the regular course of carriage for others or to store radioactive material incident to the transport activities, provid…

A. A carrier shall not store, for any period in excess of 72 hours, any package that contains radioactive material bearing a Department of Transportation Yellow II or Yellow III label, unless the radioactive material is stored in an area other than, and not adjacent to, any food …

A licensee shall not deliver any package that contains radioactive material to a carrier for transport or transport radioactive material, unless the licensee: 1. Complies with the U.S. Department of Transportation packaging, monitoring, manifesting, marking, and labeling regulati…

A. A licensee that transports radioactive material in the course of business or delivers radioactive material to a carrier for transport in a package for which a license, certificate of compliance, applicant for a certificate of compliance, or other approval has been issued by th…

A. Prior to the transport of any nuclear waste, as defined in Article 1, outside of the confines of the licensee's facility or other place of use or storage, or prior to the delivery of any nuclear wasteto a carrier for transport, each licensee shall provide advance notification …

A. A general license is issued to any licensee of the Department to transport fissile material in the form of plutonium-beryllium (Pu-Be) special form sealed sources, or to deliver Pu-Be sealed sources to a carrier for transport, if the material is shipped in accordance with this…

A. A general license is issued to any licensee to transport, or to deliver to a carrier for transport, licensed material in a package for which a license, certificate of compliance, or other approval has been issued by the NRC. 1. This general license applies only to a licensee t…

A. Notwithstanding the provisions of any general licenses and notwithstanding any exemptions stated directly in this Section or included indirectly by citation of 49 CFR 107, and 171 through 180, previously incorporated in this Article, as may be applicable, the licensee shall en…

A. A licensee shall provide advance notification to the Governor, or the Director of the Department, of the shipment of licensed material as specified in 10 CFR 71.97, revised January 1, 2015, incorporated by reference, and available under R9-7-101. This incorporated material con…

Before delivery of a package to a carrier for transport, the licensee shall ensure that any special instructions needed to safely open the package have been sent to, or otherwise made available to, the consignee for the consignee's use in accordance with 10 CFR 20.1906(e) revised…