Connecticut Administrative Code

Regulations of Connecticut State AgenciesSec. 14-65-4. Auction dealers. Exclusion(a) Any person, firm or corporation conducting an auction who is not licensed as a motor vehicle dealer as provided in section 14-52 of the general statutes, or is not selling vehicles owned by a lic…

Regulations of Connecticut State AgenciesSec. 14-65-5. Auction sales of antique motor vehicles(a) Notwithstanding any provision of sections 14-65-1 to 14-65-4, inclusive, of the Regulations of Connecticut State Agencies, an auction sale to the public, of motor vehicles that are t…

Regulations of Connecticut State AgenciesSec. 14-65d-4. Statutory reference (Repealed) Repealed June 11, 2014.(Effective November 26, 1980; Repealed June 11, 2014)Notes: For 2014 repeal, see Sec. 54 of Public Act 14-187. (June 11, 2014)

Regulations of Connecticut State AgenciesSec. 14-65d-5. Form(a) The waiver of advance estimate form may be a separate document or may be incorporated in a work authorization form. (b) If separate, such form shall be not less than 4¼inches by 5 inches. The heading shall be bold fa…

Regulations of Connecticut State AgenciesSec. 14-65d-1-14-65d-3. Correlated TableFormer Section NumberNew Section Number14-65d-114-65j-114-65d-214-65j-214-65d-314-65j-3

Regulations of Connecticut State AgenciesSec. 14-65j-1. Statutory referencesUnder the provisions of section 14-65j of the Connecticut General Statutes each motor vehicle repair shop is required to display two signs. These signs shall conform to the standards set forth in sections…

Regulations of Connecticut State AgenciesSec. 14-65j-2. Consumer rights sign(a) This sign shall be 24 inches by 36 inches and shall be displayed in each area of the premises where work orders are placed by customers. (b) The type face used in the areas indicated shall be as follo…

Regulations of Connecticut State AgenciesSec. 14-65j-3. Charges and conditions sign(a) This sign shall not be less than 17 inches by 24 inches and be displayed in each area of the premises where work orders are placed by customers. The sign shall state: (1) The hourly charge for …

Regulations of Connecticut State AgenciesSec. 14-66-1. Display identificationEach wrecker registered pursuant to section 14-66 of the general statutes shall display the name and address or the name and telephone number of the licensee on the two front doors in letters and numeral…

Regulations of Connecticut State AgenciesSec. 14-67a-1. Procedure governedThese rules govern the requirements established by the commissioner of motor vehicles relating to the fitness of an applicant to engage in business as a manufacturer of motor vehicles for sale in this state…

Regulations of Connecticut State AgenciesSec. 14-67a-2. DefinitionAs used in these rules, except as otherwise required by the context:(a) \"Commissioner\" means \"Commissioner\" as defined in subsection (8) of section 14-1 of the Connecticut general statutes. (b) \"Manufacturer\"…

Regulations of Connecticut State AgenciesSec. 14-67a-3. Applicant's written statementAn applicant for a motor vehicle manufacturer's license to engage in the business of manufacturing motor vehicles for sale in this state shall assure the commissioner in writing that a supply of …

Regulations of Connecticut State AgenciesSec. 14-67a-4. Application for manufacturer's license(a) In addition to any other notice requirements contained in chapter 739 of the general statutes, a manufacturer as defined in section 14-1 of the general statutes, upon making applicat…

Regulations of Connecticut State AgenciesSec. 14-67d-1. ApplicationAny manufacturer licensed under the provisions of section 14-67a of the General Statutes may make application to the commissioner of motor vehicles for a general distinguishing registration number or numbers. (Eff…

Regulations of Connecticut State AgenciesSec. 14-67d-2. Financial responsibilityEach application for a manufacturer's general distinguishing number shall be accompanied by a certificate of financial responsibility in accord with section 14-112 of the general statutes. (Effective …

Regulations of Connecticut State AgenciesSec. 14-67d-3. (Repealed) Repealed January 21, 1986.

Regulations of Connecticut State AgenciesSec. 14-67d-4. Display of registration platesNo manufacturer shall display or allow any general distinguishing registration plates issued to him to be displayed on any motor vehicle other than a motor vehicle owned by such manufacturer or …

Regulations of Connecticut State AgenciesSec. 14-67d-5. Use of motor vehicle displaying general distinguishing numbersA licensed manufacturer or \"bona fide full-time employee\" of such licensed manufacturer may operate a motor vehicle displaying such general distinguishing regis…

Regulations of Connecticut State AgenciesSec. 14-67d-6. RecordsEach manufacturer to whom general distinguishing registration plates have been issued shall maintain a record as to the motor vehicle on which each plate is displayed and the location of all such general distinguishin…

Regulations of Connecticut State AgenciesSec. 14-67d-7. Supplemental identificationEach motor vehicle displaying a general distinguishing registration plate shall be operated by a person who has in his or her possession a supplemental identification document issued by the manufac…

Regulations of Connecticut State AgenciesSec. 14-67j-1. (Repealed) Repealed February 18, 1983.

Regulations of Connecticut State AgenciesSec. 14-67j-10. Miscellaneous provisions. Scrap metal processor (Repealed) Repealed June 27, 2013.(Effective January 7, 1992; Repealed June 27, 2013)

Regulations of Connecticut State AgenciesSec. 14-67j-2. Copy of record (Repealed) Repealed June 27, 2013.(Effective March 22, 1984; Repealed June 27, 2013)

Regulations of Connecticut State AgenciesSec. 14-67j-3. Definitions (Repealed) Repealed June 27, 2013.(Effective January 7, 1992; Repealed June 27, 2013)

Regulations of Connecticut State AgenciesSec. 14-67j-4. Requirements for obtaining license (Repealed) Repealed June 27, 2013.(Effective January 7, 1992; Repealed June 27, 2013)

Regulations of Connecticut State AgenciesSec. 14-67j-5. Procedures (Repealed) Repealed June 27, 2013.(Effective January 7, 1992; Repealed June 27, 2013)

Regulations of Connecticut State AgenciesSec. 14-67j-6. Fee for license (Repealed) Repealed June 27, 2013.(Effective January 7, 1992; Repealed June 27, 2013)

Regulations of Connecticut State AgenciesSec. 14-67j-7. Renewal of licenses (Repealed) Repealed June 27, 2013.(Effective January 7, 1992; Repealed June 27, 2013)

Regulations of Connecticut State AgenciesSec. 14-67j-8. Display of license by intermediate processors (Repealed) Repealed June 27, 2013.(Effective August 19, 1994; Repealed June 27, 2013)

Regulations of Connecticut State AgenciesSec. 14-67j-9. Display of license number by processed vehicle hauler (Repealed) Repealed June 27, 2013.(Effective January 7, 1992; Repealed June 27, 2013)

Regulations of Connecticut State AgenciesSec. 14-67l-1. Supplemental identification documentEach motor vehicle displaying a general distinguishing number plate pursuant to Section 14-67n of the General Statutes shall be operated by a person who has in his or her possession a supp…

Regulations of Connecticut State AgenciesSec. 14-67q-1. Defined. RequirementsA \"motor vehicle recycler\" is any person, firm or corporation engaged in the business of purchasing motor vehicles for the purpose of dismantling the vehicles for parts or use of the metal for scrap. S…

Regulations of Connecticut State AgenciesSec. 14-67q-l0. Stacking of other motor vehiclesStacking of motor vehicles, other than processed motor vehicles, at a height greater than two vehicles is prohibited. (Effective June 29, 1984; Amended January 16, 2014)

Regulations of Connecticut State AgenciesSec. 14-67q-11. Stacking of processed vehicles in processing areaThe stacking of processed motor vehicles in the area reserved for such processing is permitted, provided the perimeter of the base of each such stack or pile shall be set bac…

Regulations of Connecticut State AgenciesSec. 14-67q-12. Removal of parts. Restraint of dogs (Repealed) Repealed January 16, 2014.(Effective June 29, 1984; Repealed January 16, 2014)

Regulations of Connecticut State AgenciesSec. 14-67q-13. Removal and return of registration platesAll registration plates displayed on, or contained in, any motor vehicle purchased by a motor vehicle recycler shall immediately be removed from such vehicle and returned to the moto…

Regulations of Connecticut State AgenciesSec. 14-67q-14. Fence requirementFences required by section 14-67r of the Connecticut General Statutes shall be made of solid wood, metal, or opaque plastic of sufficient thickness and durability to remain in position under normal windload…

Regulations of Connecticut State AgenciesSec. 14-67q-15. Application requirements(a) Each applicant for a Connecticut motor vehicle recycler’s license shall file with the Department of Motor Vehicles, Dealers and Repairer's Division: (1) An application on a form provided by the D…

Regulations of Connecticut State AgenciesSec. 14-67q-16. Site drawing specificationsA site drawing must meet the following specifications:(1) Every site drawing of the proposed property location shall be scaled, and the maximum permissible scale is 1\" = 40' (one inch equals fort…

Regulations of Connecticut State AgenciesSec. 14-67q-17. Changes in site(a) The licensee shall notify the Department of Motor Vehicles, Dealers and Repairers Division, and obtain its approval prior to any changes in the use of the location site, or any part of the location site, …

Regulations of Connecticut State AgenciesSec. 14-67q-18. Parts not for resaleThe words “establishment”, “operation” or “maintenance” of a motor vehicle recycler’s yard or business shall include the accumulation of motor vehicle parts or old iron, metal, glass, paper, cordage or o…

Regulations of Connecticut State AgenciesSec. 14-67q-2. (Repealed) Repealed July 19, 1990.

Regulations of Connecticut State AgenciesSec. 14-67q-3. Definitions(1) \"Salvage motor vehicle\" means a motor vehicle purchased or obtained by a motor vehicle recycler for the value of parts contained on such vehicle, and stored in the motor vehicle recycler’s yard reserved for …

Regulations of Connecticut State AgenciesSec. 14-67q-4. Area required for storage of salvage motor vehiclesEach licensed motor vehicle recycler shall maintain a separate and distinct area for the storage of salvage motor vehicles, and such area shall in no case exceed eighty per …

Regulations of Connecticut State AgenciesSec. 14-67q-5. Transfer from salvage area to processing sectionAny vehicle purchased for salvage and stored in the portion of the yard reserved for salvage vehicles shall be removed from such area and stored or deposited in the processing …

Regulations of Connecticut State AgenciesSec. 14-67q-6. Location of stored vehiclesEach salvage or scrap motor vehicle stored or deposited within a motor vehicle recycler’s yard shall be so located as to be within one hundred feet of an accessible roadway or driveway with a minim…

Regulations of Connecticut State AgenciesSec. 14-67q-7. Proximity to other vehiclesWith the exception of a motor vehicle placed or stored on top of another, no scrap or salvage motor vehicle shall be located closer than one foot to an adjacent vehicle, provided when scrap or salv…

Regulations of Connecticut State AgenciesSec. 14-67q-8. Location of vehicles purchased for scrapEach motor vehicle purchased or obtained for scrap shall be deposited or stored in the portion of the yard reserved for the processing of vehicles. (Effective June 29, 1984; Amended Ja…

Regulations of Connecticut State AgenciesSec. 14-67q-9. Stacking of processed vehiclesThe stacking of processed motor vehicles in a motor vehicle recycler’s yard is prohibited except in the area reserved for such processing. (Effective June 29, 1984; Amended January 16, 2014)

Regulations of Connecticut State AgenciesSec. 14-78-1—14-78-19. (Repealed) Repealed February 24, 1997.