Connecticut Administrative Code

Regulations of Connecticut State AgenciesSec. 19-399-9. Chairman to be board memberThe chairman shall be one of the board members. He shall have the privilege of discussing all matters before the board and of voting thereon. (Effective May 21, 1982) AUTHORITY: Conn. Gen. Stat. § …

Regulations of Connecticut State AgenciesSec. 19-4-1. Minimum standardsSection 19a-36-A33 provides that a registered laboratory may be given a certificate of approval for making certain specified public health laboratory examinations, determinations or tests in a manner conformin…

Regulations of Connecticut State AgenciesSec. 19-403b-1—19-403b-4. (Repealed) Repealed March 26, 1991. AUTHORITY: Conn. Gen. Stat. § 19-403b

Regulations of Connecticut State AgenciesSec. 19-403b-5—19-403b-11. (Repealed) Repealed March 26, 1991. AUTHORITY: Conn. Gen. Stat. § 19-403b

Regulations of Connecticut State AgenciesSec. 19-409d-51. PurposeTo prescribe the Connecticut Department of Transportation regulations relating to the transport of large quantities of radioactive material or any quantity of radioactive waste, produced as a part of the nuclear fue…

Regulations of Connecticut State AgenciesSec. 19-409d-52. ApplicabilityThe provisions of these regulations pertain to any person transporting or causing the transportation of, by motor vehicle, certain specified radioactive material referred to in Section 19-409d of the General S…

Regulations of Connecticut State AgenciesSec. 19-409d-53. DefinitionsApplication — Any written or verbal request to the Commissioner for a permit. Carrier — See motor carrier. Commissioner — Means the Commissioner of the Department of Transportation appointed pursuant to title 13…

Regulations of Connecticut State AgenciesSec. 19-409d-54. Application for permit to transport radioactive materialNo person shall transport radioactive material over Connecticut highways until a permit has been issued by the Commissioner of Transportation. All applications for a …

Regulations of Connecticut State AgenciesSec. 19-409d-55. Conditions of a permitIn the interest of public health and safety, the following requirements are to be considered a condition of the permit. 1. All routes will be determined by the Connecticut department of transportation…

Regulations of Connecticut State AgenciesSec. 19-409d-56. PermitteeAny permittee who fails to comply with the provisions of any permit to transport radioactive material shall be deemed to have no permit and is subject to the penalties cited in Section 19-409d of the General Statu…

Regulations of Connecticut State AgenciesSec. 19-409d-57. Other regulatory controlNothing herein shall be construed to be in conflict with any federal regulations concerning the transport of hazardous material. (Effective August 25, 1977) AUTHORITY: Conn. Gen. Stat. § 19-409d

Regulations of Connecticut State AgenciesSec. 19-410-A1—19-410-A57. Transferred Transferred, February 25, 1988. AUTHORITY: Conn. Gen. Stat. § 19-410

Regulations of Connecticut State AgenciesSec. 19-410-B1—19-410-B89. Transferred, February 25, 1988.FormerSectionNewSection19-410-A129-192-A119-410-A229-192-A219-410-A329-192-A319-410-A429-192-A419-410-A529-192-A519-410-A629-192-A619-410-A729-192-A719-410-A829-192-A819-410-A929-19…

Regulations of Connecticut State AgenciesSec. 19-411-C1. DefinitionsAs used in this chapter \"department\" means the department of public safety; \"commissioner\" means the commissioner of public safety; \"vertical wheelchair lifts\" means a low rise special passenger elevator us…

Regulations of Connecticut State AgenciesSec. 19-411-C10. Capacity and rated load(a) The rated load shall not exceed four hundred fifty pounds (450#). The capacity shall be limited to one person; and one attendant if necessary. (b) Vertical wheelchair lifts shall not have a speed…

Regulations of Connecticut State AgenciesSec. 19-411-C11. Electrical wiring(a) Electrical requirements shall conform to the requirements of the National Fire Protection Association 70-1978. (b) Pipes in platform vicinity—pipes conveying steam, gas or liquids which if discharged i…

Regulations of Connecticut State AgenciesSec. 19-411-C12. Electrical wiring in the machinery space and hoistways(a) Method of installation of wiring in hoistways. Stationary electrical conductors located in hoistways shall be encased in rigid metal conduits or electrical metallic…

Regulations of Connecticut State AgenciesSec. 19-411-C13. Weatherproofing(a) All exterior electrical wiring shall be in rigid metal conduit or electrical metallic tubing and all electrical outlets, switches, and junction boxes and fittings shall be weatherproof. (b) Traveling cab…

Regulations of Connecticut State AgenciesSec. 19-411-C14. Machine framework and base(a) All machine frames shall be of metal construction and have a safety factor of not less than five (5) based on the rated load. Cast iron shall not be used. (b) The machine framework and base sh…

Regulations of Connecticut State AgenciesSec. 19-411-C15. Machinery beams and support(a) Securing of machine beams and type of supports. All machinery and sheaves shall be so supported and secured as to effectively prevent any part from becoming loose or displaced. Beams directly…

Regulations of Connecticut State AgenciesSec. 19-411-C16. Pits(a) A pit is not required at the lower terminal. The platform may stop on or at the bottom landing floor or a pit may be provided to permit the platform to stop flush with the landing floor. (Effective October 28, 1980…

Regulations of Connecticut State AgenciesSec. 19-411-C17. Guide rail and guide rail fastening(a) Material. Platform guide rails shall be of metal construction. Steel construction shall conform to the requirements of Rule 200.2a (American National Standard Institute A-17-1-78). Me…

Regulations of Connecticut State AgenciesSec. 19-411-C18. Car construction(a) Car frame and platform. The car frame shall be metal construction and have a safety factor of not less than five (5) based on a rated load. The platform shall be of metal or wood construction with a non…

Regulations of Connecticut State AgenciesSec. 19-411-C19. Platform safeties and governors(a) All devices shall be provided with a platform safety. The safety may be of the inertia type or operated by a speed governor, the safety may be of the type \"A\" design. If the platform is…

Regulations of Connecticut State AgenciesSec. 19-411-C2. General requirementsEach vertical wheelchair lift used or intended for use in the State of Connecticut shall be constructed, equipped, maintained and operated with respect to the supporting members; the platform or car, sha…

Regulations of Connecticut State AgenciesSec. 19-411-C20. Driving meansThe driving means may be a winding drum, chain drive, screw drive, rack and pinion drive, direct plunger, rope or lever action hydraulic. (Effective October 28, 1980) AUTHORITY: Conn. Gen. Stat. § 19-411

Regulations of Connecticut State AgenciesSec. 19-411-C21. Driving machines and sheaves(a) Materials and minimum drum diameters. Winding drums and overhead deflecting sheaves shall be of cast iron or steel, of a diameter not less than thirty (30) times the diameter of the hoisting…

Regulations of Connecticut State AgenciesSec. 19-411-C22. Terminal stopping devices(a) Stopping devices. Upper and lower terminal stopping devices operating by the car shall be provided and shall be set to stop the car at or near the upper and lower terminal landings. Upper and l…

Regulations of Connecticut State AgenciesSec. 19-411-C23. Hydraulic driving machinesHydraulic driving machines shall conform to the requirements of Section 302. (American National Standard Institute A-17-1-1978). Exception: Roped hydraulic machines may be used and the design need…

Regulations of Connecticut State AgenciesSec. 19-411-C24. Operating devices(a) Types of operation. Operation of the platform from the upper or lower landings and on the platform shall be controlled by a key. The key operated control shall be operated by a lock having five (5) pin…

Regulations of Connecticut State AgenciesSec. 19-411-C25. Suspension means(a) Types permitted. Suspension means shall be any one of the following: 1. Steel or iron elevator wire rope2. Steel aircraft cable3. Roller chain4. Direct plunger hydraulic5. Roped hydraulic6. Rack and pin…

Regulations of Connecticut State AgenciesSec. 19-411-C3. Approval of plansNo vertical wheelchair lifts shall be erected or installed and no vertical wheelchair lift shall be relocated or altered until detailed plans and specifications of the proposed construction or other work ha…

Regulations of Connecticut State AgenciesSec. 19-411-C4. Registration of vertical wheelchair liftsThe owner or operator of each vertical wheelchair lift shall register with the department each vertical wheelchair lift owned or operated by him, giving the type and capacity, a desc…

Regulations of Connecticut State AgenciesSec. 19-411-C5. Inspection by the departmentEach vertical wheelchair lift shall be thoroughly inspected by a department elevator inspector at least once each twelve months. (Effective October 28, 1980) AUTHORITY: Conn. Gen. Stat. § 19-411

Regulations of Connecticut State AgenciesSec. 19-411-C6. Issuance of operating certificateAs soon as the department of public safety approves any existing, new, relocated or altered vertical wheelchair lift as being fit for operation, it shall issue to the owner a certificate of …

Regulations of Connecticut State AgenciesSec. 19-411-C7. Discontinuance of operationIf any vertical wheelchair lift is found which, in the judgment of the department is dangerous to life and property or is being operated without the operating certificate the department may requir…

Regulations of Connecticut State AgenciesSec. 19-411-C8. InstallersAll vertical wheelchair lifts installed in the State of Connecticut shall be by licensed trades (elevator mechanics) (electricians). (Effective October 28, 1980) AUTHORITY: Conn. Gen. Stat. § 19-411

Regulations of Connecticut State AgenciesSec. 19-411-C9. Alternatives for installationVertical wheelchair lifts may be installed according to either Section 19-411-C9.01 or 19-411-C9.02. (Effective October 28, 1980) AUTHORITY: Conn. Gen. Stat. § 19-411

Regulations of Connecticut State AgenciesSec. 19-411-C9.01. (a) The hoistway shall be guarded by a solid enclosure extended from the lower landing to a height of at least forty-two (42) inches above the upper landing. The lift sides of the enclosure shall present a smooth surface…

Regulations of Connecticut State AgenciesSec. 19-411-C9.02. (a) The underside of the platform or car shall be guarded by a smooth toeguard on all accessible sides. The toeguard shall be braced to withstand the pressure at any point of one hundred twenty-five (125) pounds applied …

Regulations of Connecticut State AgenciesSec. 19-418c-1. (Repealed) Repealed December 14, 1984. AUTHORITY: Conn. Gen. Stat. § 19-418c

Regulations of Connecticut State AgenciesSec. 19-423-1—19-423-32. Transferred, July 27, 1984.Former SectionNew Section19-423-121a-235-119-423-221a-235-219-423-321a-235-319-423-421a-235-419-423-521a-235-519-423-621a-235-619-423-721a-235-719-423-821a-235-819-423-921a-235-919-423-10…

Regulations of Connecticut State AgenciesSec. 19-428-1. (Repealed) Repealed August 25, 1987. AUTHORITY: Conn. Gen. Stat. § 19-428

Regulations of Connecticut State AgenciesSec. 19-428-2—19-428-49. (Repealed) Repealed August 25, 1987. AUTHORITY: Conn. Gen. Stat. § 19-428

Regulations of Connecticut State AgenciesSec. 19-428-50—19-428-53. (Repealed) Repealed August 25, 1987. AUTHORITY: Conn. Gen. Stat. § 19-428

Regulations of Connecticut State AgenciesSec. 19-428-54—19-428-68. (Repealed) Repealed August 25, 1987. AUTHORITY: Conn. Gen. Stat. § 19-428

Regulations of Connecticut State AgenciesSec. 19-428-69—19-428-70. (Repealed) Repealed August 25, 1987. AUTHORITY: Conn. Gen. Stat. § 19-428