Connecticut Administrative Code

Regulations of Connecticut State AgenciesSec. 20-289-7. Seals Transferred to Sec 20-289-7a, January 3, 2018 (Effective April 22, 1988; Amended December 4, 1998; Amended June 18, 2015; Amended January 3, 2018; Transferred to § 20-289-7a, January 3, 2018) AUTHORITY: Conn. Gen. Stat…

Regulations of Connecticut State AgenciesSec. 20-289-7a. Seals(a) Each person granted a license shall use a seal, the design, arrangement, size and wording of which shall be prescribed by the board. (b) Each corporation granted a certificate of authorization for the practice of a…

Regulations of Connecticut State AgenciesSec. 20-289-8. Lapsed license Transferred to Sec 20-289-8a, January 3, 2018 (Effective April 22, 1988; Amended January 3, 2018; Transferred to § 20-289-8a, January 3, 2018) AUTHORITY: Conn. Gen. Stat. § 20-289 AUTHORITY: Conn. Gen. Stat. §…

Regulations of Connecticut State AgenciesSec. 20-289-8a. Lapsed license(a) A license is deemed lapsed if the holder thereof has failed to pay the renewal fee as prescribed by statute. The holder of a lapsed license shall not again practice architecture in this state until the lic…

Regulations of Connecticut State AgenciesSec. 20-289-9. Partnerships Transferred to Sec 20-289-9a, January 3, 2018 (Effective April 22, 1988; Amended January 3, 2018; Transferred to § 20-289-9a, January 3, 2018) AUTHORITY: Conn. Gen. Stat. § 20-289 AUTHORITY: Conn. Gen. Stat. § 2…

Regulations of Connecticut State AgenciesSec. 20-289-9a. Partnerships(a) No firm, company, partnership, association or corporation shall be registered as an architect except as provided in Section 20-290 of the Connecticut General Statutes. (b) A partnership may engage in the pra…

Regulations of Connecticut State AgenciesSec. 20-300-1. Definitions(a) \"Board\" means the state board of examiners for professional engineers and land surveyors as provided for in the general statutes. (b) \"Engineer-in-training\" means a person who has been granted a license as…

Regulations of Connecticut State AgenciesSec. 20-300-10. License seals and stamps(a) Each licensee, upon notification of licensure, will be authorized to obtain an official seal of a size and design prescribed by the Board. The seal shall be applied to all plans, maps, surveys, s…

Regulations of Connecticut State AgenciesSec. 20-300-10a. (Repealed) Repealed November 19, 1984. AUTHORITY: Conn. Gen. Stat. § 20-300 AUTHORITY: Conn. Gen. Stat. § 20-300

Regulations of Connecticut State AgenciesSec. 20-300-10b. Engineering and land surveying practices in property development work(a) The phase of property development work requiring evaluation, planning and design of drainage systems, proposed major changes in ground contours affec…

Regulations of Connecticut State AgenciesSec. 20-300-11. Renewals(a) All licenses expire on January thirty-first of the year following their issuance or renewal, except those first issued between November first and December thirty-first in the calendar year of first issuance, and…

Regulations of Connecticut State AgenciesSec. 20-300-12. Code of ethics(a) The Board adopts the following rules of professional conduct as the code of ethics for professional engineers and land surveyors. In order to establish and maintain a high standard of integrity, skills and…

Regulations of Connecticut State AgenciesSec. 20-300-13. (Repealed) Repealed October 19, 1965. AUTHORITY: Conn. Gen. Stat. § 20-300 AUTHORITY: Conn. Gen. Stat. § 20-300

Regulations of Connecticut State AgenciesSec. 20-300-14. (Repealed) Repealed November 19, 1984. AUTHORITY: Conn. Gen. Stat. § 20-300 AUTHORITY: Conn. Gen. Stat. § 20-300

Regulations of Connecticut State AgenciesSec. 20-300-14a. Complaints and adjudication proceduresThis board will be governed by the complaint and adjudication procedures of the Department of Consumer Protection as approved by the Commissioner of Consumer Protection, and published …

Regulations of Connecticut State AgenciesSec. 20-300-15. Layout Technician(a) An automatic fire sprinkler system layout technician’s license may be issued to any person who has received level III certification from the National Institute for Certification in Engineering Technolog…

Regulations of Connecticut State AgenciesSec. 20-300-2. Application for licensureThe application shall be made on forms prescribed and furnished by the department of consumer protection. Information supplied by the applicant on said form shall be typewritten except for signatures…

Regulations of Connecticut State AgenciesSec. 20-300-3. Classes of applicantsEach applicant shall designate the classification in the following schedule of minimum requirements under which the application is to be considered. However, the board may, at its discretion, consider it…

Regulations of Connecticut State AgenciesSec. 20-300-3a. Valid period of engineer-in-training and surveyor-in-training licenseA license as an engineer-in-training or surveyor-in-training shall remain valid for a period of ten years from the date upon which the applicant's first s…

Regulations of Connecticut State AgenciesSec. 20-300-3b. License retention for non-practicing licensees(a) Any person currently licensed under the provisions of section 20-300-3 as a professional engineer, land surveyor or both, may renew his or her license at a reduced fee provi…

Regulations of Connecticut State AgenciesSec. 20-300-4. Table of feesA check or money order for the appropriate fee shown and made payable to the Treasurer, State of Connecticut, shall accompany the application or renewal request. Application fees are nonrefundable. For applicati…

Regulations of Connecticut State AgenciesSec. 20-300-5. Examinations and interviews(a) The semi-annual examinations ordinarily will be held in the spring and fall or at such other time as the board shall decide, at such time and place as the board shall announce thirty days in ad…

Regulations of Connecticut State AgenciesSec. 20-300-6. Engineer-in-training examination for students(a) Senior students in the last semester of an approved curriculum may apply for the engineer-in-training examination and shall be permitted to take the examination prior to gradu…

Regulations of Connecticut State AgenciesSec. 20-300-7. (Repealed) Repealed October 19, 1965. AUTHORITY: Conn. Gen. Stat. § 20-300 AUTHORITY: Conn. Gen. Stat. § 20-300

Regulations of Connecticut State AgenciesSec. 20-300-7a. References(a) Each application shall contain the following signatures: (1) On applications for professional engineer: At least five persons, of whom at least four shall be members of the profession and not related to the ap…

Regulations of Connecticut State AgenciesSec. 20-300-8. Denial of licensureA person whose application has been denied shall be so notified. The board shall, upon request of the applicant, advise the applicant as to the reasons for such denial and the applicant may then submit add…

Regulations of Connecticut State AgenciesSec. 20-300-9. Wall certificate of licensure and license card(a) The board will issue to each successful applicant a wall certificate of licensure and a wallet card certifying that the applicant holds a license as a professional engineer o…

Regulations of Connecticut State AgenciesSec. 20-300b-1. GeneralThere are many types of surveys. Choice of a survey type is made relative to the intent and purpose for which the survey is to be used. The survey type is intended to classify these criteria. When a map is prepared, …

Regulations of Connecticut State AgenciesSec. 20-300b-10. Geographic information system (GIS) land information system (LIS)(a) A Geographic Information System (GIS) is a complex spatial information system used to capture, store, analyze, display, manage, share, and present data l…

Regulations of Connecticut State AgenciesSec. 20-300b-11. Classes of accuracy(a) Conversion to and from the metric system shall use the U.S. Survey Foot, which is defined as one meter is equal to 39.37 inches. When converting meters to feet the conversion is exactly 3937 divided …

Regulations of Connecticut State AgenciesSec. 20-300b-12. Boundary monuments and reference markers(a) A Boundary Monument is an object found or set on a boundary line which preserves and identifies the location of the boundary line on the ground. (b) A Reference Marker is a perma…

Regulations of Connecticut State AgenciesSec. 20-300b-13. Location requirementsThe following standards shall apply to location requirements:(1) there shall be a minimum of three monuments, markers or a combination thereof;(2) each monument or marker found or set shall be adequate…

Regulations of Connecticut State AgenciesSec. 20-300b-14. Acceptable monuments and markersThe following shall be acceptable forms of Monuments and Markers:(1) disks or plugs, made of durable material set in ledge or concrete and marked with a hole or cross; (2) monuments 4″ (10cm…

Regulations of Connecticut State AgenciesSec. 20-300b-15. GeneralOn surveys where the surveyor expresses a property/boundary opinion, the surveyor assumes responsibility for appropriate research. An appropriate examination of the land records and other sources is one which, in th…

Regulations of Connecticut State AgenciesSec. 20-300b-16. Land records research(a) Land Records Research shall include, but not be limited to, the following: (1) an examination of the record descriptions of the property being surveyed;(2) an examination of the record descriptions…

Regulations of Connecticut State AgenciesSec. 20-300b-17. Additional research(a) In cases where the surveyor finds: 1) evidence of an unrecorded map; 2) vagueness or conflict of boundary location; or 3) physical evidence of easements not found of record, the surveyor shall pursue…

Regulations of Connecticut State AgenciesSec. 20-300b-18. Map drafting standardsThe following standards shall apply to all survey maps and plans:(1) the surveyor shall use map-making materials of a durable nature;(2) all lettering shall be legible when reproduced;(3) whenever mor…

Regulations of Connecticut State AgenciesSec. 20-300b-19. Field and office recordsThe field notes, original maps, research material and computations shall be retained as a permanent record. (Adopted effective June 21, 1996) AUTHORITY: Conn. Gen. Stat. § 20-300b AUTHORITY: Conn. G…

Regulations of Connecticut State AgenciesSec. 20-300b-2. Property/boundary and limited property/boundary surveys(a) Property/Boundary and Limited Property/Boundary Surveys require sufficient investigation, study, field measurement and evaluation of factors affecting boundaries, r…

Regulations of Connecticut State AgenciesSec. 20-300b-20. Signing and Sealing(a) The signature and embossed seal of the surveyor shall be placed in accordance with Section 20-300-10 of The Regulations of Connecticut State Agencies. (b) Maps and plans shall include the statement: …

Regulations of Connecticut State AgenciesSec. 20-300b-3. Control surveys(a) Horizontal Control SurveyA Horizontal Control Survey establishes and depicts points on a horizontal coordinate system, such as latitude and longitude and state, municipal, or arbitrary coordinates. The ho…

Regulations of Connecticut State AgenciesSec. 20-300b-4. Topographic survey(a) A Topographic Survey depicts the configuration (relief) of the earth’s surface and the location of natural and artificial objects thereon. The Topographic and Vertical Classes of Accuracy, as defined i…

Regulations of Connecticut State AgenciesSec. 20-300b-5. Right of way survey(a) A Right of Way Survey is a type of survey which maps the limits of existing or proposed highways or public utility transmission easements, including the mapping of parcels to be acquired for such purp…

Regulations of Connecticut State AgenciesSec. 20-300b-6. General location survey(a) A General Location Survey depicts a parcel of land and particular improvements based on record research and compilation of data supplemented by limited field measurements. The specific content is …

Regulations of Connecticut State AgenciesSec. 20-300b-7. Data accumulation plan(a) A Data Accumulation Plan depicts collected and correlated data of a particular type (or types) within a given area. Data Accumulation Plans may be depicted on a previously prepared map. The horizon…

Regulations of Connecticut State AgenciesSec. 20-300b-8. Compilation plan(a) A Compilation Plan is a plan based on land record research and other sources of information that depicts the approximate size and shape of a parcel of land. This plan is derived from records only and not…

Regulations of Connecticut State AgenciesSec. 20-300b-9. Construction stake-out servicesConstruction Stake-Out Services are types of surveys which control the horizontal or vertical positions of proposed improvements. No plan need be prepared; however, documentation with respect …