Part 211: DEFINITIONS AND GENERAL PROVISIONS

Section 211.2430 Fountain Solution "Fountain solution" means the solution used in certain methods of printing which is applied to the image plate to maintain hydrophilic properties of the non-image areas. (Source: Added at 17 Ill. Reg. 16504, effective September 27, 1993)

Section 211.245 Adhesion Promoter for Aerospace Applications "Adhesion promoter for aerospace applications" means a very thin coating applied to a substrate to promote wetting and form a chemical bond with the subsequently applied material. (Source: Added at 45 Ill. Reg. 3509, ef…

Section 211.2450 Freeboard Height "Freeboard height" means, for open top vapor degreasers, the distance from the top of the vapor zone to the top of the degreaser tank, and for cold cleaning degreasers, the distance from the solvent to the top of the degreaser tank. (Source: Adde…

Section 211.2470 Fuel Combustion Emission Unit or Fuel Combustion Emission Source "Fuel combustion emission unit" or "Fuel combustion emission source" means any furnace, boiler, or similar equipment used for the primary purpose of producing heat or power by indirect heat transfer…

Section 211.2480 Fuel Tank Adhesive for Aerospace Applications "Fuel tank adhesive for aerospace applications" means an adhesive used to bond components exposed to fuel. The adhesive must be compatible with fuel tank coatings. (Source: Added at 45 Ill. Reg. 3509, effective March …

Section 211.2485 Fuel Tank Coating for Aerospace Applications "Fuel tank coating for aerospace applications" means a coating applied to fuel tank components on an aerospace vehicle for the purpose of corrosion and/or bacterial growth inhibition and to assure sealant adhesion in e…

Section 211.2490 Fugitive Particulate Matter "Fugitive particulate matter" means any particulate matter emitted into the atmosphere other than through a stack, provided that nothing in this definition or in 35 Ill. Adm. Code 212, Subpart K shall exempt any emission unit from comp…

Section 211.250 Aeration "Aeration" means the practice of forcing air through bulk stored grain to maintain the condition of the grain. (Source: Added at 17 Ill. Reg. 16504, effective September 27, 1993)

Section 211.2510 Full Operating Flowrate "Full operating flowrate" means maximum operating capacity of the source, emission unit or process unit, as applicable. (Source: Added at 17 Ill. Reg. 16504, effective September 27, 1993)

Section 211.2525 Gasket/Gasket Sealing Material "Gasket/gasket sealing material" means, for purposes of 35 Ill. Adm. Code 218 and 219, a fluid applied to coat a gasket or replace and perform the same function as a gasket, including room temperature vulcanization seal material. (S…

Section 211.2530 Gas Service "Gas service" means that the equipment or component contains process fluid that is in the gaseous state at operating conditions. (Source: Added at 17 Ill. Reg. 16504, effective September 27, 1993)

Section 211.2550 Gas/Gas Method "Gas/gas method" means either of two methods for determining VOM capture efficiency which rely only on gas phase measurements. The first method requires construction of a temporary total enclosure (TTE) to ensure that all would-be fugitive emission…

Section 211.2570 Gasoline "Gasoline" means any petroleum distillate or petroleum distillate/alcohol blend having a Reid vapor pressure of 27.6 kPa or greater which is used as a fuel for internal combustion engines. (Source: Added at 17 Ill. Reg. 16504, effective September 27, 199…

Section 211.2590 Gasoline Dispensing Operation or Gasoline Dispensing Facility "Gasoline dispensing operation" or "Gasoline dispensing facility" means any site where gasoline is transferred from a stationary storage tank to a motor vehicle gasoline tank used to provide fuel to th…

Section 211.260 Aerosol Adhesive and Adhesive Primer "Aerosol adhesive and adhesive primer" means, for purposes of 35 Ill. Adm. Code 218 and 219, an adhesive or adhesive primer packaged as an aerosol product in which the spray mechanism is permanently housed in a non-refillable c…

Section 211.2610 Gel Coat "Gel coat" means a resin coating, either pigmented or clear, applied to the surface of a mold, that becomes an integral part of a polyester resin product, and that provides a cosmetic enhancement and improves resistance to degradation from exposure to th…

Section 211.2612 General Aviation "General aviation" means that segment of civil aviation that encompasses all facets of aviation except air carriers, commuters, and military. General aviation includes charter and corporate-executive transportation, instruction, rental, aerial ap…

Section 211.2613 General Aviation Rework Facility "General aviation rework facility" means any aerospace facility with the majority of its revenues resulting from the reconstruction, repair, maintenance, repainting, conversion, or alteration of general aviation aerospace vehicles…

Section 211.2615 General Work Surface "General Work Surface" means, for purposes of 35 Ill. Adm. Code 218.187 and 219.187, an area of a medical device or pharmaceutical manufacturing facility where solvent cleaning is performed on work surfaces, but for which cleaning specificati…

Section 211.2620 Generator "Generator" means a device that produces electricity. (Source: Added at 25 Ill. Reg. 108, effective December 26, 2000)

Section 211.2622 Glass Bonding Primer "Glass bonding primer" means, for purposes of 35 Ill. Adm. Code 218 and 219, a primer applied to windshield or other glass, or to body openings, to prepare the glass or body opening for the application of glass bonding adhesives or the instal…

Section 211.2625 Glass Melting Furnace "Glass melting furnace" means, for purposes of Part 217, a unit comprising a refractory vessel in which raw materials are charged and melted at high temperature to produce molten glass. (Source: Added at 33 Ill. Reg. 13326, effective August …

Section 211.2630 Gloss Reducers "Gloss reducers" means a low-gloss coating formulated to eliminate glare for safety purposes on interior surfaces of a vehicle, as specified in the U.S. Department of Transportation Motor Vehicle Safety Standards. (Source: Added at 19 Ill. Reg. 682…

Section 211.2650 Grain "Grain" means the whole kernel or seed of corn, wheat, oats, soybeans and any other cereal or oil seed plant and the normal fines, dust and foreign matter which results from harvesting, handling or conditioning. The grain shall be unaltered by grinding or p…

Section 211.2670 Grain-Drying Operation "Grain-drying operation" means any operation, excluding aeration, by which moisture is removed from grain and which typically uses forced ventilation with the addition of heat. (Source: Added at 17 Ill. Reg. 16504, effective September 27, 1…

Section 211.2690 Grain-Handling and Conditioning Operation "Grain-handling and conditioning operation" means a grain storage facility and its associate grain transfer, cleaning, drying, grinding and mixing operations. (Source: Added at 17 Ill. Reg. 16504, effective September 27, …

Section 211.270 Aerosol Can Filling Line "Aerosol can filling line" means an operation where a series of process steps are used to fill and seal aerosol cans. (Source: Added at 18 Ill. Reg. 1253, effective January 18, 1994)

Section 211.271 Aerosol Coating "Aerosol coating" means a hand-held, pressurized, nonrefillable container that expels an adhesive or a coating in a finely divided spray when a valve on the container is depressed. (Source: Added at 45 Ill. Reg. 3509, effective March 4, 2021)

Section 211.2710 Grain-Handling Operation "Grain-handling operation" means any operation where one or more of the following grain-related processes (other than grain-drying operation, portable grain-handling equipment, one-turn storage space, and excluding flour mills and feed mi…

Section 211.272 Aerospace Coating "Aerospace coating" means a material that is applied to the surface of an aerospace vehicle or component to form a decorative, protective, or functional solid film, or the solid film itself. (Source: Added at 45 Ill. Reg. 3509, effective March 4,…

Section 211.273 Aerospace Coating Operation "Aerospace coating operation" means using a spray booth, tank, or other enclosure or any area, such as a hangar, for applying a single type of aerospace coating at an aerospace facility. Using the same spray booth for applying another t…

Section 211.2730 Green-Tire Spraying "Green tire spraying" means the spraying of green tires, both inside and outside, with release compounds which help remove air from the tire during molding and prevent the tire from sticking to the mold after curing. (Source: Added at 17 Ill. …

Section 211.275 Aerospace Flexible Primer "Aerospace flexible primer" means a primer for aerospace use that meets flexibility requirements such as those needed for adhesive bond-primed fastener heads or on surfaces expected to contain fuel. The aerospace flexible coating is requi…

Section 211.2750 Green Tires "Green tires" means assembled tires before molding and curing have occurred. (Source: Added at 17 Ill. Reg. 16504, effective September 27, 1993)

Section 211.277 Aerospace Facility "Aerospace facility" means any facility that produces, reworks, or repairs any commercial, civil, or military aerospace vehicle or component. (Source: Added at 45 Ill. Reg. 3509, effective March 4, 2021)

Section 211.2770 Gross Heating Value "Gross heating value" means amount of heat produced when a unit quantity of fuel is burned to carbon dioxide and water vapor, and the water vapor condensed as described in ASTM D2015-66, D900-55, D1826-64 and D240-64 incorporated by reference …

Section 211.278 Aerospace Pretreatment Coating "Aerospace pretreatment coating" means an organic coating that contains at least 0.5 percent acids by weight and is applied directly to metal or composite surfaces to provide surface etching, corrosion resistance, adhesion, and ease …

Section 211.2790 Gross Vehicle Weight Rating "Gross vehicle weight rating" means the value specified by the manufacturer as the maximum design loaded weight of a single vehicle. (Source: Added at 17 Ill. Reg. 16504, effective September 27, 1993)

Section 211.2795 Hand-Wipe Cleaning Operation at Aerospace Facilities "Hand-wipe cleaning at aerospace facilities" means removing contaminants, such as dirt, grease, oil, and coatings, from an aerospace vehicle or component by physically rubbing it with a material such as a rag, …

Section 211.280 Aerospace Primer "Aerospace primer" means the first layer and any subsequent layers of identically formulated coating applied to the surface of an aerospace vehicle or component. Primers are typically used for corrosion prevention, protection from the environment,…

Section 211.2800 Hardwood Plywood "Hardwood Plywood" means plywood whose surface layer is a veneer of hardwood. (Source: Added at 35 Ill. Reg. 13451, effective July 27, 2011)

Section 211.2810 Heated Airless Spray "Heated airless spray" means an airless spray coating method in which the coating is heated just prior to application. (Source: Added at 17 Ill. Reg. 16504, effective September 27, 1993)

Section 211.2815 Heat Input "Heat input" means the product of the gross heating value of the fuel and the amount of fuel combusted in a combustion device. Heat input does not include the heat derived from preheated combustion air, recirculated flue gases, or exhaust from other so…

Section 211.2820 Heat Input Rate "Heat input rate" means the amount of heat input used by a combustion device, divided by its operating time (in hrs). (Source: Added at 25 Ill. Reg. 108, effective December 26, 2000)

Section 211.2825 Heat-Resistant Coating "Heat-resistant coating" means, for purposes of 35 Ill. Adm. Code 218 and 219, a coating that must withstand a temperature of at least 204oC (400oF) during normal use. (Source: Added at 34 Ill. Reg. 14119, effective September 14, 2010)

Section 211.2830 Heatset "Heatset" means a class of lithography or letterpress that requires a heated dryer to solidify the printing inks. (Source: Amended at 34 Ill. Reg. 9069, effective June 25, 2010)

Section 211.284 Aerospace Specialty Coating "Aerospace specialty coating" means a coating that, even though it meets the definition of a primer, topcoat, or self-priming topcoat, has additional performance criteria beyond those of primers, topcoats, and self-priming topcoats for …