Part 211: DEFINITIONS AND GENERAL PROVISIONS

Section 211.3925 Mold Seal Coating "Mold seal coating" means, for purposes of 35 Ill. Adm. Code 218 and 219, the initial coating applied to a new mold or a repaired mold to provide a smooth surface that, when coated with a mold release coating, prevents products from sticking to …

Section 211.3930 Monitor "Monitor" means to measure and record. (Source: Added at 17 Ill. Reg. 16504, effective September 27, 1993)

Section 211.3950 Monomer "Monomer" means a relatively low-molecular-weight organic compound that may combine with itself or other similar compounds by a cross-linking reaction to become a polymer. (Source: Added at 18 Ill. Reg. 1253, effective January 18, 1994)

Section 211.3960 Motor Vehicles "Motor vehicles" means automobiles, trucks, vans, motorcycles, or buses. (Source: Added at 19 Ill. Reg. 6823, effective May 9, 1995)

Section 211.3961 Motor Vehicle Adhesive "Motor vehicle adhesive" means, for purposes of 35 Ill. Adm. Code 218 and 219, an adhesive, including glass bonding adhesive, used at a facility that is not an automobile or light-duty truck assembly coating facility, applied for the purpos…

Section 211.3965 Motor Vehicle Refinishing "Motor vehicle refinishing" means any application of coatings to motor vehicles, mobile equipment, or their parts and components, which is subsequent to the original coating applied at an original equipment manufacturing plant. (Source: …

Section 211.3966 Motor Vehicle Weatherstrip Adhesive "Motor vehicle weatherstrip adhesive" means, for purposes of 35 Ill. Adm. Code 218 and 219, an adhesive, used at a facility that is not an automobile or light-duty truck assembly coating facility, applied to weatherstripping ma…

Section 211.3967 Mouth Waterproofing Sealant "Mouth waterproofing sealant" means, for purposes of 35 Ill. Adm. Code 218.204(q)(1) and 219.204(q)(1), a coating applied in the manufacture of ammunition to provide a waterproof barrier between a shellcase mouth and bullet. (Source: A…

Section 211.3968 Multi-Colored Coating "Multi-colored coating" means, for purposes of 35 Ill. Adm. Code 218 and 219, a coating that exhibits more than one color when applied, and which is packaged in a single container and applied in a single coat. (Source: Added at 34 Ill. Reg. …

Section 211.3969 Multi-Component Coating "Multi-component coating" means, for purposes of 35 Ill. Adm. Code 218 and 219, a coating requiring the addition of a separate reactive resin, commonly known as a catalyst or hardener, before application to form an acceptable dry film. (So…

Section 211.3970 Multiple Package Coating "Multiple package coating" means a coating made from more than one different ingredient which must be mixed prior to using and has a limited pot life due to the chemical reaction which occurs upon mixing. (Source: Added at 17 Ill. Reg. 16…

Section 211.3975 Multipurpose Construction Adhesive "Multipurpose construction adhesive" means, for purposes of 35 Ill. Adm. Code 218 and 219, any adhesive used in the installation or repair of various construction materials, including but not limited to drywall, subfloor, panel,…

Section 211.3980 Nameplate Capacity "Nameplate capacity" means the maximum electrical generating output (in MWe) that a generator can sustain over a specified period of time when not restricted by seasonal or other deratings as measured in accordance with the United States Depart…

Section 211.3985 Natural Finish Hardwood Plywood Panel "Natural Finish Hardwood Plywood Panel" means a panel whose original grain pattern is enhanced by essentially transparent finishes frequently supplemented by filters and toners. (Source: Added at 35 Ill. Reg. 13451, effective…

Section 211.3990 New Grain-Drying Operation (Repealed) (Source: Repealed at 20 Ill. Reg. 7590, effective May 22, 1996)

Section 211.4010 New Grain-Handling Operation (Repealed) (Source: Repealed at 20 Ill. Reg. 7590, effective May 22, 1996)

Section 211.4030 No Detectable Volatile Organic Material Emissions "No detectable volatile organic material emissions" means a discharge of volatile organic material into the atmosphere as indicated by an instrument reading of less than 500 ppm above background as determined in a…

Section 211.4050 Non-Contact Process Water Cooling Tower "Non-contact process water cooling tower" means a towerlike device in which water is cooled by contact with atmospheric air and evaporation, where such water has been or will be used for cooling of a process stream where VO…

Section 211.4052 Non-Convertible Coating "Non-convertible coating" means, for purposes of Section 211.1877, a coating that dries by solvent evaporation with no change in the chemical nature of the binder. The coating remains soluble in the original solvent after drying. (Source: …

Section 211.4055 Non-Flexible Coating "Non-flexible coating" means a paint without the ability to withstand dimensional changes. (Source: Added at 19 Ill. Reg. 6823, effective May 9, 1995)

Section 211.4065 Non-Heatset "Non-heatset" means a class of lithography or letterpress that does not require a heated dryer to solidify the printing inks. Ultraviolet-cured and electron beam-cured inks are considered non-heatset. (Source: Amended at 34 Ill. Reg. 9069, effective J…

Section 211.4066 Nonstructural Adhesive for Aerospace Applications "Nonstructural adhesive for aerospace applications" means an adhesive that bonds nonload bearing aerospace components in noncritical applications and is not covered in any other specialty adhesive categories liste…

Section 211.4067 NOx Trading Program For the purposes of 35 Ill. Adm. Code 217, Subparts U and W, the NOx Trading Program shall mean the requirements of 35 Ill. Adm. Code 217, Subparts U and W, and those provisions of the federal NOx Trading Program, 40 CFR 96, incorporated by re…

Section 211.4070 Offset "Offset" means, with respect to printing, use of a blanket cylinder to transfer ink from the plate cylinder to the surface to be printed. (Source: Added at 17 Ill. Reg. 16504, effective September 27, 1993)

Section 211.4080 One-Component Coating "One-component coating" means, for purposes of 35 Ill. Adm. Code 218 and 219, a coating that is ready for application as it comes out of its container to form an acceptable dry film. A thinner added to a coating to reduce the viscosity is no…

Section 211.4090 One Hundred Percent Acid "One hundred percent acid" means, with respect to sulfuric and nitric acids, acid with a specific gravity of 1.8205 at 30° C in the case of sulfuric acid and 1.4952 at 30° C in the case of nitric acid. (Source: Added at 17 Ill. Reg. 16504…

Section 211.410 Air Pollution Control Equipment "Air pollution control equipment" means any equipment or apparatus of a type intended to eliminate, prevent, reduce or control the emission of air contaminants to the atmosphere. (Board Note: The requirements to obtain permits for a…

Section 211.4110 One-Turn Storage Space "One-turn storage space" means that space used to store grain with a total annual through-put not in excess of the total bushel storage of that space. (Source: Added at 17 Ill. Reg. 16504, effective September 27, 1993)

Section 211.4130 Opacity "Opacity" means that fraction of light, expressed in percent, which when transmitted from a source through a smoke-obscured path, is prevented from reaching the observer or instrument receiver. (Source: Amended at 20 Ill. Reg. 7590, effective May 22, 1996…

Section 211.4150 Opaque Stains "Opaque stains" means all stains that are not semi-transparent stains. (Source: Added at 17 Ill. Reg. 16504, effective September 27, 1993)

Section 211.4170 Open Top Vapor Degreasing "Open top vapor degreasing" means the batch process of cleaning and removing soils from surfaces by condensing hot solvent vapor on the colder metal parts. (Source: Added at 17 Ill. Reg. 16504, effective September 27, 1993)

Section 211.4190 Open-Ended Valve "Open-ended valve" means any valve, except pressure relief devices, having one side of the valve in contact with process fluid and one side open to the atmosphere, either directly or through open piping. (Source: Added at 17 Ill. Reg. 16504, effe…

Section 211.4210 Operator of a Gasoline Dispensing Operation or Operator of a Gasoline Dispensing Facility "Operator of gasoline dispensing operation" or "Operator of a gasoline dispensing facility" means any person who is the lessee of or operates, controls or supervises a gasol…

Section 211.4215 Optical Antireflection Coating "Optical antireflection coating" means a coating with a low reflectance in the infrared and visible wavelength ranges that is used for antireflection on or near optical and laser hardware. (Source: Added at 45 Ill. Reg. 3509, effect…

Section 211.4220 Optical Coating "Optical coating" means, for purposes of 35 Ill. Adm. Code 218 and 219, a coating applied to an optical lens. (Source: Added at 34 Ill. Reg. 14119, effective September 14, 2010)

Section 211.4230 Organic Compound "Organic compound" means any compound of carbon, excluding carbon monoxide, carbon dioxide, carbonic acid, metallic carbides or carbonates, and ammonium carbonate. (Source: Added at 17 Ill. Reg. 16504, effective September 27, 1993)

Section 211.4250 Organic Material and Organic Materials a) "Organic materials" means, for the purposes of Section 9.4 of the Act, any chemical compound of carbon, including diluents and thinners which are liquids at standard conditions and which are used as dissolvers, viscosity …

Section 211.4260 Organic Solvent "Organic solvent" means a solvent that consists of organic mineral spirits, methyl ethyl ketone, ethanol, ether, toluene, or other organic materials other than soap, detergent, surfactants, lubricating oil, wax, vegetable oil, grease, glycerin, or…

Section 211.4270 Organic Vapor "Organic vapor" means the gaseous phase of an organic material or a mixture of organic materials present in the atmosphere. (Source: Added at 17 Ill. Reg. 16504, effective September 27, 1993)

Section 211.4280 Other Glass "Other glass" means, for purposes of Part 217, glass that is neither container glass, as that term is defined in Section 211.1435, nor flat glass, as that term is defined in Section 211.2357. (Source: Added at 33 Ill. Reg. 13326, effective August 31, …

Section 211.4285 Outdoor Floor Covering Installation Adhesive "Outdoor floor covering installation adhesive" means, for purposes of 35 Ill. Adm. Code 218 and 219, any adhesive intended by the manufacturer for use in the installation of floor covering that is not in an enclosure a…

Section 211.4290 Oven "Oven" means, with respect to a coating line or printing line, a chamber within which heat is used for one or more of the following purposes: dry, bake, cure,or polymerize a coating or ink. (Source: Added at 17 Ill. Reg. 16504, effective September 27, 1993)

Section 211.430 Air Suspension Coater/Dryer "Air suspension coater/dryer" means a pharmaceutical coating operation which consists of vertical chambers in which tablets or particles are placed, and a coating is applied and then dried while the tablets or particles are kept in a fl…

Section 211.4310 Overall Control "Overall control" means the product of the capture efficiency and the control device efficiency. (Source: Added at 17 Ill. Reg. 16504, effective September 27, 1993)

Section 211.4330 Overvarnish "Overvarnish" means a transparent coating applied directly over ink or coating. (Source: Added at 17 Ill. Reg. 16504, effective September 27, 1993)

Section 211.4350 Owner of a Gasoline Dispensing Operation or Owner of a Gasoline Dispensing Facility "Owner of a gasoline dispensing operation" or "Owner of a gasoline dispensing facility" means any person who has legal or equitable title to a stationary storage tank at a gasolin…

Section 211.4370 Owner or Operator "Owner or operator" means any person who owns, operates, leases, controls, or supervises a source, an emission unit or air pollution control equipment. (Source: Added at 17 Ill. Reg. 16504, effective September 27, 1993)