Part 211: DEFINITIONS AND GENERAL PROVISIONS

Section 211.1555 Corrosion Prevention System "Corrosion prevention system" means a coating system that provides corrosion protection by displacing water and penetrating mating surfaces, forming a protective barrier between the metal surface and moisture. Coatings containing oils …

Section 211.1560 Cove Base "Cove base" means, for purposes of Subparts JJ of 35 Ill. Adm. Code 218 and 219, a flooring trim unit, generally made of vinyl or rubber, having a concave radius on one edge and a convex radius on the opposite edge that is used in forming a junction bet…

Section 211.1565 Cove Base Installation Adhesive "Cove base installation adhesive" means, for purposes of 35 Ill. Adm. Code 218 and 219, any adhesive used for the installation of cove base or wall base on a wall or vertical surface at floor level. (Source: Added at 34 Ill. Reg. 1…

Section 211.1567 Critical Use and Line Sealer Maskant "Critical use and line sealer maskant" means a temporary coating, not covered under other maskant categories, used to protect selected areas of aerospace parts from: strong acid or alkaline solutions such as those used in anod…

Section 211.1570 Crude Oil "Crude oil" means a naturally occurring mixture which consists of hydrocarbons and sulfur, nitrogen, or oxygen derivatives of hydrocarbons and which is a liquid at standard conditions. (Source: Added at 17 Ill. Reg. 16504, effective September 27, 1993)

Section 211.1590 Crude Oil Gathering "Crude oil gathering" means the transportation of crude oil or condensate after custody transfer between a production site and a reception point. (Source: Added at 17 Ill. Reg. 16504, effective September 27, 1993)

Section 211.1610 Crushing "Crushing" means the fragmentation of non-metallic minerals by a machine such as a jaw, gyratory, cone, roll, rod, mill, hammermill, and impactor. (Source: Added at 17 Ill. Reg. 16504, effective September 27, 1993)

Section 211.1620 Cryogenic Flexible Primer "Cryogenic flexible primer" means a primer designed to provide corrosion resistance, flexibility, and adhesion of subsequent coating systems when exposed to loads up to and surpassing the yield point of the substrate at cryogenic tempera…

Section 211.1625 Cryoprotective Coating "Cryoprotective coating" means a coating that insulates cryogenic or subcooled surfaces to limit propellant boil-off, maintain structural integrity of metallic structures during ascent or re-entry, and prevent ice formation. (Source: Added …

Section 211.1630 Custody Transfer "Custody transfer" means the transfer of produced petroleum and/or condensate after processing and/or treating in the producing operations, from storage tanks or automatic transfer systems to pipelines or any other forms of transportation. (Sourc…

Section 211.1650 Cutback Asphalt "Cutback asphalt" means any asphalt which has been liquified by blending with petroleum solvents other than residual fuel oil and has not been emulsified with water. (Source: Added at 17 Ill. Reg. 16504, effective September 27, 1993)

Section 211.1655 Cyanoacrylate Adhesive "Cyanoacrylate adhesive" means, for purposes of 35 Ill. Adm. Code 218 and 219, any adhesive with a cyanoacrylate content of at least 95 percent by weight. (Source: Added at 34 Ill. Reg. 14119, effective September 14, 2010)

Section 211.1670 Daily-Weighted Average VOM Content "Daily-weighted average VOM content" means the average VOM content of two or more coatings as applied on a coating line during any day, taking into account the fraction of total coating volume that each coating represents, as ca…

Section 211.1690 Day "Day" means, for purposes of Part 218 or Part 219, the consecutive 24 hours beginning at 12:00 AM (midnight) local time or beginning at a fixed time consistent with the source's operating schedule, as provided below. A source may use a day beginning at a time…

Section 211.170 Acid Gases "Acid gases" means, for the purposes of Section 9.4 of the Environmental Protection Act (the Act) (Ill. Rev. Stat. 1991, ch. 111½, par. 1009.4) [415 ILCS 5/9.4], hydrogen chloride, hydrogen fluoride and hydrogen bromide, which exist as gases, liquid mis…

Section 211.1700 Deadener "Deadener" means, for purposes of 35 Ill. Adm. Code 218 and 219, a coating applied to selected vehicle surfaces primarily for the purpose of reducing the sound of road noise in the passenger compartment. (Source: Added at 34 Ill. Reg. 14119, effective Se…

Section 211.1710 Degreaser "Degreaser" means any equipment or system used in solvent cleaning. (Source: Added at 17 Ill. Reg. 16504, effective September 27, 1993)

Section 211.1730 Delivery Vessel "Delivery vessel" means any tank truck or trailer equipped with a storage tank that is used for the transport of gasoline to a stationary storage tank at a gasoline dispensing operation, bulk gasoline plant, or bulk gasoline terminal. (Source: Add…

Section 211.1735 Department of Defense Classified Coating "Department of Defense classified coating" means a coating that has been determined pursuant to federal Executive Order 13526, "Classified National Security Information", December 29, 2009, or any successor order to requir…

Section 211.1740 Diesel Engine "Diesel engine" means, for the purposes of 35 Ill. Adm. Code 217, Subpart Q, a compression ignited two- or four-stroke engine in which liquid fuel injected into the combustion chamber ignites when the air charge is compressed to a temperature suffic…

Section 211.1745 Digital Printing "Digital Printing" means, for purposes of 35 Ill. Adm. Code 218.187 and 219.187, the transfer of electronic files directly from a computer to an electronically driven output device that prints the image directly on the selected media (substrate).…

Section 211.1750 Dip Coating "Dip coating" means a method of applying coatings in which the part is submerged in a tank filled with the coating. (Source: Added at 17 Ill. Reg. 16504, effective September 27, 1993)

Section 211.1770 Distillate Fuel Oil "Distillate fuel oil" means fuel oils of grade No. 1 or 2 as specified in detailed requirements for fuel oil ASTM D-369-69 (1971) incorporated by reference in 35 Ill. Adm. Code 218.112 and 219.112. (Source: Added at 17 Ill. Reg. 16504, effecti…

Section 211.1780 Distillation Unit "Distillation unit" means a device or vessel in which one or more feed streams are separated into two or more exit streams, each exit stream having component concentrations different from those in the feed stream(s). Separation is achieved by a …

Section 211.1790 Drum "Drum" means any cylindrical shipping container of 13 to 110-gallon capacity. (Source: Added at 17 Ill. Reg. 16504, effective September 27, 1993)

Section 211.1810 Dry Cleaning Operation or Dry Cleaning Facility "Dry cleaning operation" or "Dry cleaning facility" means the cleaning of fabrics using an essentially nonaqueous solvent by means of one or more solvent washes, extraction of excess solvent by spinning and drying b…

Section 211.1820 Dry Lubricative Material for Aerospace Applications "Dry lubricative material for aerospace applications" means a coating consisting of lauric acid, cetyl alcohol, waxes, or other noncrosslinked or resin-bound materials that act as a dry lubricant. (Source: Added…

Section 211.1830 Dump-Pit Area "Dump-pit area" means any area where grain is received at a grain-handling or grain-drying operation. (Source: Added at 17 Ill. Reg. 16504, effective September 27, 1993)

Section 211.1850 Effective Grate Area "Effective grate area" means that area of a dump-pit grate through which air passes, or would pass, when aspirated. (Source: Added at 17 Ill. Reg. 16504, effective September 27, 1993)

Section 211.1870 Effluent Water Separator "Effluent water separator" means any tank, box, sump or other apparatus in which any organic material floating on or entrained or contained in water entering such tank, box, sump or other apparatus is physically separated and removed from…

Section 211.1872 Ejection Cartridge Sealant "Ejection cartridge sealant" means, for purposes of 35 Ill. Adm. Code 218.204(q) and 219.204(q), a sealant applied during the assembly of an ejection cartridge to provide a waterproof barrier between a shellcase and primer, and between …

Section 211.1875 Elastomeric Materials "Elastomeric materials" means topcoats and primers that are specifically formulated for application over flexible parts such as filler panels and elastomeric bumpers. (Source: Added at 19 Ill. Reg. 6823, effective May 9, 1995)

Section 211.1876 Electric Dissipating Coating "Electric dissipating coating" means, for purposes of 35 Ill. Adm. Code 218 and 219, a coating that rapidly dissipates a high-voltage electric charge. (Source: Added at 34 Ill. Reg. 14119, effective September 14, 2010)

Section 211.1877 Electric-Insulating Varnish "Electric-insulating varnish" means, for purposes of 35 Ill. Adm. Code 218 and 219, a non-convertible coating applied to electric motors, components of electric motors, or power transformers to provide electrical, mechanical, and envir…

Section 211.1878 Electrical Apparatus Component "Electrical Apparatus Component" means, for purposes of 35 Ill. Adm. Code 218.187 and 219.187, an internal component such as wires, windings, stators, rotors, magnets, contacts, relays, energizers, and connections in an apparatus th…

Section 211.1880 Electrical Switchgear Compartment Coatings "Electrical switchgear compartment coatings" means coatings applied to metal-enclosed compartments that house assemblies of medium/high voltage switchgear, of greater than 1,000 volts AC, for utility distribution in outd…

Section 211.1882 Electrodeposition Primer (EDP) "Electrodeposition primer" or "EDP" means, for purposes of 35 Ill. Adm. Code 218 and 219, a process of applying a protective, corrosion-resistant waterborne primer on exterior and interior surfaces that provides thorough coverage of…

Section 211.1883 Electromagnetic Interference/Radio Frequency Interference (EMI/RFI) Shielding Coatings "Electromagnetic interference/radio frequency interference coatings" or "EMI/RFI coatings" means: Prior to May 1, 2012, coatings used on business machine plastic housings to at…

Section 211.1885 Electronic Component "Electronic Component" means, for the purposes of 35 Ill. Adm. Code 218.182(f), 219.182(f), 218.187, and 219.187, all portions of an electronic assembly, including, but not limited to, circuit board assemblies, printed wire assemblies, printe…

Section 211.1890 Electrostatic Bell or Disc Spray "Electrostatic bell or disc spray" means an electrostatic spray coating method in which a rapidly-spinning bell- or disc-shaped applicator is used to create a fine mist and apply the coating with high transfer efficiency. (Source:…

Section 211.1895 Electrostatic Discharge and Electromagnetic Interference Coating "Electrostatic discharge and electromagnetic interference coating" means a coating applied to space vehicles, missiles, aircraft radomes, and helicopter blades to disperse static energy or reduce el…

Section 211.1900 Electrostatic Prep Coat "Electrostatic prep coat" means a coating that is applied to a plastic part solely to provide conductivity for the subsequent application of a prime coat, a topcoat, or other coating through the use of electrostatic application methods. An…

Section 211.1910 Electrostatic Spray "Electrostatic spray" means a spray coating method in which opposite electrical charges are applied to the substrate and the coating. The coating is attracted to the object due to the electrostatic potential between them. (Source: Added at 17 …

Section 211.1915 Elevated-Temperature Skydrol-Resistant Commercial Primer "Elevated-temperature Skydrol-resistant commercial primer" means a primer applied primarily to commercial aircraft (or commercial aircraft adapted for military use) that must withstand immersion in phosphat…

Section 211.1920 Emergency or Standby Unit "Emergency or Standby Unit" means, for a stationary gas turbine or a stationary reciprocating internal combustion engine, a unit that: a) Supplies power for the source at which it is located but operates only when the normal supply of po…

Section 211.1930 Emission Rate "Emission rate" means, if not otherwise stated in a specific provision, the total quantity of a particular specified air contaminant discharged into the atmosphere in any one-hour period. For example, if not otherwise specified in 35 Ill. Adm. Code …

Section 211.1950 Emission Unit "Emission unit" means any part or activity at a stationary source that emits or has the potential to emit any air pollutant. (Source: Added at 17 Ill. Reg. 16504, effective September 27, 1993)