Part 211: DEFINITIONS AND GENERAL PROVISIONS

Section 211.6425 Stripping "Stripping" means, for purposes of 35 Ill. Adm. Code 218.187 and 219.187, the removal of cured coatings, cured inks, or cured adhesives. (Source: Added at 39 Ill. Reg. 9069, effective June 25, 2010)

Section 211.6426 Structural Autoclavable Adhesive for Aerospace Applications "Structural autoclavable adhesive for aerospace applications" means an adhesive used to bond load-carrying aerospace components that is cured by heat and pressure in an autoclave. (Source: Added at 45 Il…

Section 211.6427 Structural Glazing "Structural glazing" means, for purposes of 35 Ill. Adm. Code 218 and 219, a process that includes the application of adhesive to bond glass, ceramic, metal, stone, or composite panels to exterior building frames. (Source: Added at 34 Ill. Reg.…

Section 211.6428 Structural Nonautoclavable Adhesive for Aerospace Applications "Structural nonautoclavable adhesive for aerospace applications" means an adhesive cured under ambient conditions that is used to bond load-carrying aerospace components or other critical functions, s…

Section 211.6430 Styrene Devolatilizer Unit "Styrene devolatilizer unit" means equipment performing the function of separating unreacted styrene monomer and other volatile components from polystyrene in a vacuum devolatilizer. (Source: Added at 17 Ill. Reg. 16504, effective Septe…

Section 211.6450 Styrene Recovery Unit "Styrene recovery unit" means equipment performing the function of separating styrene monomer from other less volatile components of the styrene devolatilizer unit's output. The separated styrene monomer may be reused as a raw material in th…

Section 211.6460 Subfloor "Subfloor" means, for purposes of 35 Ill. Adm. Code 218 and 219, subflooring material over floor joists, including any load bearing joists. Subflooring is covered by a finish surface material. (Source: Added at 34 Ill. Reg. 14119, effective September 14,…

Section 211.6470 Submerged Loading Pipe a) "Submerged loading pipe" means, for purposes of 35 Ill. Adm. Code 215, any loading pipe the discharge opening of which is entirely submerged when the liquid level is 6 inches above the bottom of the tank. When applied to a tank which is …

Section 211.6490 Substrate "Substrate" means the surface onto which a coating is applied or into which a coating is impregnated. (Source: Added at 17 Ill. Reg. 16504, effective September 27, 1993)

Section 211.650 Automobile or Light-Duty Truck Refinishing "Automobile or light-duty truck refinishing" means the repainting of used automobiles and light-duty trucks. (Source: Added at 17 Ill. Reg. 16504, effective September 27, 1993)

Section 211.6510 Sulfuric Acid Mist "Sulfuric acid mist" means sulfuric acid mist as measured according to the method specified in 35 Ill. Adm. Code 214.101(b). (Source: Added at 17 Ill. Reg. 16504, effective September 27, 1993)

Section 211.6530 Surface Condenser "Surface condenser" means a device which removes a substance from a gas stream by reducing the temperature of the stream, without direct contact between the coolant and the stream. (Source: Added at 17 Ill. Reg. 16504, effective September 27, 19…

Section 211.6535 Surface Preparation "Surface Preparation" means, for purposes of 35 Ill. Adm. Code 218.187 and 219.187, the removal of contaminants such as dust, soil, oil, and grease prior to coating, adhesive, or ink applications. (Source: Added at 34 Ill. Reg. 9069, effective…

Section 211.6540 Surface Preparation Materials "Surface preparation materials" means materials that are used to remove foreign matter, such as wax, tar, grease, and silicone, from the surface to be coated. (Source: Added at 19 Ill. Reg. 6823, effective May 9, 1995)

Section 211.6550 Synthetic Organic Chemical or Polymer Manufacturing Plant "Synthetic organic chemical or polymer manufacturing plant" means a source that produces, as intermediates or final products, chemicals or polymers. (Source: Added at 17 Ill. Reg. 16504, effective Septembe…

Section 211.6570 Tablet Coating Operation "Tablet coating operation" means a pharmaceutical coating operation in which tablets are coated. (Source: Added at 17 Ill. Reg. 16504, effective September 27, 1993)

Section 211.6575 Temporary Protective Coating for Aerospace Applications "Temporary protective coating for aerospace applications" means a coating applied to aerospace surfaces to provide scratch or corrosion protection during manufacturing, storage, or transportation. Two types …

Section 211.6580 Texture Coat "Texture coat" means a coating applied to a plastic part which, in its finished form, consists of discrete raised spots of the coating. (Source: Added at 19 Ill. Reg. 6823, effective May 9, 1995)

Section 211.6583 Thermal Control Coating for Aerospace Applications "Thermal control coating for aerospace applications" means a coating formulated with specific thermal conductive or radiative properties to permit temperature control of the aerospace substrate. (Source: Added at…

Section 211.6585 Thin Metal Laminating Adhesive "Thin metal laminating adhesive" means, for purposes of 35 Ill. Adm. Code 218 and 219, any adhesive intended by the manufacturer for use in bonding multiple layers of metal to metal or metal to plastic in the production of electroni…

Section 211.6587 Thin Particleboard "Thin Particleboard" is a manufactured board ¼ inch or less in thickness made of individual wood particles that have been coated with a binder and formed into flat sheets by pressure. (Source: Added at 35 Ill. Reg. 13451, effective July 27, 201…

Section 211.6590 Thirty Day Rolling Average "Thirty day rolling average" means any value arithmetically averaged over any consecutive thirty days. (Source: Added at 17 Ill. Reg. 16504, effective September 27, 1993)

Section 211.660 Automotive/Transportation Plastic Parts "Automotive/transportation plastic parts" means the interior and exterior plastic components of automobiles, trucks, tractors, lawnmowers, and other like mobile equipment intended for primary use on land, with the exception …

Section 211.6610 Three-Piece Can "Three-piece can" means a can which is made from a rectangular sheet and two circular ends. (Source: Added at 17 Ill. Reg. 16504, effective September 27, 1993)

Section 211.6620 Three or Four Stage Coating System "Three or four stage coating system" means a topcoat system composed of a colored basecoat, one or two semi-transparent midcoats, and a transparent clearcoat. (Source: Added at 19 Ill. Reg. 6823, effective May 9, 1995)

Section 211.6630 Through-the-Valve Fill "Through-the-value fill" means, with respect to filling of aerosol cans with propellant, a method of filling cans by injecting propellant into the can through and around the outlet tube of the can and aerosol valve. Through-the-valve fill i…

Section 211.6635 Tileboard "Tileboard" means paneling that has a colored waterproof surface coating. (Source: Added at 35 Ill. Reg. 13451, effective July 27, 2011)

Section 211.6640 Tire Repair "Tire repair" means, for purposes of 35 Ill. Adm. Code 218 and 219, a process that includes expanding a hole, tear, fissure, or blemish in a tire casing by grinding or gouging, applying adhesive, and filling the hole or crevice with rubber. (Source: A…

Section 211.665 Auxiliary Boiler "Auxiliary boiler" means, for purposes of Part 217, a boiler that is operated only when the main boiler or boilers at a source are not in service and is used either to maintain building heat or to assist in the startup of the main boiler or boiler…

Section 211.6650 Tooling Resin "Tooling resin" means resins used to fabricate molds and fixtures used in manufacturing of fiberglass products. (Source: Added at 18 Ill. Reg. 1253, effective January 18, 1994)

Section 211.6670 Topcoat "Topcoat" means: Except as used in 35 Ill. Adm. Code 218.204(a)(2) and (q)(5) and 219.204(a)(2), (q)(5), and (r), a coating applied to a substrate in a multiple coat operation other than prime coat, primer surfacer coat or final repair coat; For purposes …

Section 211.6685 Topcoat for General Aviation Rework Facility "Topcoat for general aviation rework facility" means a topcoat applied at a general aviation rework facility. (Source: Added at 45 Ill. Reg. 3509, effective March 4, 2021)

Section 211.6690 Topcoat Operation "Topcoat operation" means the application areas, flash-off areas, and ovens used to apply and dry or cure the topcoat (except final off-line repair) on automobile or light-duty truck bodies or body parts on a single assembly line. A topcoat oper…

Section 211.6695 Topcoat System "Topcoat system" means the final film or series of films of coating applied to a motor vehicle refinishing surface, and includes basecoat/clearcoat systems and three or four stage coating systems. (Source: Added at 19 Ill. Reg. 6823, effective May …

Section 211.670 Baked Coatings "Baked coatings" means any coating which is cured or dried in an oven where the oven air temperature exceeds 90ºC (194ºF), or any coating which is cured in any manner that does not otherwise fit into the definition of "air dried coatings," as define…

Section 211.6710 Touch-Up "Touch-up" means, with respect to polyester resin product manufacturing processes, a portion of the fabrication process that is necessary to cover minor imperfections. (Source: Added at 18 Ill. Reg. 1253, effective January 18, 1994)

Section 211.6720 Touch-Up Coating "Touch-up coating" means: a) Except as used in 35 Ill. Adm. Code 218.204(q), 219.204(q), and 219.204(r), a coating applied by brush or hand held, non-refillable aerosol cans to repair minor surface damage and imperfections; b) For purposes of 35 …

Section 211.6730 Transfer Efficiency "Transfer efficiency" means the ratio of the amount of coating solids deposited onto a part or product to the total amount of coating solids used, during a particular time period. (Source: Added at 17 Ill. Reg. 16504, effective September 27, 1…

Section 211.6740 Translucent Coating "Translucent coating" means, for purposes of 35 Ill. Adm. Code 218 and 219, a coating that contains binders and pigment, and is formulated to form a colored, but not opaque, film. (Source: Added at 34 Ill. Reg. 14119, effective September 14, 2…

Section 211.6750 Tread End Cementing "Tread end cementing" means the application of a solvent-based cement to the tire tread ends. (Source: Added at 17 Ill. Reg. 16504, effective September 27, 1993)

Section 211.6770 True Vapor Pressure "True vapor pressure" means the equilibrium partial pressure exerted by a volatile organic liquid as determined in accordance with methods described in American Petroleum Institute Bulletin 2517, "Evaporation Loss From Floating Roof Tanks," se…

Section 211.6780 Trunk Interior Coating "Trunk interior coating" means, for purposes of 35 Ill. Adm. Code 218 and 219, a coating outside of the primer surfacer and topcoat operations applied to the trunk interior to provide chip protection. (Source: Added at 34 Ill. Reg. 14119, e…

Section 211.6790 Turnaround "Turnaround" means, with respect to a refinery process unit, the procedure of shutting down an operating refinery unit, emptying gaseous and liquid contents to do inspection, maintenance and repair work and putting the unit back into production. (Sourc…

Section 211.680 Bakery Oven "Bakery oven" means an oven used at any time for the purpose of baking yeast-leavened products, including, but not limited to, breads, rolls and buns. (Source: Added at 19 Ill. Reg. 6823, effective May 9, 1995)

Section 211.6810 Two-Piece Can "Two-piece can" means a can that consists of a body manufactured, i.e., drawn, from a single piece of metal and one top or end. (Source: Added at 17 Ill. Reg. 16504, effective September 27, 1993)

Section 211.6825 Underbody Coating "Underbody coating" means, for purposes of 35 Ill. Adm. Code 218 and 219, a coating applied to the undercarriage or firewall to prevent corrosion and/or provide chip protection. (Source: Added at 34 Ill. Reg. 14119, effective September 14, 2010)

Section 211.6830 Under-the-Cup Fill "Under-the-cup fill" means, with respect to filling of aerosol cans with propellant, a method of filling cans whereby the propellant is introduced through the junction between the annular top of the can and the metal cup which holds the outlet …