Part 219: ORGANIC MATERIAL EMISSION STANDARDS AND LIMITATIONS FOR THE METRO EAST AREA

Section 219.612 Compliance Dates (Repealed) (Source: Repealed at 17 Ill. Reg. 16918, effective September 27, 1993)

Section 219.613 Compliance Plan (Repealed) (Source: Repealed at 17 Ill. Reg. 16918, effective September 27, 1993) SUBPART AA: PAINT AND INK MANUFACTURING

Section 219.620 Applicability a) This Subpart shall apply to all paint and ink manufacturing sources which: 1) Include process emission units not subject to Subparts B, E, F (excluding Section 219.204(l) of this Part), H (excluding Section 219.405 of this Part), Q, R, S, T (exclu…

Section 219.621 Exemption for Waterbase Material and Heatset-Offset Ink The requirements of Sections 219.624 and 219.625 and Section 219.628(a) of this Part shall not apply to equipment while it is being used to produce either: a) Paint or ink formulations which contain 10 percen…

Section 219.623 Permit Conditions No person shall violate any condition in a permit when the condition results in exclusion of the source or an emission unit from this Subpart. (Source: Amended at 17 Ill. Reg. 16918, effective September 27, 1993)

Section 219.624 Open-Top Mills, Tanks, Vats or Vessels No person shall operate an open-top mill, tank, vat or vessel with a volume of more than 45 1 (12 gal) for the production of paint or ink unless: a) The mill, tank, vat or vessel is equipped with a cover which completely cove…

Section 219.625 Grinding Mills a) No person shall operate a grinding mill for the production of paint or ink which is not maintained in accordance with the manufacturer's specifications. b) No person shall operate a grinding mill fabricated or modified after the effective date of…

Section 219.626 Storage Tanks a) The owner or operator shall equip tanks storing VOL with a vapor pressure greater than 10 kPa (1.5 psi) at 20°C (68°F) with pressure/vacuum conservation vents set as a minimum at +/1 0.2 kPa (0.029 psi). These controls shall be operated at all tim…

Section 219.628 Leaks The owner or operator of a paint or ink manufacturing source shall, for the purpose of detecting leaks, conduct an equipment monitoring program as set forth below: a) Each pump shall be checked by visual inspection each calendar week for indications of leaks…

Section 219.630 Clean Up a) No person shall clean paint or ink manufacturing equipment with organic solvent unless the equipment being cleaned is completely covered or enclosed except for an opening no larger than necessary to allow safe clearance for proper operation of the clea…

Section 219.636 Compliance Schedule Every owner or operator of a source subject to the control requirements of this Subpart shall comply with the requirements thereof on and after a date consistent with Section 219.106 of this Part. (Source: Amended at 17 Ill. Reg. 16918, effecti…

Section 219.637 Recordkeeping and Reporting a) Upon request by the Agency, the owner or operator of a source which claims to be exempt from the requirements of this Subpart shall submit records to the Agency within 30 calendar days from the date of the request which document that…

Section 219.640 Applicability The provisions of this Subpart shall apply to polystyrene plants: a) Which use continuous processes to manufacture polystyrene – polybutadiene co-polymer; and b) Which fall within Standard Industrial Classification Group No. 282, Industry No. 2821, e…

Section 219.642 Emissions Limitation at Polystyrene Plants No person shall cause or allow the emissions of VOM from the material recovery section to exceed 0.12 kg of VOM per 1000 kg of polystyrene resin produced. (Source: Renumbered from Section 219.877 at 17 Ill. Reg. 16918, ef…

Section 219.644 Emissions Testing a) Upon a reasonable request by the Agency, the owner or operator of a polystyrene plant subject to this Subpart shall at his own expense demonstrate compliance by use of the following method: 40 CFR 60, Appendix A, Method 25 – Determination of T…

Section 219.720 Applicability (Repealed) (Source: Repealed at 20 Ill. Reg. 14462, effective October 17, 1996)

Section 219.722 Control Requirements (Repealed) (Source: Repealed at 20 Ill. Reg. 14462, effective October 28, 1996)

Section 219.726 Testing (Repealed) (Source: Repealed at 20 Ill. Reg. 14462, effective October 28, 1996)

Section 219.727 Monitoring (Repealed) (Source: Repealed at 20 Ill. Reg. 14462, effective October 28, 1996)

Section 219.728 Recordkeeping and Reporting (Repealed) (Source: Repealed at 20 Ill. Reg. 14462, effective October 28, 1996)

Section 219.729 Compliance Date (Repealed) (Source: Repealed at 20 Ill. Reg. 14462, effective October 28, 1996)

Section 219.730 Certification (Repealed) (Source: Repealed at 20 Ill. Reg. 14462, effective October 28, 1996) SUBPART GG: MARINE TERMINALS

Section 219.760 Applicability a) The requirements of this Subpart shall apply to sources that load or who are permitted to load gasoline or crude oil. b) The requirements of this Subpart shall not apply to the following activities: 1) Loading of liquids associated with the fuelin…

Section 219.762 Control Requirements a) Except as provided at subsection (c) of this Section, every owner or operator of a marine terminal subject to the requirements of this Subpart shall equip each terminal with a vapor collection and control system that: 1) Captures the vapors…

Section 219.764 Compliance Certification By May 1, 1996, or upon initial startup or upon change in method of compliance, the owner or operator of a source subject to the requirements of this Subpart must certify compliance with the requirements of this Subpart by submitting to th…

Section 219.766 Leaks The owner or operator of a marine terminal shall comply with the requirements of Section 219.445 of this Part with respect to all equipment associated with the vapor collection and control system required by Section 219.762(a) of this Subpart. (Source: Added…

Section 219.768 Testing and Monitoring a) Compliance with Section 219.762(a)(2) of this Subpart shall be determined by visual inspection and by the leak detection methods contained in Section 219.105(g) of this Part. b) If the control device used to comply with Section 219.762(a)…

Section 219.770 Recordkeeping and Reporting a) The owner or operator of sources complying with Sections 219.762(a) and (b), or (c)(1), or (c)(3) of this Subpart shall maintain records regarding the marine terminal, and each time a marine vessel is loaded during the regulatory con…

Section 219.780 Emission Limitations a) Except as provided in Section 219.782 of this Subpart, no owner or operator of a motor vehicle refinishing operation shall coat motor vehicles, mobile equipment, or their parts and components, unless all coatings, except touch-up coatings, …

Section 219.782 Alternative Control Requirements As an alternative to complying with the VOM content limitations in Section 219.780 of this Subpart, the owner or operator of a motor vehicle refinishing operation may operate control equipment that reduces VOM emissions at the sour…

Section 219.784 Equipment Specifications Every owner or operator of a motor vehicle refinishing operation, unless the source uses less than 20 gallons of coating per calendar year from all motor vehicle refinishing operations combined, shall: a) Coat motor vehicles, mobile equipm…

Section 219.786 Surface Preparation Materials Every owner or operator of a motor vehicle refinishing operation only shall use surface preparation materials that never exceed the following VOM content limitations for the specified substrate: /l (lbs/gal) a) Plastic parts 0.78 (6.5…

Section 219.787 Work Practices a) Every owner or operator of a motor vehicle refinishing operation shall ensure that fresh and spent solvent, cloth or paper used to apply solvents for surface preparation or cleanup, waste paint, and sludge are stored in closed containers. b) Ever…

Section 219.788 Testing a) Upon request by the Agency, the owner or operator of a motor vehicle refinishing operation shall, at its own expense, conduct tests to demonstrate compliance with Sections 219.780, 219.782 or 219.786 of this Subpart, in accordance with the applicable te…

Section 219.789 Monitoring and Recordkeeping for Control Devices a) Every owner or operator of a motor vehicle refinishing operation that complies with this Subpart pursuant to Section 219.782 of this Subpart shall: 1) Install and operate equipment to continuously monitor each co…

Section 219.790 General Recordkeeping and Reporting (Repealed) (Source: Repealed at 30 Ill. Reg. 9799, effective May 15, 2006)

Section 219.791 Compliance Date Every owner or operator of a motor vehicle refinishing operation shall comply with the requirements of this Subpart by March 15, 1996, upon modification or upon initial startup. (Source: Added at 19 Ill. Reg. 6958, effective May 9, 1995)

Section 219.792 Registration (Repealed) (Source: Repealed at 37 Ill. Reg. 1722, effective January 28, 2013)

Section 219.875 Applicability of Subpart BB (Renumbered) (Source: Renumbered to Section 219.640 at 17 Ill. Reg. 16918, effective September 27, 1993)

Section 219.877 Emissions Limitation at Polystyrene Plants (Renumbered) (Source: Renumbered to Section 219.642 at 17 Ill. Reg. 16918, effective September 27, 1993)

Section 219.879 Compliance Date (Repealed) (Source: Repealed at 17 Ill. Reg. 16918, effective September 27, 1993)

Section 219.881 Compliance Plan (Repealed) (Source: Repealed at 17 Ill. Reg. 16918, effective September 27, 1993)

Section 219.883 Special Requirements for Compliance Plan (Repealed) (Source: Repealed at 17 Ill. Reg. 16918, effective September 27, 1993)

Section 219.886 Emissions Testing (Renumbered) (Source: Renumbered to Section 219.644 at 17 Ill. Reg. 16918, effective September 27, 1993) SUBPART II: FIBERGLASS BOAT MANUFACTURING MATERIALS

Section 219.890 Applicability a) Except as provided in subsection (b) of this Section, on and after May 1, 2012, the requirements of this Subpart shall apply to the owners or operators of sources that manufacture hulls or decks of boats from fiberglass, or that build molds to mak…

Section 219.891 Emission Limitations and Control Requirements a) Except as provided in subsection (f) of this Section, no owner or operator of a source subject to the requirements of this Subpart shall use a subject resin or gel coat at the source unless the resin and gel coat co…

Section 219.892 Testing and Monitoring Requirements a) Testing to demonstrate compliance with the requirements of Section 219.891 of this Subpart shall be conducted by the owner or operator by May 1, 2012. Thereafter, testing shall be conducted within 90 days after a request by t…