Illinois Administrative Code

Section 832.301 Time of Filing An application for renewal of a permit must be filed with the Agency at least 90 days prior to the expiration date of the existing permit.

Section 832.302 Effect of Timely Filing When a permittee has made timely and sufficient application for the renewal of a permit, the existing permit shall continue in full force and effect until the final Agency decision on the application and any final Board decision on any appe…

Section 832.303 Procedures for Permit Renewal Applications for permit renewal are to be subject to the requirements and time schedules set forth in Subpart A of this Part.

Section 888.100 General This Part sets forth the procedures to be followed by Remediation Applicants to obtain Agency review and approval of remediation costs before applying for the River Edge Redevelopment Zone Site Remediation Tax Credit under Section 201(n) of the Illinois In…

Section 888.105 Definitions Except as stated in this Section, or unless a different meaning of a word or term is clear from the context, the definitions of words or terms in this Part shall be the same as that applied to the same words or terms in the Environmental Protection Act…

Section 888.110 Severability If any Section, subsection, sentence, or clause of this Part is judged invalid, such adjudication shall not affect the validity of this Part as a whole or any Section, subsection, sentence, or clause thereof not judged invalid.

Section 888.115 Preliminary Review of Estimated Remediation Costs a) The Remediation Applicant for any remediation site enrolled in the Site Remediation Program may request a preliminary review of estimated remediation costs by submitting a budget plan along with the Remedial Act…

Section 888.120 Application for Review of Remediation Costs a) The Remediation Applicant for any remediation site enrolled in the Site Remediation Program may submit an application for review of remediation costs. No application shall be submitted until a No Further Remediation L…

Section 888.125 Agency Review of Application for Review of Remediation Costs a) The Agency shall review the application for review of remediation costs to determine, in accordance with Sections 888.135 and 888.140 of this Part, whether the costs incurred are remediation costs. b)…

Section 888.130 Fees and Manner of Payment a) There is no fee for the preliminary review of estimated remediation costs under Section 888.115 of this Part. b) The fee for the review of an application for review of remediation costs under Section 888.125 of this Part is $250 for e…

Section 888.135 Remediation Costs a) Activities, materials, labor, equipment, structure, and service costs that may be approved by the Agency as remediation costs for the River Edge Redevelopment Zone Site Remediation Tax Credit under Section 201(n) of the Illinois Income Tax Act…

Section 888.140 Ineligible Costs Costs ineligible for the River Edge Redevelopment Zone Site Remediation Tax Credit under Section 201(n) of the Illinois Income Tax Act [35 ILCS 5/201(n)] include, but are not limited to, the following: a) Costs not incurred by the Remediation Appl…

Section 900.101 Definitions Except as stated and unless a different meaning of a term is clear from its context, the definitions of terms used in this Chapter are the same as those used in the Environmental Protection Act. All definitions of acoustical terminology not specificall…

Section 900.102 Prohibition of Noise Pollution A person must not cause or allow the emission of sound beyond the boundaries of that person's property, as defined in Section 25 of the Environmental Protection Act [415 ILCS 5/25], that causes noise pollution in Illinois or violates…

Section 900.103 Measurement Procedures a) Procedures Applicable to All of 35 Ill. Adm. Code: Subtitle H, Chapter I The procedures for the measurement of sound under Subtitle H, Chapter I, except for Parts 900 and 901, must substantially conform to standards and recommended practi…

Section 900.104 Burden of Persuasion Regarding Exceptions (Repealed) (Source: Repealed at 42 Ill. Reg. 20432, effective November 1, 2018)

Section 900.105 Severability If any provision of this Chapter is adjudged invalid, or its application to any person or in any circumstances is adjudged invalid, that invalidity will not affect the validity of any other provision of this Chapter or of the Chapter as a whole. (Sour…

Section 900.106 Incorporations by Reference The Board incorporates the following material by reference. These incorporations include no later amendments or editions. a) American National Standards Institute, 25 West 43rd Street, 4th Fl., New York, NY 10036. (212)642-4900. 1) ANSI…

Section 900.APPENDIX A Old Rule Numbers Referenced (Repealed) (Source: Repealed at 42 Ill. Reg. 20432, effective November 1, 2018)

Section 901.101 Classification of Land According to Use a) The land use classification system for applying the numeric sound standards of this Part is based on the Land-Based Classification Standards (LBCS) (Jeer, Sanjay; 2001; Land-Based Classification Standards; online at https…

Section 901.102 Sound Emitted to Class A Land a) Except as elsewhere provided in this Part, a person must not cause or allow the emission of sound during daytime hours from any property-line noise source located on any Class A, B or C land to any receiving Class A land that excee…

Section 901.103 Sound Emitted to Class B Land Except as provided elsewhere in this Part, a person must not cause or allow the emission of sound from any property-line noise source located on any Class A, B or C land to any receiving Class B land that exceeds any allowable octave …

Section 901.104 Highly Impulsive Sound Except as provided elsewhere in this Part, a person must not cause or allow the emission of highly impulsive sound from any property-line noise source located on any Class A, B or C land to any receiving Class A or B land that exceeds the al…

Section 901.105 Impact Forging Operations a) For purposes of this Section, only the following are applicable: 1) "Daytime hours" means any continuous 16 hour period between 6:00 a.m. and 11:00 p.m. local time. 2) "Nighttime hours" means the 8 hours between 10:00 p.m. and 7:00 a.m…

Section 901.106 Prominent Discrete Tones a) A person must not cause or allow the emission of any prominent discrete tone from any property-line noise source located on any Class A, B or C land to any receiving Class A, B or C land, when measured at any point within the receiving …

Section 901.107 Exceptions a) Sections 901.102 through 901.106 do not apply to sound emissions from land used as specified by LBCS Codes 1100, 6600 and 5500. b) Sections 901.102 through 901.106 do not apply to sound emissions from emergency warning devices and unregulated safety …

Section 901.108 Compliance Dates for Part 901 (Repealed) (Source: Repealed at 42 Ill. Reg. 20453, effective November 1, 2018)

Section 901.109 Highly Impulsive Sound From Explosive Blasting a) During the daytime hours that cover the period after sunrise and before sunset, a person must not cause or allow any explosive blasting conducted on any Class C land, other than land used as specified by LBCS Codes…

Section 901.110 Amforge Operational Level (Repealed) (Source: Repealed at 42 Ill. Reg. 20453, effective November 1, 2018)

Section 901.111 Modern Drop Forge Operational Level (Repealed) (Source: Repealed at 42 Ill. Reg. 20453, effective November 1, 2018)

Section 901.112 Wyman-Gordon Operational Level (Repealed) (Source: Repealed at 42 Ill. Reg. 20453, effective November 1, 2018)

Section 901.113 Wagner Casting Site-Specific Operational Level (Repealed) (Source: Repealed at 30 Ill. Reg. 5533, effective March 10, 2006)

Section 901.114 Moline Forge Operational Level Moline Forge and future owners of the forging facility located at 4101 Fourth Avenue, Moline, Illinois, must comply with the following site-specific operational level: a) Operate no more than nine forging hammers at the same time; an…

Section 901.115 Cornell Forge, Hampshire Division Site-Specific Operational Level Cornell Forge, Hampshire Division and future owners of the forging facility located at Walker Road, Hampshire, Illinois, must comply with the following site-specific operational level: a) Operate no…

Section 901.116 Forgings and Stampings, Inc. Operational Level Forgings and Stampings, Inc. and future owners of the forging facility located at 1025 23rd Avenue, Rockford, Illinois, must comply with the following site-specific operational level: a) Operate no more than six forgi…

Section 901.117 Rockford Drop Forge Company Operational Level Rockford Drop Forge Company and future owners of the forging facility located at 2031 Ninth Street, Rockford, Illinois, must comply with the following site-specific operational level: a) Operate no more than 12 forging…

Section 901.118 Scot Forge Company − Franklin Park Division Operational Level Scot Forge and future owners of the forging facility located at 9394 W. Belmont Avenue, Franklin Park, Illinois, must comply with the following site-specific operational level: a) Operate no more than s…

Section 901.119 Clifford-Jacobs Operational Level Clifford-Jacobs Forging Company and future owners of the forging facility, located at 2410 North Fifth Street, Champaign, Illinois, must comply with the following site-specific operational level and sound limitations: a) Operate n…

Section 901.120 C.S. Norcross Operational Level C.S. Norcross & Sons Company and future owners of the forging facility located at the intersection of Davis and Dean Streets, Bushnell, Illinois, must comply with the following site-specific operational level: a) Operate no more tha…

Section 901.121 Vaughan & Bushnell Operational Level Vaughan & Bushnell Manufacturing Company and the future owners of the forging facility located at the intersection of Davis and Main Streets, Bushnell, Illinois, must comply with the following site-specific operational level: a…

Section 901.122 Elgin Facility Site-Specific Noise Emission Limitations The Combustion Turbine Power Generation Facility located at 1559 Gifford Road in Elgin, Illinois must not cause or allow the emission of sound from any property-line noise source located on that property that…

Section 901.APPENDIX A Old Rule Numbers Referenced (Repealed) (Source: Repealed at 42 Ill. Reg. 20453, effective November 1, 2018) LBCS Main Category Function Code Description 35 IAC 901 Land Class Residence or accommodation functions 1000 Residence or accommodation functions A 1…

Section 905.101 Exhaust Systems a) No person shall operate or cause or allow the operation of a snowmobile unless the exhaust system of such snowmobile is: 1) free from defects which interfere with sound reduction; 2) equipped with a muffler or other sound dissipative device; 3) …

Section 905.102 Noise Emission Standards a) No person shall operate or cause or allow the operation of a snowmobile manufactured after April 1, 1979 which generates a sound level in excess of 78 decibels on the A-scale at 50 feet when measured in accordance with procedures establ…

Section 905.103 Certification Requirement for Registration of New Snowmobiles a) No new snowmobile shall be registered for use in Illinois unless the application for registration includes a certification by the selling dealer that the snowmobile complies with Section 905.101 and …

Section 905.104 Exemptions to Part 905 a) Sections 905.101 and 905.102 shall not apply to any snowmobile while being used lawfully for racing competition or timed racing events. b) Sections 905.101, 905.102, and 905.103 shall not apply to those snowmobiles described in Ill. Rev. …

Section 905.105 Compliance Dates for Part 905 Except as otherwise provided in Section 905.104, every owner and operator of a snowmobile subject to this Part shall comply with the rules of this Part on and after November 8, 1981.

Section 905.APPENDIX A Old Rule Numbers Referenced The following table is provided to aid in referencing old Board rule numbers to section numbers pursuant to codification. Old Part 6 of Chapter 8 35 Ill. Adm. Code Part 905 Rule 601 Section 905.101 Rule 602 Section 905.102 Rule 6…

Section 910.100 General This Part provides specifications for sound measurement equipment as well as the specific sound measurement techniques to be used when conducting time-averaged sound level (Leq) measurements to determine whether a noise source is compliant with 35 Ill. Adm…

Section 910.102 Instrumentation a) Sound Measuring Equipment 1) Use an integrating sound level meter alone or in conjunction with an octave-band or ⅓ octave-band filter set or a real-time sound analyzer (octave-band or ⅓ octave-band) that complies with the following standards inc…