Oregon Administrative Code

918-500-0560 Siting Without Insignia Insignias of compliance are not required to site a manufactured dwelling, unless the requirement is provided by the municipality. Statutory/Other Authority: ORS 446.160 Statutes/Other Implemented: ORS 446.170 History: BCD 1-2010, f. 3-1-10, ce…

918-500-0570 Insignias and Labels (1) No person may remove, destroy, alter, or cover an insignia of compliance except as permitted by these rules. Insignias may be removed by the division or a municipality when a manufactured dwelling bearing an insignia is found to be in violati…

918-500-0580 Alterations (1) Alterations to manufactured dwellings include, but are not limited to any change, addition, alteration, repair, conversion, replacement, modification, refurbishing, re-manufacturing, or removal of any part of the manufactured dwelling or manufactured …

918-500-0590 Smoke Alarms Manufactured dwellings must have approved operating smoke alarms installed and located according to the following: (1) At the time of initial sale and installation, a new manufactured dwelling must have operating smoke alarms installed complying with the…

918-500-7000 Voluntary Ignition-Resistant Construction for Manufactured Dwellings and Self-Certification OAR 918-500-7000 to 918-500-7030 establishes voluntary standards for the construction of new ignition-resistant manufactured dwellings. Statutory/Other Authority: ORS 446.185 …

918-500-7010 Construction Standards for Voluntary Ignition-Resistant Construction for Manufactured Dwellings (1) The following standards are recognized in Oregon for manufactured dwellings: (a) The applicable construction standards of the Oregon Residential Specialty Code Section…

918-500-7020 Self-Certification and Label Requirements for Voluntary Ignition-Resistant Construction for Manufactured Dwellings (1) Either the manufacturer within the manufacturing facility or the contractor installing ignition-resistant construction systems on a manufactured dwe…

918-500-7030 Recognition of California Standards for Voluntary Ignition-Resistant Construction for Manufactured Dwellings The use of applicable construction standards and self-certification labels for manufactured dwellings and ignition-resistant construction systems under Cal. C…

918-515-0005 General (1) Any person who engages in the business of installing manufactured dwellings, cabanas, skirting, tie-downs, earthquake-resistant bracing systems (ERBs); who directs, supervises or controls installations or performs repairs to an existing installation shall…

918-515-0010 License Exceptions (1) Except as otherwise provided in this rule, no individual is required to obtain a license to install a manufactured dwelling, cabana, skirting, tie-downs, or ERBs when the manufactured dwelling or cabana being installed is owned by the same indi…

918-515-0020 Minimum Requirements of Educational Provider All manufactured dwelling installation education and continuing education classes used to satisfy the requirements of this rule must be approved by the division. All instructors teaching required manufactured dwelling inst…

918-515-0030 Course Curriculum Requirements for Educational Provider Training (1) The course curriculum shall be submitted to the division for approval and shall include a detailed description of course content and materials. (2) The course curriculum for manufactured dwelling in…

918-515-0040 Continuing Approval of Education Providers Educational Providers approved by the Division shall: (1) Revise and modify course curriculum to include statute, rule and standard changes to meet any additional course requirements established by the Division; (2) Submit a…

918-515-0060 Education Provider Scope of Work Approved Education Providers may: (1) Provide training and continuing education under the Division approved course curriculum to persons applying for license as a manufactured dwelling and cabana installer, limited installer, limited …

918-515-0080 Revocation or Suspension of Provider Approval Approval as an educational provider may be suspended or revoked for misuse of a Division examination, providing false records or information to the Division, helping or allowing a person to cheat or failure to comply with…

918-515-0110 Requirements for Installer License (1) To be licensed as a manufactured dwelling installer, an applicant must meet the following minimum experience requirements: (a) 1,600 hours experience as a manufactured dwelling installer in another state or 1,600 hours experienc…

918-515-0150 Manufactured Dwelling Installer License Requirements (1) An installer must: (a) Work for a business with a valid Construction Contractors Board license; or (b) The installer is a business with a valid Construction Contractors Board license. (2) Work covered by an ins…

918-515-0300 Manufactured Dwelling Installer License Responsibilities and Limits (1) Licensed manufactured dwelling installers and limited skirting installers installing manufactured dwellings, cabanas, tie-downs, ERB's, and skirting shall affix a division-issued certification ta…

918-515-0310 Certification Tag Installation Certification tags shall be affixed to the manufactured dwelling, cabana or skirting in a permanent manner and shall be located: (1) On a cabana: In a visible location on an exterior wall; (2) On a manufactured dwelling: In a visible lo…

918-515-0330 Denial of Certification Tags The division may deny any request for certification tags when: (1) An inspection reveals that a manufactured dwelling, cabana, skirting, tie-down, or ERB installation is not installed according to the Oregon Manufactured Dwelling Installa…

918-515-0340 Monthly Certification Tag Report (1) A manufactured dwelling dealer, licensed installer or limited skirting installer who has purchased certification tags directly from the Division shall submit a certification tag report to the Division on the last day of each month…

918-515-0350 Issuance and Possession of License (1) A manufactured dwelling installer license, limited installer license, temporary limited installer license, and limited skirting installer license are issued to the individual named on the application and is not transferable. (2)…

918-515-0360 License Renewal (1) Licenses issued under ORS chapter 446 and 918-515-0480 expire on January 1 of the second year following issuance. (2) An application for renewal of a current license must provide: (a) Evidence of continuing education credits; and (b) The required …

918-515-0370 License Suspension and Revocation (1) The director may suspend or revoke a manufactured dwelling installer license, limited installer license, or limited skirting installer license issued by the division. (2) The basis for such suspension or revocation of a license m…

918-515-0380 Continuing Education Requirements (1) Licensed installers, limited installers and limited skirting installers shall attend Division-approved continuing education classes. (2) Continuing education classes shall only be provided by the Division or a Division-approved p…

918-515-0400 Limited Installer License Minimum Requirements To be licensed as a manufactured dwelling limited installer, an applicant shall: (1) Provide personal identification; (2) Submit to the Division a completed application, together with the required fees; and (3) Attend a …

918-515-0415 Temporary Limited Installer License A temporary limited installer license allows persons to perform all of the work performed by a limited installer, subject to the following conditions: (1) The temporary license shall be valid for a period of 60 days and all work pe…

918-515-0430 Limited Installer Scope of Work A licensed limited installer may: (1) Assist a licensed installer in the installation of a manufactured dwelling or cabana when under the direct supervision of licensed installer; or (2) Assist a licensed limited skirting installer in …

918-515-0480 Limited Skirting Installer License Requirements To be licensed as a limited skirting installer, an applicant must: (1) Provide personal identification; (2) Submit a completed application, together with the fee required in OAR 918-500-0100; and (3) Attend a division-a…

918-515-0485 Limited Skirting Installer Responsibilities and Limits (1) A limited skirting installer must: (a) Work for a business with a valid Construction Contractors Board License; or (b) Be a business with a valid Construction Contractors Board license. (2) Work covered by a …

918-515-0490 Limited Skirting Installer Responsibilities to Consumer A limited skirting installer must, at a minimum: (1) Install the skirting, underfloor skirting access, underfloor ventilation, and underfloor dryer and range exhaust ducts and terminations through the skirting w…

918-550-0000 Purpose and Scope (1) OAR 918-550-0000 through 918-550-0600 establish requirements and procedures to obtain an ownership document for a manufactured structure, or to obtain an ownership document for a manufactured structure that previously did not require a title or …

918-550-0010 Definitions For the purposes of this division of rules, the following definitions apply, unless the context requires otherwise: (1) “Division” means the appropriate division within the Department of Consumer and Business Services, Building Codes Division, or the coun…

918-550-0020 Agents of the Department (1) No county may carry out functions under ORS 446.566 to 446.646 related to manufactured structure ownership documents and trip permits unless it has entered into and maintained participation in an agent agreement with and approved by the d…

918-550-0030 Division Approved Forms (1) The following forms are approved by the division for use with the Manufactured Home Ownership Document Software system: (a) Abandonment Affidavit for Manufactured Homes, form 2951; (b) Affidavit to Establish Ownership of a Manufactured Str…

918-550-0040 Transaction Requirements (1) To be processed and completed, a transaction must have all required forms and attachments completed, including a county tax certification form, and all fees paid in full. (2) To provide for uniform administration and customer interaction …

918-550-0100 Ownership Document Requirements (1) Except as provided in ORS 446.626, all owned manufactured structures in the State of Oregon must be registered or titled with DMV, or be issued an ownership document by the division after May 1, 2005. (2) All applications for owner…

918-550-0120 Sale of a Used Manufactured Structure If a purchaser submits a division approved notice of sale under ORS 446.641(8), the purchaser must include one or more of the following as acceptable proof of sale: (1) A bill of sale from the current owner of record on the divis…

918-550-0140 Notice of Transfer of Interest in Manufactured Structure (1) A person who releases, terminates, assigns or otherwise transfers an interest in a manufactured structure, shall within 30 days of the transfer, submit a completed and notarized copy of the division approve…

918-550-0200 Abandoned Manufactured Structures (1) If a landlord complies with the notice requirements of ORS 90.425 or 90.675 such that a manufactured structure is presumed abandoned, the landlord may apply for an ownership document by submitting a completed division approved ap…

918-550-0600 Trip Permit Requirements (1) A trip permit is required to move a manufactured structure from one location to another unless exempted under ORS 446.631 & 446.646. A person desiring a trip permit to move a manufactured structure shall submit a completed division approv…

918-600-0005 Definitions The following definitions shall apply to OAR 918, division 600 and are in addition to those definitions included in ORS Chapters 446 and 455: (1) “Administrator” means the Administrator of the Building Code Division. (2) “Authority Having Jurisdiction” me…

918-600-0010 Scope These rules and the Oregon Manufactured Dwelling and Park Specialty Code, 2002 Edition, including amendments adopted effective April 1, 2005 establish minimum safety standards for the design and construction of mobile home and manufactured dwelling parks in acc…

918-600-0020 Permit Required No person, firm or corporation shall establish, construct, enlarge, or alter any mobile home or manufactured dwelling park or cause the same to be done without first obtaining all required permits from issuing authority and paying the prescribed permi…

918-600-0030 Fees — Expiration — Validity (1) Construction Permit Fee. The construction permit fee shall be as set forth in sections (5) and (6) of this rule or as established by the municipality administering the manufactured dwelling or mobile home park program and shall be pai…

918-650-0000 Reasonable Notice to Interested Parties Prior to the adoption, amendment or repeal of any rule relating to the minimum safety standards for the design and construction of recreational parks and organizational camps as authorized in ORS 455.680, the Building Codes Div…

918-650-0005 Definitions As used in OAR 918-650-0000 to 918-650-0085, unless the context requires otherwise, the following definitions apply: (1) “Alteration” means any change, addition or modification of roads, streets, spaces or construction, but does not include normal mainten…

918-650-0010 Scope and Purpose (1) OAR chapter 918, division 650 establishes minimum safety standards for the design and construction of recreation parks and organizational camps as authorized in ORS 455.680. (2) These rules establish design and construction requirements for recr…

918-650-0020 Permit Required No person may establish or enlarge the facilities of any recreation park or organizational camp or do any construction within the recreation park or organizational camp or cause the same to be done without first obtaining all required permits from the…

918-650-0025 Coordinating Regulation Permit Issuance: (1) The application, plans, specifications, computations and other data filed by an applicant must be reviewed by the building official. Such plans may be reviewed by other departments or agencies to verify compliance with any…