South Carolina Administrative Code

8-607. Approved Inspection Agency Authority. (1) An approved inspection agency shall conduct inspections at the manufacturing plant to deter- mine compliance with the approved plans, the Act and these regulations. Violations of any of the provisions of these regulations or variat…

8-608. Quality Control Procedures. (1) The manufacturer shall establish a written agreement with an inspection agency approved by the Council, clearly stating the quality control procedures which it shall institute in its manufacturing facilities. The quality control procedures s…

8-609. Change in Status, Alterations. (1) Changes to approved plans. (a) If the manufacturer proposes to change any portion of its system or model designs, or if the Council regulations are amended to necessitate such change, it shall be required to submit to the Council, through…

8-610. Alternate Methods and Materials. (1) The provision of these regulations are not intended to prevent the use of any material, appliance, device, system arrangement, or method of construction not specifically prescribed in accepted model codes, provided any such alternate ha…

8-611. Approved Inspection Agency: Inspection. (1) Inplant inspections. The approved inspection agency shall conduct announced and unan- nounced inspections at the manufacturing site to review any or all aspects of manufacturer’s production and quality control procedures. The app…

8-612. Reciprocity. (1) A modular building sold or erected in South Carolina, which has been inspected under a reciprocal agreement with another state, shall bear the certification label of South Carolina, and the certification label of the inspecting state or a common label appr…

8-613. Multiple Site Manufacturing. (1) If a manufacturer plans to produce at more than one (1) location, required plan approval may be obtained for all locations subject to submission of the following: (a) one (1) set of plan review application forms for each location; and (b) o…

8-614. Council Certification Label. (1) Each modular building, section, or component containing any portion of a closed system shall bear a certification label prior to leaving the manufacturing plant unless otherwise authorized by the Council. Each certification label shall be a…

8-615. Certification Label Application and Issuance. (1) A certification label request application, along with the appropriate fee, shall be submitted by the manufacturer to the Council. The application shall include the manufacturer’s model serial number of each unit for which a…

8-616. Repealed. HISTORY: Former Regulation, titled Certification Label Denial, had the following history: Added by State Register Volume 32, Issue No. 6, eff June 27, 2008. Amended by State Register Volume 37, Issue No. 5, eff May 24, 2013. Repealed by SCSR 48-5 Doc. No. 5248, e…

8-617. Removal of Certification Labels. (1) In the event that a modular building or component bearing a certification label is found to be in violation of the approved plans, the approved inspection agency or the Council shall remove the certification label and furnish the manufa…

8-618. Schedule of Fees. The Council may charge fees as shown in South Carolina Code of Regulations Chapter 10-7. All application and filing fees are payable at the time of submittal and are nonrefundable. HISTORY: Added by State Register Volume 32, Issue No. 6, eff June 27, 2008…

8-619. Appeal Procedures. (1) Any person or organization aggrieved by the application of these regulations may initiate an appeal by writing to the Council within thirty (30) days following the date of action upon which the appeal is based. The request shall contain: (a) the name…

8-620. License Application Requirements. (1) Every manufacturer that produces modular buildings to be erected in South Carolina, must be licensed in accordance with the Act and these regulations. The application for a modular building manufacturer’s license shall include, but not…

8-621. Sale of Modular Buildings. (1) Only South Carolina licensed manufacturer’s representatives or South Carolina licensed home- builders or South Carolina licensed general contractors in the building classification within the group limitations of the license are permitted to s…

8-622. License Issued. (1) A license shall be issued by the Council when it is determined that the information contained on the application is in compliance with these regulations. (2) Any change in the information presented on the original application shall be submitted to the C…

8-623. Security Requirement. Before any license may be issued, a corporate surety bond or other security approved by the Council must be provided. The bond must designate the licensee as principal and be issued for the biennial period of the license. Bonds shall be in the amount …

8-624. Duties and Responsibilities of Council. (1) The Council shall keep minutes and records of all its transactions, proceedings and meetings, and duly certified copies thereof shall be sufficient to comply with the rules of evidence. (2) The Council shall investigate on its ow…

8-625. Denial, Revocation or Suspension of License. In addition to the grounds provided for in Section 40-1-110, the Council, upon a majority vote, may cancel, suspend, refuse, deny, revoke or restrict any license issued for any of the following reasons: (a) providing false or in…

8-626. Erection. (1) Modular buildings shall be erected by South Carolina licensed general contractors or residential home builders within the limitations of their license classifications in accordance with the manufactur- er’s recommended erection procedures and the building cod…

8-627. Exemption. (1) Factory built structures meeting all of the following criteria will be exempt from these regula- tions. To be exempt the unit must: (a) be designed for continuous over-the-road travel; and (b) have a maximum width of eight (8) feet in its transportable mode;…

8-628. Recertifying. (1) Modular buildings, originally constructed, certified and labeled in accordance with the act and these regulations, may be recertified and relabeled if all of the following conditions are met. (a) the original manufacturer must hold a current license issue…

8-629. License Renewal. (1) Licenses must be renewed biennially and shall be lapsed if not renewed prior to expiration of the preceding licensure period. (2) License renewal notices shall be sent to all individuals and entities licensed with the Council at the last known address …

8-630. Damaged Units or Components. The Council shall require that any modular building unit or component damaged between the point of manufacture and the site of initial installation shall be brought into compliance with the Act, these regulations and the accepted model codes, i…

8-700. South Carolina Barrier Free Building Design. HISTORY: Added by State Register Volume 32, Issue No. 6, eff June 27, 2008, replaced the former 19-400. Editor’s Note This regulation replaces R. 19-400 through 19-400.3.

8-701. Authority. (A) With the exception of one and two family detached dwellings and other residential buildings to be offered for sale as individual dwelling units, every building or structure shall have all levels and areas made accessible to disabled persons in accordance wit…

8-702. Application. (A) There shall be no construction, alteration or leasing of a government building nor construction or renovation of a public building except in conformity with these Regulations. If the occupancy as defined in the Building Code adopted by Section 6-9-50, of a…

8-703. Administration. (A) Interpretation of these Regulations and provisions herein shall be the responsibility of the local building officials, in consultation with the appropriate State Officials where necessary. However, request for interpretation may be forwarded to the Acce…

8-800. International Building Code. NOTE-This article is based upon the International Building Code, 2021 Edition, in accordance with the statutory amendments to acts governing the Building Codes Council, except for the modifications referenced below. This code is identical to th…

8-801. IBC Section 101.4.7 Existing Buildings. The provisions of the South Carolina Existing Building Code shall apply to matters governing the repair, alteration, change of occupancy, addition to and relocation of existing buildings.

8-802. IBC Section 101.4.7.1 Structural Concrete. In addition, assessment, repairs, restoration of structural concrete in accordance with ACI 562 shall be permitted. Exception: ACI 562 shall not be used for the evaluation or design of repairs or rehabilitation of elements of seis…

8-803. IBC Section 202. Definitions The following two definitions are added to those appearing in Section 202 of the 2021 International Building Codes: Vapor Retarder, Ground Contact: Ground contact vapor retarder class shall be defined using the requirements of ASTM E1745, Class…

8-804. IBC Section 303.4 Assembly Group A-3 Add to the listing of A-3 occupancies the following use: Structures, without a commercial kitchen, used in agritourism activity as defined by S.C. Code Ann. 46-53-10(1).

8-805. IBC Section 312.1 General The term ‘‘Primitive Camp Structure’’ is added to the list of examples in this section for Group U.

8-806. IBC Section 706.1 General. Fire walls shall be constructed in accordance with Sections 706.2 through 706.11. Each portion of a building separated by one or more firewalls may be considered a separate building. The extent and location of such fire walls shall provide a comp…

8-807. IBC Section 1010.2.13 Controlled egress doors in Groups I-1 and I-2 as well as I-4 (Adult Day Care occupancy only).Electric locking systems, including electro-mechanical locking systems and electromagnetic locking systems, shall be permitted to be locked in the means of eg…

8-808. IBC Section 1016.2 Egress through intervening spaces. Egress through intervening spaces shall comply with this section. 1. Exit access through an enclosed elevator lobby is permitted. Where access to two or more exits or exit access doorways is required in Section 1006.2.1…

8-809. IBC Section 1803.2 Investigation required. Geotechnical investigations shall be conducted in accordance with Sections 1803.3 through 1803.5. Exceptions: 1. The building official shall be permitted to waive the requirement for a geotechnical investiga- tion where satisfacto…

8-810. IBC Section 1907.1 General. The thickness of concrete floor slabs supported directly on the ground shall not be less than 3 1/2 inches (89mm). A 10-mil (0.010 inch) polyethylene ground contact vapor retarder with joints lapped not less than 6 inches (152 mm) shall be place…

8-811. IBC Section 2303.2.2 Other means during manufacture For wood products impregnated with chemicals by other means during manufacture, the treatment shall be an integral part of the manufacturing process of the wood product. The treatment shall provide permanent protection to…

8-812. IBC Section Appendix H Signs. Adopt Appendix H. HISTORY: Added by State Register Volume 37, Issue No. 6, eff June 28, 2013. Amended by State Register Volume 40, Issue No. 6, Doc. No. 4602, eff June 24, 2016; SCSR 43-5 Doc. No. 4847, eff May 24, 2019; SCSR 44-6 Doc. No. 493…

8-900. International Fire Code. NOTE-This article is based upon the International Fire Code, 2021 Edition, in accordance with the statutory amendments to acts governing the Building Codes Council, except for the modifications referenced below. This code is identical to the 2021 E…

8-901. IFC Section 202 General definitions. Recreational Fire: An outdoor fire burning materials other than rubbish where the fuel being burned is not contained in an incinerator, outdoor fireplace, portable outdoor fireplace, barbeque grill or barbeque pit and has a total fuel a…

8-902. IFC Section 202 General definitions. Primitive Camp Structure: Shall include any structure permanent or temporary in nature, used for outdoor camping (transient), open on at least one side with no fully enclosed habitable spaces, less than 400 square feet under roof, and n…

8-903. IFC Section 202 General definitions. Add to the listing of A-3 occupancies: Structures, without a commercial kitchen, used in agritourism activity as defined by S.C. Code Ann. 46-53-10(1).

8-904. IFC Section 315.3.3 Equipment rooms. Material shall not be stored in boiler rooms, mechani- cal rooms, electrical equipment rooms or in fire command centers as specified in Section 508.1.5. Rooms shall be labeled with appropriate signage ‘‘No storage allowed.’’

8-905. IFC Section 319.11 Clearance requirements. Mobile cooking operations shall be separated from buildings, structures, canopies, tents, combustible materials, vehicles, and other cooking operations by a minimum of 10 feet. Exhaust shall be directed away from openings, air int…