Washington Administrative Code

(1) Labels on shipped containers. The chemical manufacturer, importer, or distributor must ensure that each container of hazardous chemicals leaving the workplace is labeled, tagged, or marked. Hazards not otherwise classified, and hazards identified and classified under WAC 296-…

(1) Chemical manufacturers and importers must obtain or develop a safety data sheet for each hazardous chemical they produce or import. Employers must have a safety data sheet in the workplace for each hazardous chemical which they use.(2) The chemical manufacturer or importer mu…

(1) Employers must provide employees with effective information and training on hazardous chemicals in their work area at the time of their initial assignment, and whenever a new chemical hazard the employees have not previously been trained about is introduced into their work ar…

(1) The chemical manufacturer, importer, or employer may withhold the specific chemical identity, including the chemical name, other specific identification of a hazardous chemical, and/or the exact percentage (concentration) or concentration range of the substance in a mixture, …

(1) During the transition period between the adoption date of this rule and the effective dates listed below, employers may comply with the applicable requirements in the employer chemical hazard communication standards under WAC 296-800-170 and chapter 296-307 WAC, Part Y-1, or …

A.0 GENERAL CLASSIFICATION CONSIDERATIONSA.0.1 ClassificationA.0.1.1 The term "hazard classification" is used to indicate that only the intrinsic hazardous properties of chemicals are considered. Hazard classification incorporates three steps:(a) identification of relevant data r…

B.1 EXPLOSIVESB.1.1 Definitions and general considerations.B.1.1.1 An explosive chemical is a solid or liquid chemical which is in itself capable by chemical reaction of producing gas at such a temperature and pressure and at such a speed as to cause damage to the surroundings. P…

C.1 The label for each hazardous chemical must include the product identifier used on the safety data sheet.C.1.1 The labels on shipped containers must also include the name, address, and telephone number of the chemical manufacturer, importer, or responsible party.C.2 The label …

A safety data sheet (SDS) must include the information specified in Table D.1 under the section number and heading indicated for sections 1-11 and 16. If no relevant information is found for any given subheading within a section, the SDS must clearly indicate that no applicable i…

The following is a reprint of the "Restatement of Torts" section 757, comment b (1939):b. "Definition of trade secret." A trade secret may consist of any formula, pattern, device or compilation of information which is used in one's business, and which gives him an opportunity to …

The mandatory criteria for classification of a chemical for carcinogenicity under HCS are found in WAC 296-901-14022 (A.6). This non-mandatory Appendix provides additional guidance on hazard classification for carcinogenicity. Part A of Appendix F includes background guidance pro…

(1) The purpose of this chapter is to set guidance and eligibility requirements for a grant program for small employers in need of assistance during a state of emergency declared under RCW 43.06.010.(2) The grant program provides for one-time grants to small employers for purchas…

(1) "Department" means the department of labor and industries.(2) "Director" means the director of the department of labor and industries.(3) "Government" means local, state, or federal government.(4) "Employee" means a "worker" for workers' compensation coverage purposes, as def…

(1) The small employer emergency safety grant program will only be available when the following are met:(a) The governor has declared a state of emergency as defined in RCW 43.06.010; and(b) The director authorizes the use of reserve funds to activate the grant program.(2) In ord…

The following must be met to be considered eligible for a small employer emergency safety grant:(1) The applicant must be a small employer as defined in WAC 296-910-003.(2) The applicant must have a need to purchase equipment, gear or make capital improvements to comply with new …

(1) Eligible employers must apply for a small employer emergency safety grant using the department's grant application process.(2) The application information will include, but not be limited to:(a) Name of employer;(b) For businesses, name and contact information of owner(s); fo…

(1) The department will announce when small employer emergency grant applications are being accepted and the eligible region, based on the declared state of emergency.(2) If an eligible employer purchased qualified safety items during a declared emergency and the grant applicatio…

The factors the department will consider in prioritizing grant awards include, but are not limited to:(1) Total number of employees;(2) Total number of employees affected;(3) Whether an employer provides critical goods or services to the affected community;(4) Level of impact fro…

(1) Grant recipients must keep records and receipts related to an awarded small employer emergency safety grant for six years. These records must be made available for inspection upon request by the department.(2) Upon request, grant recipients must allow the department on-site t…

This chapter is authorized by chapter 70.87 RCW covering elevators, lifting devices, moving walks, and other conveyances. The purpose of this chapter is to:(1) Provide for the safe design, installation, mechanical and electrical operation, maintenance, examinations, safety tests …

Conveyances are required to comply with rules and standards that:(1) Were in effect at the time of the original installation orat the time of any alteration;(2) Apply to new and existing elevators (see ASME A17.1/CSA B44 1.1.3); and(3) Apply to ASME A17.3, Safety Code for Existin…

ELEVATOR CODES AND SUPPLEMENTS ADOPTEDTYPE OFCONVEYANCECODE AND SUPPLEMENTSDATE INSTALLEDCOMMENTSFROMTOElevators, Dumbwaiters,EscalatorsAmerican Standard Safety Code (ASA) A17.1, 196011/1/196312/29/1967Adopted StandardNATIONAL ELEVATOR CODES AND SUPPLEMENTS ADOPTEDTYPE OFCONVEYAN…

The department amends the following adopted standards:(1) ASME A17.1/CSA B44, all amendments to this standard are as follows:(a) Section 1.2 Purpose and Exceptions amended as follows: The purpose of this code is to provide for the safety of life and limb, and to promote the publi…

The following definitions apply to this chapter (see RCW 70.87.010 and ASME A17.1/CSA B44 for additional definitions necessary for use with this chapter):(1) "ANSI" means the American National Standard Institute.(2) "ASA" means the American Safety Association.(3) "ASME" means the…

(1) The purpose of the advisory committee is to advise the department on the adoption of regulations that apply to conveyances; methods of enforcing and administering the elevator law, chapter 70.87 RCW; and matters of concern to the conveyance industry and to the individual inst…

(1) Chapter 70.87 RCW provides the authority for the duties and responsibilities of the department. Except as provided in chapter 70.87 RCW and this chapter, all appeals and hearings will be conducted according to chapter 34.05 RCW, the Administrative Procedure Act and chapter 10…

(1) It is unlawful for any person, firm, partnership, corporation, or other entity to advertise, offer to do work, submit a bid, engage in, conduct, or carry on the business of installing, repairing or maintaining conveyances without having a current and valid elevator contractor…

(1) An elevator mechanic license issued under chapter 70.87 RCW and this chapter is not required for:(a) Individuals who install signal systems, fans, electric light fixtures, illuminated thresholds, finished cab flooring materials that are identical to existing materials and fee…

Elevator contractor licenses issued under chapter 70.87 RCW and this chapter are not required for:(1) An owner or regularly employed employee of the owner performing only maintenance work of conveyances in accordance with RCW 70.87.270.(2) Permanent removal of a stairway chairlif…

(1) Any sole proprietor, firm or corporation wishing to engage in the business of installation, alteration, service, replacement of maintenance of equipment covered by this chapter within the state of Washington shall apply for a license with the department of labor and industrie…

(1) Duties of the primary point of contact are as follows:(a) Enrolling in the department of labor and industries elevator program distribution email system via website;(b) Ensuring the primary point of contact information is updated and correct. This ensures you may be reached d…

(1) Any person wishing to engage in the installation, alteration, service, replacement or maintenance of equipment covered by this chapter within the state of Washington shall apply for a license with the department of labor and industries.(2) Applicants for a category (01) licen…

If a required safety device or electrical protective device is found ineffective during normal operation the conveyance shall be immediately taken out of service. If the authorized mechanic or elevator company is found responsible for disabling the device(s) and placing the conve…

(1) General.(a) Applicants for an elevator mechanic license shall have an acceptable combination of documented experience and education credits in the category of license sought as prescribed in Table 1 of this section to qualify for licensing.(b) An acceptable combination of doc…

The following are the licensing categories for qualified elevator mechanics or temporary elevator mechanics:(1) Category (01): A general elevator mechanic license encompasses the installation, alteration, maintenance, inspection, relocation, decommission, removal, and repair of a…

(1) An elevator contractor or elevator mechanic license issued pursuant to this chapter shall be valid for a period of two years and may be renewed by submission of a renewal application to the department, payment of a renewal fee as specified in WAC 296-96-00922 and proof of com…

The department shall produce a list of all approved training course providers and/or course contact persons that provide continuing education courses required under chapter 70.87 RCW and this chapter. This list will be available to all renewal applicants who request it. The depar…

(1) The department approves continuing education course providers.(2) The department will review and approve courses.(a) All providers seeking course approval shall submit the required information to the department on a form provided by the department.(b) The courses shall be tau…

The following individuals are exempt from continuing education requirements:(1) A licensee who is unable to complete the continuing education course required under this section before the expiration of his or her license due to a temporary disability may apply for a waiver from t…

Examinations shall be held at locations and times when considered necessary by the department. The department will notify qualified applicants of the date, time, and location of the examination.[Statutory Authority: Chapter 70.87 RCW. WSR 18-18-068, § 296-96-00920, filed 8/31/18,…

(Effective until July 1, 2026)The following are the department's elevator license fees:Type of FeePeriod Coveredby FeeDollar Amountof FeeElevator contractor/mechanic application fee (not required for renewal of valid license)Per application$ 92.20Elevator contractor/ mechanic exa…

(1) If the department determines that a person, firm, or company has violated the licensing requirements of chapter 70.87 RCW or this chapter, the department may issue a civil penalty describing the reasons for the violation(s). The department may issue a civil penalty to:(a) A p…

The department may deny renewal or application of, or suspend a license if there are any outstanding final judgments.[Statutory Authority: Chapter 70.87 RCW. WSR 18-18-068, § 296-96-00930, filed 8/31/18, effective 10/1/18. Statutory Authority: RCW 70.87.020, 70.87.030, 70.87.034,…

(1) Prior to construction, alteration, or relocation of any conveyance, the licensed elevator contractor shall:(a) Submit an installation application to the department. See WAC 296-96-01010 through 296-96-01025.(b) Submit plans to the department for approval. See WAC 296-96-01030…

(1) See WAC 296-96-01000 for the permit process.(2) Construction and alteration permits are valid for one year from the date of issue. However, permits may be renewed if:(a) Application for a renewal permit is submitted before the current permit expires;(b) The department approve…

(1) All installations and relocation of conveyances that require permitting and inspection shall be performed by elevator mechanics licensed to perform work in the appropriate category. (See WAC 296-96-00910.)(2) Items identified in ASME A17.1/CSA B44, Section 8.7 as alterations …

A licensed elevator mechanic working for a licensed elevator company shall decommission the conveyance according to ASME A17.1/CSA B44. If the elevator is the only one in the building and the owner/agent wants the conveyance decommissioned the owner/agent shall obtain a letter of…

The department may only issue a permit for conveyance work to a licensed elevator contractor. Permits are only required for alterations, relocations and installations.[Statutory Authority: Chapter 70.87 RCW. WSR 18-18-070, § 296-96-01009, filed 8/31/18, effective 10/1/18; WSR 07-…

Prior to the start of construction and the issuance of a permit, the applicant shall submit to the department for approval a permit application and plans for new installations or major alterations. To be approved, the plan shall comply with the latest adopted applicable standard …

The initial inspection of construction, alteration, or relocation of a conveyance is included with the permit fee under WAC 296-96-01085. Once the department has approved the initial installation of the conveyance, a temporary 30-day operating certificate will be issued. Prior to…