Hazardous Waste Treatment, Storage and Disposal Facility Standards

NR 664.1032 Standards: process vents. Subchapter A — General NR 664.0001 Purpose, scope and applicability. (1) The purpose of this chapter is to establish minimum state standards which define the acceptable management of hazardous waste. (2) The standards in this chapter apply to…

NR 664.1033 Standards: closed-vent systems and control devices. (1) (a) Owners or operators of closed-vent systems and control devices used to comply with provisions of this chapter shall comply with this section. (b) 1. The owner or operator of an existing facility who cannot in…

NR 664.1034 Test methods and procedures. (1) Each owner or operator subject to this subchapter shall comply with the test methods and procedures requirements in this section. (2) When a closed-vent system is tested for compliance with no detectable emissions, as required in s. NR…

NR 664.1035 Recordkeeping requirements. (1) (a) Each owner or operator subject to this subchapter shall comply with this section. (b) An owner or operator of more than one hazardous waste management unit subject to this subchapter may comply with the recordkeeping requirements fo…

NR 664.1036 Reporting requirements. (1) Owners and operators subject to this subchapter shall submit a semiannual report to the department by dates specified by the department. The report shall include all of the following information: (a) The EPA identification number, name and …

NR 664.1050 Applicability.

NR 664.1051 Definitions.

NR 664.1052 Standards: pumps in light liquid service.

NR 664.1053 Standards: compressors.

NR 664.1054 Standards: pressure relief devices in gas or vapor service.

NR 664.1055 Standards: sampling connection systems.

NR 664.1056 Standards: open-ended valves or lines.

NR 664.1057 Standards: valves in gas or vapor service or in light liquid service.

NR 664.1058 Standards: pumps and valves in heavy liquid service, pressure relief devices in light liquid or heavy liquid service and flanges and other connectors.

NR 664.1059 Standards: delay of repair.

NR 664.1060 Standards: closed-vent systems and control devices.

NR 664.1061 Alternative standards for valves in gas or vapor service or in light liquid service: percentage of valves allowed to leak.

NR 664.1062 Alternative standards for valves in gas or vapor service or in light liquid service: skip period leak detection and repair.

NR 664.1063 Test methods and procedures.

NR 664.1064 Recordkeeping requirements.

NR 664.1065 Reporting requirements. Subchapter CC — Air Emission Standards for Tanks, Surface Impoundments and Containers

NR 664.1080 Applicability.

NR 664.1081 Definitions.

NR 664.1082 Standards: general.

NR 664.1083 Waste determination procedures.

NR 664.1084 Standards: tanks.

NR 664.1085 Standards: surface impoundments.

NR 664.1086 Standards: containers.

NR 664.1087 Standards: closed-vent systems and control devices.

NR 664.1088 Inspection and monitoring requirements.

NR 664.1089 Recordkeeping requirements.

NR 664.1090 Reporting requirements. Subchapter DD — Containment Buildings

NR 664.1100 Applicability.

NR 664.1101 Design and operating standards.

NR 664.1102 Closure and long-term care. Subchapter EE — Hazardous Waste Munitions and Explosives Storage

NR 664.1200 Applicability.

NR 664.1201 Design and operating standards.

NR 664.1202 Closure and long-term care. (5) The requirements of this chapter do not apply to the owner or operator of a POTW who treats, stores or disposes of hazardous waste in compliance with s. NR 670.001 (3) (b) 9. (7) The requirements of this chapter do not apply to any of t…