Wisconsin Administrative Code

NR 254.10 Applicability; description of the cold forming subcategory. (1) This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from cold rolling and cold working pipe and tube operations in which unheated stee…

NR 254.101 Specialized definitions.

NR 254.102 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.

NR 254.103 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.

NR 254.104 New source performance standards.

NR 254.105 Pretreatment standards for existing sources.

NR 254.106 Pretreatment standards for new sources.

NR 254.107 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology. the chapter was last published. NR 254.001 WISCONSIN ADMINISTRATIVE CODE 2 Subchapter XI — Alkaline Cleaning Subcateg…

NR 254.11 Applicability; description of the alkaline cleaning subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from operations in which steel and steel products are immersed in alkaline cleani…

NR 254.111 Specialized definitions.

NR 254.112 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.

NR 254.113 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.

NR 254.114 New source performance standards.

NR 254.115 Pretreatment standards for existing sources.

NR 254.116 Pretreatment standards for new sources.

NR 254.117 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology. Subchapter XII — Hot Coating Subcategory NR 254.12 Applicability; description of the hot coating subcategory.

NR 254.12 Applicability; description of the hot coating subcategory. (1) This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from operations in which steel is coated with zinc, terne metal, or other metals by…

NR 254.121 Specialized definitions.

NR 254.122 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.

NR 254.123 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.

NR 254.124 New source performance standards.

NR 254.125 Pretreatment standards for existing sources.

NR 254.126 Pretreatment standards for new sources.

NR 254.127 Effluent limitations representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology.

NR 255.01 Purpose. The purpose of this chapter is to establish effluent limitations, standards of performance, and pretreatment standards for discharges of process wastes from the battery manufacturing category of point sources and its subcategories. History: Cr. Register, Novemb…

NR 255.015 Applicability. NR 255.02 General definitions. NR 255.03 Monitoring and reporting requirements. NR 255.04 Compliance date for PSES. Subchapter II — Cadmium Subcategory NR 255.10 Applicability; description of the cadmium subcategory. NR 255.11 Effluent limitations repres…

NR 255.02 General definitions. In addition to the definitions set forth in ch. NR 205 and s. NR 211.03, the following definitions apply to this chapter: (1) XAncillary operationsY means all of the operations specific to battery manufacturing and not included specifically within a…

NR 255.03 Monitoring and reporting requirements. Compliance with the maximum monthly average effluent limitations and pretreatment standards listed in the tables for each regulated process is required regardless of the number of samples analyzed and averaged. The maximum monthly …

NR 255.04 Compliance date for PSES. The compliance date for pretreatment standards for existing sources is March 9, 1987. History: Cr. Register, November, 1987, No. 383, eff. 12-1-87. Subchapter II — Cadmium Subcategory

NR 255.10 Applicability; description of the cadmium subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from manufacturing cadmium anode batteries. 1

NR 255.11 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. (1) Except as provided in 40 CFR 125.30 to 125.32, any existing source subject to this subchapter shall achie…

NR 255.12 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. (1) Except as provided in 40 CFR 125.30 to 125.32, any existing source subject to this subchapter shall achieve the…

NR 255.13 New source performance standards. (1) The discharge of wastewater pollutants from any new source subject to this subchapter may not exceed the following standards: Table 22 Miscellaneous Wastewater Streams NSPS Table 19 Electrodeposited Anodes NSPS 1 POLLUTANT OR POLLUT…

NR 255.14 Pretreatment standards for existing sources. (1) Except as provided in 40 CFR 403.7 and 403.13, any existing source subject to this subchapter that introduces pollutants into a POTW shall comply with 40 CFR Part 403 and achieve the following pretreatment standards for e…

NR 255.15 Pretreatment standards for new sources. (1) Except as provided in 40 CFR 403.7, any new source subject to this subchapter that introduces pollutants into a POTW shall comply with 40 CFR Part 403 and achieve the following pretreatment standards for new sources: Table 35 …

NR 255.20 Applicability; description of the calcium subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from manufacturing calcium anode batteries. POLLUTANT OR POLLUTANT PROPERTY MAXIMUM FOR ANY…

NR 255.23 New source performance standards. There may be no discharge allowance for process wastewater pollutants from any battery manufacturing new source subject to this subchapter. History: Cr. Register, November, 1987, No. 383, eff. 12-1-87.

NR 255.25 Pretreatment standards for new sources. There may be no discharge allowance for process wastewater pollutants into a POTW from any battery manufacturing new source subject to this subchapter. History: Cr. Register, November, 1987, No. 383, eff. 12-1-87. 8 1 POLLUTANT OR…

NR 255.30 Applicability; description of the lead subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from manufacturing lead anode batteries. History: Cr. Register, November, 1987, No. 383, eff. …

NR 255.31 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. (1) Except as provided in 40 CFR 125.30 to 125.32, any existing source subject to this subchapter shall achie…

NR 255.32 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. (1) Except as provided in 40 CFR 125.30 to 125.32, any existing source subject to this subchapter shall achieve the…

NR 255.33 New source performance standards. (1) The discharge of wastewater pollutants from any new source subject to this subchapter may not exceed the following standards: Table 63 Open Formation — Dehydrated NSPS Metric units — mg/kg of lead used English units — lb/million lbs…

NR 255.34 Pretreatment standards for existing sources. (1) Except as provided in 40 CFR 403.7 and 403.13, POLLUTANT OR POLLUTANT PROPERTY MAXIMUM FOR ANY 1 DAY Copper Lead Metric units — mg/kg of lead used English units — lb/million lbs of lead used 0.011 0.006 0.002 0.001 any ex…

NR 255.35 Pretreatment standards for new sources. (1) Except as provided in 40 CFR 403.7, any new source subject to this subchapter that introduces pollutants into a POTW shall comply with 40 CFR Part 403 and achieve the following pretreatment standards for new sources: NR 255.40…

NR 255.40 Applicability; description of the Leclanche subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of the chapter was last published. WISCONSIN ADMINISTRATIVE CODE NR 255.40 pollutants into POTWs from manufacturin…

NR 255.43 New source performance standards. (1) The discharge of wastewater pollutants from any new source subject to this subchapter may not exceed the following standards: Table 90 Foliar Battery Miscellaneous Wash NSPS POLLUTANT OR POLLUTANT PROPERTY MAXIMUM FOR ANY 1 DAY Merc…

NR 255.44 Pretreatment standards for existing sources. (1) Except as provided in 40 CFR 403.7 and 403.13, any existing source subject to this subchapter that introduces pollutants into a POTW shall comply with 40 CFR Part 403 and achieve the following pretreatment standards for e…

NR 255.45 Pretreatment standards for new sources. (1) Except as provided in 40 CFR 403.7, any new source subject to this subchapter that introduces pollutants into a POTW shall comply with 40 CFR Part 403 and achieve the following pretreatment standards for new sources: MAXIMUM F…

NR 255.50 Applicability; description of the lithium subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from manufacturing lithium anode batteries. History: Cr. Register, November, 1987, No. 383,…

NR 255.53 New source performance standards. (1) The discharge of wastewater pollutants from any new source subject to this subchapter may not exceed the following standards: Table 93 Lead Iodide Cathodes NSPS MAXIMUM FOR MONTHLY AVERAGE Metric units — mg/kg of cells produced Engl…