Wisconsin Administrative Code

NR 273.042 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall ac…

NR 273.043 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve …

NR 273.044 New source performance standards. Any new source subject to this subchapter shall achieve the following standards: Table 4-33 Precious Metals Rolling Spent Emulsions NSPS Maximum for Maximum for any 1 day monthly average Pollutant or mg/off-kg (pounds per million offpo…

NR 273.045 Pretreatment standards for existing sources. Except as provided in ss. NR 211.13 and 211.14, any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the limitations set forth in s. NR 273.043. Hist…

NR 273.046 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the limitations set forth in s. NR 273.043. Subchapter V — Refractory …

NR 273.05 Applicability; description of the refractory metals subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from refractory metals forming. History: Cr. Register, September, 1990, No. 417, …

NR 273.051 Discharge prohibitions. Any facility subject to this subchapter may not discharge process wastewater pollutants from the following sources: (1) Rolling spent neat oils and graphite based lubricants; (2) Drawing spent lubricants; (3) Extrusion spent lubricants; (4) Forg…

NR 273.052 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall ac…

NR 273.053 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve …

NR 273.054 New source performance standards. Any new source subject to this subchapter shall achieve the following standards: Table 5-35 Refractory Metals Rolling Spent Emulsions NSPS Maximum for Maximum for any 1 day monthly average Pollutant or mg/off-kg (pounds per million off…

NR 273.055 Pretreatment standards for existing sources. Except as provided in ss. NR 211.13 and 211.14, any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the limitations set forth in s. NR 273.053. Hist…

NR 273.056 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the limitations set forth in s. NR 273.053. History: Cr. Register, Sep…

NR 273.06 Applicability; description of the titanium subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from titanium forming. History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.061 Discharge prohibitions. Any facility subject to this subchapter may not discharge process wastewater pollutants from the following sources: (1) Rolling spent neat oils; (2) Drawing spent neat oils; the chapter was last published. 39 DEPARTMENT OF NATURAL RESOURCES (3) …

NR 273.062 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall ac…

NR 273.063 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve …

NR 273.064 New source performance standards. Any new source subject to this subchapter shall achieve the following standards: Table 6-35 Titanium Rolling Contact Cooling Water NSPS Maximum for Maximum for any 1 day monthly average Pollutant or mg/off-kg (pounds per million offpol…

NR 273.065 Pretreatment standards for existing sources. Except as provided in ss. NR 211.13 and 211.14, any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the limitations set forth in s. NR 273.063. Hist…

NR 273.066 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the limitations set forth in s. NR 273.063. History: Cr. Register, Sep…

NR 273.07 Applicability; description of the uranium subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from uranium forming. History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.071 Discharge prohibitions. Any facility subject to this subchapter may not discharge process wastewater pollutants from the following sources: (1) Extrusion spent lubricants; (2) Forging spent lubricants; and (3) Degreasing spent solvents. Table 7-2 Uranium Heat Treatment…

NR 273.072 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall ac…

NR 273.073 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve …

NR 273.074 New source performance standards. Any new source subject to this subchapter shall achieve the following standards: Table 7-23 Uranium Extrusion Tool Contact Cooling Water NSPS Maximum for Maximum for any 1 day monthly average Pollutant or mg/off-kg (pounds per million …

NR 273.076 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the limitations set forth in s. NR 273.073. History: Cr. Register, Sep…

NR 273.08 Applicability; description of the zinc subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from zinc forming. History: Cr. Register, September, 1990, No. 417, eff. 10-1-90.

NR 273.081 Discharge prohibitions. Any facility subject to this subchapter may not discharge process wastewater pollutants from the following sources: (1) Rolling spent neat oils; (2) Stationary casting contact cooling water; and (3) Degreasing spent solvents. History: Cr. Regist…

NR 273.082 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall ac…

NR 273.083 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve …

NR 273.084 New source performance standards. Any new source subject to this subchapter shall achieve the following standards: Table 8-23 Zinc Rolling Spent Emulsions NSPS Maximum for Maximum for any 1 day monthly average Pollutant or mg/off-kg (pounds per million offpollutant pro…

NR 273.086 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the limitations set forth in s. NR 273.083. History: Cr. Register, Sep…

NR 273.09 Applicability; description of the zirconium-hafnium subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from zirconium-hafnium forming. History: Cr. Register, September, 1990, No. 417, …

NR 273.091 Discharge prohibitions. (1) Any facility subject to this subchapter may not discharge process wastewater pollutants from the following sources: (a) Rolling spent neat oils; (b) Drawing spent lubricants; (c) Extrusion spent emulsions; the chapter was last published. NR …

NR 273.092 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall ac…

NR 273.093 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve …

NR 273.095 Pretreatment standards for existing sources. Except as provided in ss. NR 211.13 and 211.14, any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the limitations set forth in s. NR 273.093. Hist…

NR 273.096 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the limitations set forth in s. NR 273.093. History: Cr. Register, Sep…

NR 273.10 Applicability; description of the metal powders subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from metal powders forming. History: Cr. Register, September, 1990, No. 417, eff. 10-…

NR 273.101 Discharge prohibitions. Any facility subject to this subchapter may not discharge process wastewater pollutants from the following sources: (1) Oil-resin impregnation wastewater; (2) Sawing or grinding spent neat oils; and (3) Degreasing spent solvents. History: Cr. Re…

NR 273.102 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall ac…

NR 273.103 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve …

NR 273.105 Pretreatment standards for existing sources. Except as provided in ss. NR 211.13 and 211.14, any existing source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the limitations set forth in s. NR 273.103. Hist…

NR 273.106 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the limitations set forth in s. NR 273.103. History: Cr. Register, Sep…

NR 274.001 Purpose. The purpose of this chapter is to establish effluent limitations, performance standards, and pretreatment standards for discharges of process wastes from the nonferrous metals manufacturing point source category and its subcategories. History: Cr. Register, Ma…

NR 274.002 Applicability. This chapter applies to facilities which produce primary metals from ore concentrates and recover secondary metals from recycle wastes and which discharge or may discharge pollutants to waters of the state or which introduce or may introduce pollutants i…

NR 274.003 General definitions. In addition to the definitions set forth in ss. NR 205.03, 205.04, and 211.03, the following definitions are applicable to the terms used in this chapter: (1) XExisting sourceY means any point source, except a new source as defined in sub. (2), fro…

NR 274.004 Compliance dates. (1) Any existing source subject to this chapter which discharges to waters of the state shall achieve: (a) The effluent limitations representing BPT by July 1, 1977; and (b) The effluent limitations representing BAT by July 1, 1984. (2) Any new source…