Wisconsin Administrative Code

NR 463.13 Emission standards for affected sources and emission units. (1) SUMMARY. The owner or operator of a new or existing affected source shall comply with each applicable limit in this section. The following table summarizes the emission standards for each type of source: th…

NR 463.14 Operating requirements. (1) SUMMARY. (a) On and after the compliance date established by s. NR 463.115, the owner or operator shall operate all new and existing affected sources and control equipment according to the requirements in this section. (b) The owner or operat…

NR 463.15 Monitoring requirements. (1) SUMMARY. On and after the compliance date established by s. NR 463.115, the owner or operator of a new or existing affected source or emission unit shall monitor all control equipment and processes according to the requirements in this secti…

NR 463.16 Performance test and compliance demonstration general requirements. (1) SITE-SPECIFIC TEST PLAN. Prior to conducting any performance test required by this subchapter, the owner or operator shall prepare a site-specific test plan which satisfies all of the requirements o…

NR 463.163 Performance test and compliance demonstration requirements and procedures. (1) ALUMINUM SCRAP SHREDDER. The owner or operator shall conduct performance tests to measure PM emissions at the outlet of the control system. If visible emission observations is the selected m…

NR 463.166 Equations for determining compliance. (1) THC EMISSION LIMIT. The owner or operator of an emission unit subject to a THC emission limit shall use Equation 6 to determine compliance with the THC emission limit in s. NR 463.13: E= C MW Q K1 K 2 M V P 10 6 (Equation…

NR 463.17 Notifications. (1) INITIAL NOTIFICATIONS. The owner or operator shall submit initial notifications to the department as described in pars. (a) to (g). (a) As required by s. NR 460.08 (2) (a), the owner or operator shall provide notification for an area source that subse…

NR 463.18 Reports. (1) STARTUP, SHUTDOWN AND MALFUNCTION PLAN AND REPORTS. The owner or operator shall develop a written plan as described in s. NR 460.05 (4) (c) that contains specific procedures to be followed for operating and maintaining the source during periods of startup, …

NR 463.19 Records. (1) (a) The owner or operator shall maintain files of all information, including all reports and notifications, required by s. NR 460.09 (2) and this subchapter. (b) The owner or operator shall retain each record for at least 5 years following the date of each …

NR 463.20 Applicability of general provisions. The requirements of the general provisions in ch. NR 460 that are applicable to the owner or operator subject to the requirements of this subchapter are shown in ch. NR 460 Appendix RRR. Subchapter III — Iron and Steel Foundries NR 4…

NR 463.22 What definitions apply to this subchapter? For terms not defined in this section, the definitions contained in chs. NR 400 and 460 apply to the terms in this subchapter, with definitions in ch. NR 460 taking precedence over definitions in ch. NR 400. If this section def…

NR 463.23 Emissions limitations, work practice standards and operation and maintenance requirements. (1) WHAT EMISSION LIMITS MUST I MEET? (a) You shall meet each of the following emission limits or standards that applies to you: 1. For each electric arc metal melting furnace, el…

NR 463.24 General compliance requirements. (1) WHAT ARE MY GENERAL REQUIREMENTS FOR COMPLYING WITH THIS SUBCHAPTER? (a) You shall be in compliance with the emissions limitations, work practice standards and operation and the chapter was last published. 49 DEPARTMENT OF NATURAL RE…

NR 463.25 Initial compliance requirements. (1) BY WHAT DATE MUST I CONDUCT INITIAL PERFORMANCE TESTS OR OTHER INITIAL COMPLIANCE DEMONSTRATIONS? (a) As required by s. NR 460.06 (1) (b), you shall conduct a performance test no later than 180 calendar days after the compliance date…

NR 463.26 Continuous compliance requirements. (1) WHAT ARE MY MONITORING REQUIREMENTS? (a) For each capture system subject to an operating limit in s. NR 463.23 (1) (b) 1., you shall install, operate and maintain a CPMS according to the requirements in sub. (2) (a) and both of th…

NR 463.27 Notifications, reports and records. (1) WHAT NOTIFICATIONS MUST I SUBMIT AND WHEN? (a) You shall submit all of the notifications to the department required by ss. NR 460.05 (6) (c) and (d), 460.06 (2), 460.07 (5) (b) and (6) (c) and (e), and 460.08 (2) to (8) that apply…

NR 464.01 Applicability; purpose. (1) APPLICABILITY. (a) The provisions of this chapter apply to the owner or operator of processes that produce pulp, paper or paperboard; that are located at a plant site that is a major source as defined in s. NR 460.02 (24) and that use the any…

NR 464.02 Definitions. For terms not defined in this section, the definitions contained in chs. NR 400 and 460 apply to the terms used in this chapter, with definitions in ch. NR 460 taking priority over definitions in ch. NR 400. In addition, the definitions in this section appl…

NR 464.03 Standards for the pulping system at kraft, soda and semi-chemical processes. (1) The owner or operator of each pulping system using the kraft process subject to the requirements of this chapter shall control the total HAP emissions from the following equipment systems, …

NR 464.04 Standards for the pulping system at sulfite processes. (1) The owner or operator of each sulfite process subject to the requirements of this chapter shall control the total HAP emissions from the following equipment systems as specified in subs. (2) and (3): (a) At exis…

NR 464.05 Standards for the bleaching system. (1) Each bleaching system that does not use any chlorine or chlorinated compounds for bleaching is exempt from the requirements of this section. Owners or operators of the following bleaching systems shall meet all the provisions of t…

NR 464.06 Standards for kraft pulping process condensates. (1) The requirements of this section apply to owners or operators of kraft processes subject to the requirements of this chapter. (2) The pulping process condensates from the following equipment systems shall be treated t…

NR 464.07 Clean condensate alternative. As an alternative to the requirements specified in s. NR 464.03 (1) (a) 2. to 5. for the control of HAP emissions from pulping systems using the kraft process, an owner or operator shall demonstrate to the satisfaction of the department, by…

NR 464.08 Standards for enclosures and closedvent systems. (1) Each enclosure and closed-vent system specified in ss. NR 464.03 (3), 464.04 (2) and 464.05 (2) for capturing and transporting vent streams that contain HAP shall meet the requirements specified in subs. (2) to (4). (…

NR 464.09 Monitoring requirements. (1) Each owner or operator subject to the standards specified in s. NR 464.03 (3) and (4), 464.04 (2) and (3), 464.05 (2) and (3), 464.06 (3), (4) and (5), 464.07 (2) or 464.08 (4), shall install, calibrate, certify, operate and maintain accordi…

NR 464.10 Recordkeeping requirements. (1) The owner or operator of each affected source subject to the requirements of this chapter shall comply with the applicable recordkeeping requirements of ch. NR 460 and the requirements specified in subs. (2) to (6) for the monitoring para…

NR 464.11 Reporting requirements. (1) Each owner or operator of a source subject to this chapter shall comply with the reporting requirements of ch. NR 460 as specified in Appendix S of ch. NR 460 and all the following requirements in this section. The initial notification report…

NR 465.01 Applicability; purpose. (1) APPLICABILITY. (a) This subchapter applies to each facility that is engaged, either in part or in whole, in the manufacture of wood furniture or wood furniture components and that is located at a plant site that is a major source of hazardous…

NR 465.02 Definitions. For terms not defined in this section, the definitions contained in chs. NR 400 and 460 apply to the terms used in this subchapter, with definitions in ch. NR 460 taking priority over definitions in ch. NR 400. If this section defines a term which is also d…

NR 465.03 Symbols. The symbols used in this subchapter have the following meanings: (1) XacY means after the control system is installed and operated. (2) XAkY is the area of each natural draft opening k in a total enclosure, in square meters. (3) XbcY means before control. (4) X…

NR 465.04 Emission limits. (1) The owner or operator of an existing affected source shall do all of the following: (a) Limit VHAP emissions from finishing operations to no more than the emission limitations for existing sources presented in Table 2 in this subchapter, using any o…

NR 465.05 Work practice standards. (1) WORK PRACTICE IMPLEMENTATION PLAN. The owner or operator of an affected source shall prepare and maintain a written work practice implementation plan that defines environmentally desirable work practices for each wood furniture manufacturing…

NR 465.055 Compliance dates. NR 465.06 Compliance methods and procedures. NR 465.07 Initial compliance demonstration. NR 465.08 Continuous compliance demonstration. NR 465.09 Performance test methods. NR 465.10 Recordkeeping requirements.

NR 465.06 Compliance methods and procedures. (1) EXISTING SOURCES. (a) Finishing materials. The owner or operator of an existing affected source shall comply with s. NR 465.04 (1) (a) by using any of the following methods: 1. Calculate the average VHAP content for all finishing m…

NR 465.07 Initial compliance demonstration. (1) FINISHING MATERIALS. The owner or operator of an affected source subject to the provisions of s. NR 465.04 (1) (a) or (2) (a) shall demonstrate initial compliance according to the following procedures as appropriate: (a) If complyin…

NR 465.08 Continuous compliance demonstration. (1) FINISHING MATERIALS. The owner or operator of an affected source subject to the provisions of s. NR 465.04 (1) (a) or (2) (a) shall demonstrate continuous compliance according to the following procedures as appropriate: (a) If co…

NR 465.09 Performance test methods. (1) (a) Except as provided in par. (c), the owner or operator of an affected source shall use Method 311 in 40 CFR part 63, Appendix A, incorporated by reference in s. NR 484.04 (25), in conjunction with formulation data, to determine the VHAP …

NR 465.10 Recordkeeping requirements. (1) The owner or operator of an affected source shall fulfill all recordkeeping requirements of s. NR 460.09 according to the applicability criteria in s. NR 465.01 (1) (e). (2) The owner or operator of an affected source subject to the emiss…

NR 465.105 Reporting requirements. Subchapter III — Surface Coating of Large Appliances NR 465.21 What this subchapter covers. NR 465.22 Definitions that apply to this subchapter. NR 465.23 Emission limitations. NR 465.24 General compliance requirements. NR 465.25 Notifications, …

NR 465.22 Definitions that apply to this subchapter. For terms not defined in this section, the definitions contained in chs. NR 400 and 460 apply to the terms in this subchapter, with definitions in ch. NR 460 taking priority over definitions in ch. NR 400. If this section defin…

NR 465.24 General compliance requirements. (1) WHAT ARE MY GENERAL REQUIREMENTS FOR COMPLYING WITH THIS SUBCHAPTER?. (a) You shall be in compliance with the emission limitations in this subchapter according to both of the following requirements: 1. Any coating operation or operat…

NR 465.25 Notifications, reports and records. (1) WHAT NOTIFICATIONS MUST I SUBMIT?. (a) You shall submit notifications according to ss. NR 460.06 (2), 460.07 (6) (c) and 460.08 (2) to (5) and (8), except as follows: 1. You shall submit the initial notification required by s. NR …

NR 465.26 Compliance requirements for the compliant material option. (1) BY WHAT DATE MUST I CONDUCT THE INITIAL COMPLIANCE DEMONSTRATION?. You shall complete the initial compliance demonstration for the initial compliance period according to the requirements in sub. (2). The ini…

NR 465.27 Compliance requirements for the emission rate without add-on controls option. (1) BY WHAT DATE MUST I CONDUCT THE INITIAL COMPLIANCE DEMONSTRATION?. You shall complete the initial compliance demonstration for the initial compliance period according to the requirements o…

NR 465.28 Compliance requirements for the emission rate with add-on controls option. (1) BY WHAT DATE MUST I CONDUCT PERFORMANCE TESTS AND OTHER INITIAL COMPLIANCE DEMONSTRATIONS?. (a) Existing affected sources. For an existing affected source, you shall do all of the following: …

NR 465.32 Definitions that apply to this subchapter. For terms not defined in this section, the definitions contained in chs. NR 400 and 460 apply to the terms in this subchapter, with definitions in ch. NR 460 taking precedence over definitions in ch. NR 400. If this section def…

NR 465.33 Emission limits. (1) WHAT EMISSION LIMITS MUST I MEET? (a) For a new or reconstructed affected source, you shall limit organic HAP emissions to the atmosphere from the affected source to the applicable limit specified in subds. 1. to 4., except as specified in par. (c),…