FAA to Airbus Pilots: Check Those Landing Gears Extra Hard
Published Date: 2/4/2025
Rule
Summary
If you fly or fix Airbus A300-600 series planes, listen up! The FAA is updating safety checks on the main landing gear to include more planes and keep everyone safe. Starting March 11, 2025, these inspections and fixes must happen to avoid costly repairs or delays.
Analyzed Economic Effects
4 provisions identified: 1 benefits, 3 costs, 0 mixed.
Potential Major Repair Costs If Cracked
If a crack is found, the FAA estimates on-condition repair labor could be up to 1,500 work-hours (at $85/hour = $127,500) plus up to $620,000 in parts, for a total up to $747,500 per airplane. Any detected crack must be repaired before further flight using an FAA-, EASA-, or Airbus-DOA-approved method.
Required Inspections for A300-600 Main Gear
If you operate or maintain certain Airbus A300-600 series airplanes, you must perform a one-time detailed inspection (DET) of the main landing gear support rib 5 lower flange and, if needed, a fluorescent penetrant inspection (FPI), following EASA AD 2024-0145. These inspection requirements continue the work from AD 2022-11-01 and the AD is effective March 11, 2025.
Estimated Inspection Cost Per Airplane
The FAA estimates the inspection required by this AD will take 23 work-hours at $85 per hour, costing $1,955 per airplane in labor (parts $0). The FAA estimates this AD affects 124 U.S.-registered airplanes, with a total estimated cost to U.S. operators of $242,420.
Certain A300 B2 Models Removed From AD
The FAA updated Type Certificate A35EU to remove Airbus A300 B2-1A, B2-1C, B2K-3C, and B2-203 models and removed those airplanes from the applicability of the AD. Owners of those specific B2 models therefore are not subject to this AD's inspection and repair requirements.
Personalized for You
How does this regulation affect your finances?
Personalize government policy and PRIA will tell you what this federal register document means for your household, plus every other regulation we track. PRIA reads each provision against your financial profile to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-15585, Requirements for Interference-Tolerant Radio Altimeter Systems
In July 2025, President Trump signed the One Big Beautiful Bill Act. Section 40002 of that law re-institutes the Federal Communications Commission's general auction authority and specifically directs the Commission to complete a system of competitive bidding for not less than 100 megahertz in the 3.98-4.2 gigahertz band (Upper C- band). This final rule supports the Federal Communications Commission's July 2026 Report and Order that makes 160 megahertz of the Upper C-band available for terrestrial wireless flexible use via a system of competitive bidding. To ensure safe, efficient, and reliable aviation operations in the presence of wireless signals in the C-band, the Federal Aviation Administration is issuing new regulations that require all radio altimeters to meet specific minimum performance requirements. These new radio altimeters must withstand interference from wireless signals in neighboring spectrum bands and continue to provide accurate altitude readings to both pilots and integrated aircraft safety systems. These regulations require all aircraft equipped with radio altimeters operating under part 121 and those aircraft with radio altimeters operating under part 129 with 30 or more passenger seats or a payload capacity of more than 7,500 pounds to comply with the minimum performance requirements by December 30, 2030, which is prior to the date the Federal Communications Commission authorizes the use of the Upper C-band for new wireless services, as stated in its Report and Order. All other aircraft equipped with radio altimeters that are required to comply with part 91, including aircraft operating under parts 125, 133, 135, 136, 137, 194, and all other aircraft operating under part 129 that are not subject to the initial deadline, must comply with the same minimum performance requirements on or before October 31, 2034.
2026-13440, Enabling Supersonic Overland Flight
The FAA wants to let supersonic planes fly over land again by updating old rules that banned them because of loud sonic booms. Thanks to new tech that keeps booms quiet, this change will open the door for faster, cooler flights across the U.S., helping America lead the world in supersonic travel. People and companies interested in supersonic flight should share their thoughts by August 17, 2026.
2026-13126, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility; Extension of Comment Period
The FAA is giving more time—until August 5, 2026—for people to share their thoughts on new rules that would limit drone flights near important fixed sites like power plants or airports. This affects drone operators and facility owners who want to keep the skies safe and secure. No new costs yet, just extra time to weigh in and help shape the rules.
2026-08943, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility
The FAA is proposing new rules to keep drones away from certain important fixed sites like power plants or airports to keep everyone safe and secure. If you own or operate one of these sites, you can request a drone flight restriction zone to protect your property and people nearby. Comments are open until July 6, 2026, and these changes could affect drone pilots and site operators, but no big costs are expected.
2025-04846, Extension of the Prohibition Against Certain Flights in the Territory and Airspace of Libya
The FAA is extending the ban on certain flights over Libya for three more years, until March 20, 2028. This affects U.S. airlines, commercial operators, and pilots with FAA certificates flying in Libyan airspace, due to ongoing safety risks. The rule also reminds everyone how to apply for special approvals or exemptions if needed.
2025-03853, Enforcement Policy Regarding “Drug and Alcohol Testing of Certificated Repair Station Employees Located Outside of the United States; Correction”
The FAA is giving repair stations outside the U.S. a break by delaying enforcement of new drug and alcohol testing rules until March 20, 2025. This means affected repair stations don’t have to worry about penalties if they aren’t fully following the updated rules just yet. The delay helps everyone get ready without rushing or extra costs.
Previous / Next Documents
Previous: 2025-02144, Airworthiness Directives; Embraer S.A. (Type Certificate Previously Held by Yaborã Indústria Aeronáutica S.A.; Embraer S.A.; Empresa Brasileira de Aeronáutica S.A. (EMBRAER)) Airplanes
The FAA is requiring inspections and possible fixes on certain Embraer EMB-135 and EMB-145 airplanes because some parts in the middle of the plane’s body might get weak from loose bolts. These checks must start by March 11, 2025, to keep the planes safe and strong. Airlines will need to inspect regularly and report what they find, which could mean some repair costs but keeps everyone flying safely.
Next: 2025-02146, Airworthiness Directives; The Boeing Company Airplanes
If you fly or work with Boeing 767 planes, listen up! The FAA is updating safety rules to keep the Captain’s and First Officer’s seats from moving on their own, which could be dangerous. Starting March 11, 2025, airlines must inspect more seat parts and keep checking them regularly, helping avoid costly problems and keep flights safe.