2025-07275RuleWallet

FAA to Bell 430 owners: Swap those rotors sooner or else!

Published Date: 4/28/2025

Rule

Summary

If you own certain Bell Textron Canada Model 430 helicopters, new safety rules are here! The FAA is updating inspections and shortening how long some rotor parts can be used before they must be replaced. These changes start May 13, 2025, and could mean some extra maintenance costs but keep your helicopter flying safe and sound.

Analyzed Economic Effects

6 provisions identified: 2 benefits, 4 costs, 0 mixed.

Effective date and short compliance deadline

The AD is effective May 13, 2025, and required actions must be completed within 50 hours time-in-service or 60 days, whichever occurs first, after the effective date. The FAA made the rule effective with less than 30 days' notice due to safety risk.

Required inspections and part-life reductions

You must follow Transport Canada AD CF-2024-40 (incorporated by reference) to review records, perform detailed visual inspections of pitch link tube assemblies, rod ends, universal bearings, and main rotor (M/R) clevises, perform purge grease and magnetic particle inspections (MPI) after each detailed visual inspection, and replace components that exceed their life limits or fail inspection. The AD also reduces life limits on individual components and requires re-identifying certain M/R pitch link assemblies.

FAA cost estimates for compliance

The FAA estimates the rule affects 29 U.S. helicopters and uses a labor rate of $85 per hour. Estimated per-action costs include: record review $22 (.25 hr), detailed inspections $340 (4 hrs) each, MPI $170 (2 hrs), and re-identify $22 (.25 hr). The FAA also lists on-condition parts costs such as replacing a universal bearing $3,906, a pitch link tube or rod end assembly $6,803, an M/R clevis $772, and a universal to pitch link bolt $714.

Which helicopters are affected

This rule applies only to Bell Textron Canada Limited Model 430 helicopters with serial numbers 49001 through 49129 inclusive. The FAA estimates this AD affects 29 helicopters on the U.S. registry.

Special flight permits allowed to reach maintenance

You may obtain a special flight permit under 14 CFR 21.197 and 21.199 to fly the helicopter to a maintenance area to perform the AD actions, provided there are no passengers onboard.

No FAA reporting requirement to manufacturer

Although Transport Canada AD CF-2024-40 specifies submitting certain information to the manufacturer, this FAA AD explicitly does not require operators to submit those reports to the manufacturer.

Personalized for You

How does this regulation affect your finances?

Personalize government policy and PRIA will tell you what this federal register document means for your household, plus every other regulation we track. PRIA reads each provision against your financial profile to show you exactly what matters to your wallet.

Key Dates

Published Date
Rule Effective
4/28/2025
5/13/2025

Department and Agencies

Department
Independent Agency
Agency
Transportation Department
Federal Aviation Administration
Source: View HTML

Related Federal Register Documents

Previous / Next Documents

Back to Federal Register