FAA Orders Airbus Landing-Gear Parts Replaced After Damage Was Found
Published Date: 6/6/2025
Rule
Summary
If you fly or fix Airbus A350-941 planes, listen up! The FAA found damage on key landing gear parts and now requires those parts to be replaced and banned from reuse starting July 11, 2025. This keeps flights safe but means airlines will spend some money swapping out these parts soon.
Analyzed Economic Effects
3 provisions identified: 1 benefits, 2 costs, 0 mixed.
Prevents possible landing gear collapse
The FAA found anodic burns on certain MLG bogie beam axles after a high velocity oxygen-fuel stripping process; if not corrected the condition could lead to structural failure of the main landing gear and possible collapse, damage to the airplane, and injury to occupants. The AD requires replacements and installation prohibitions to address that unsafe condition effective July 11, 2025.
Mandatory axle replacements for A350-941
If you operate or maintain Airbus A350-941 airplanes, you must replace affected main landing gear (MLG) bogie beam axles (part number 55-3575047-00, specific serial numbers listed in EASA AD 2024-0156) and you may not install affected parts starting July 11, 2025. The replacement must be done within 24,000 flight hours or 5,700 flight cycles since first installation of the affected part, or within 12 months after July 11, 2025, whichever occurs later.
Estimated labor cost and U.S. fleet impact
The FAA estimates this AD affects 36 U.S.-registered A350-941 airplanes. Labor is estimated up to 48 work hours at $85 per hour (up to $4,080 per airplane) and the FAA estimates total labor cost to U.S. operators up to $146,880; parts costs are unknown and on-condition repair costs for bogie beam bushes were not estimated.
Personalized for You
How does this regulation affect your finances?
Personalize government policy and PRIA will tell you what this federal register document means for your household, plus every other regulation we track. PRIA reads each provision against your financial profile to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-15585, Requirements for Interference-Tolerant Radio Altimeter Systems
In July 2025, President Trump signed the One Big Beautiful Bill Act. Section 40002 of that law re-institutes the Federal Communications Commission's general auction authority and specifically directs the Commission to complete a system of competitive bidding for not less than 100 megahertz in the 3.98-4.2 gigahertz band (Upper C- band). This final rule supports the Federal Communications Commission's July 2026 Report and Order that makes 160 megahertz of the Upper C-band available for terrestrial wireless flexible use via a system of competitive bidding. To ensure safe, efficient, and reliable aviation operations in the presence of wireless signals in the C-band, the Federal Aviation Administration is issuing new regulations that require all radio altimeters to meet specific minimum performance requirements. These new radio altimeters must withstand interference from wireless signals in neighboring spectrum bands and continue to provide accurate altitude readings to both pilots and integrated aircraft safety systems. These regulations require all aircraft equipped with radio altimeters operating under part 121 and those aircraft with radio altimeters operating under part 129 with 30 or more passenger seats or a payload capacity of more than 7,500 pounds to comply with the minimum performance requirements by December 30, 2030, which is prior to the date the Federal Communications Commission authorizes the use of the Upper C-band for new wireless services, as stated in its Report and Order. All other aircraft equipped with radio altimeters that are required to comply with part 91, including aircraft operating under parts 125, 133, 135, 136, 137, 194, and all other aircraft operating under part 129 that are not subject to the initial deadline, must comply with the same minimum performance requirements on or before October 31, 2034.
2026-13440, Enabling Supersonic Overland Flight
The FAA wants to let supersonic planes fly over land again by updating old rules that banned them because of loud sonic booms. Thanks to new tech that keeps booms quiet, this change will open the door for faster, cooler flights across the U.S., helping America lead the world in supersonic travel. People and companies interested in supersonic flight should share their thoughts by August 17, 2026.
2026-13126, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility; Extension of Comment Period
The FAA is giving more time—until August 5, 2026—for people to share their thoughts on new rules that would limit drone flights near important fixed sites like power plants or airports. This affects drone operators and facility owners who want to keep the skies safe and secure. No new costs yet, just extra time to weigh in and help shape the rules.
2026-08943, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility
The FAA is proposing new rules to keep drones away from certain important fixed sites like power plants or airports to keep everyone safe and secure. If you own or operate one of these sites, you can request a drone flight restriction zone to protect your property and people nearby. Comments are open until July 6, 2026, and these changes could affect drone pilots and site operators, but no big costs are expected.
2025-04846, Extension of the Prohibition Against Certain Flights in the Territory and Airspace of Libya
The FAA is extending the ban on certain flights over Libya for three more years, until March 20, 2028. This affects U.S. airlines, commercial operators, and pilots with FAA certificates flying in Libyan airspace, due to ongoing safety risks. The rule also reminds everyone how to apply for special approvals or exemptions if needed.
2025-03853, Enforcement Policy Regarding “Drug and Alcohol Testing of Certificated Repair Station Employees Located Outside of the United States; Correction”
The FAA is giving repair stations outside the U.S. a break by delaying enforcement of new drug and alcohol testing rules until March 20, 2025. This means affected repair stations don’t have to worry about penalties if they aren’t fully following the updated rules just yet. The delay helps everyone get ready without rushing or extra costs.
Previous / Next Documents
Previous: 2025-10318, Airworthiness Directives; Israel Aircraft Industries Ltd. Airplanes
If you fly Israel Aircraft Industries Model 1124 or 1124A planes, listen up! The FAA says you need to update your flight manuals by June 23, 2025, to keep the thrust reverser system safe and avoid it accidentally activating during flight or landing. This change helps keep everyone safe and doesn’t mention any big costs, but you’ve got until July 21, 2025, to share your thoughts with the FAA.
Next: 2025-10320, Airworthiness Directives; Textron Aviation, Inc. (Type Certificate Previously Held by Cessna Aircraft Company) Airplanes
If you own or operate Textron Aviation Model 560 or 560XL airplanes, listen up! The FAA found some fire extinguisher bottles were wired wrong, so they’re requiring tests, inspections, and fixes to keep everyone safe. Starting July 11, 2025, you’ll also need to update your inspection schedule to check these fire systems regularly—better safe than sorry, and it might cost some time and money to get it done right.