Airbus A320neo Planes Face Fastener Hole Safety Inspections
Published Date: 11/21/2025
Proposed Rule
Summary
The FAA wants Airbus A320 planes checked because some parts might not be made quite right, which could cause safety issues. They’re asking airlines to inspect certain fastener holes and fix any problems found. Comments are open until January 5, 2026, and these checks might cost some time and money but keep flights safe and sound.
Analyzed Economic Effects
3 provisions identified: 0 benefits, 3 costs, 0 mixed.
Required Inspections on Airbus A320s
The FAA proposes an airworthiness directive requiring inspections of fastener holes on certain Airbus A320-251N/252N/253N/271N/272N/273N airplanes for nominal diameter and applicable corrective actions (including rototest inspections and repairs). If any cracking is found, the AD requires that the cracking be repaired before further flight using an FAA-, EASA-, or DOA-approved method.
Estimated Inspection Cost Per Airplane
The FAA estimates the required inspection will take 27 work-hours at $85 per hour, a labor cost of $2,295 per airplane and $0 parts cost. The FAA estimates the proposed AD would affect 224 U.S.-registered airplanes for a total estimated cost on U.S. operators of $514,080.
On‑Condition Repair Labor Cost
If on-condition actions are needed (for example, rototest inspections that find cracking), the FAA estimates 20 work-hours at $85 per hour, a labor cost of $1,700 per affected airplane and $0 parts cost. These on-condition costs would apply each time cracking or other discrepancies require the specified corrective actions.
Personalized for You
How does this regulation affect your finances?
Personalize government policy and PRIA will tell you what this federal register document means for your household, plus every other regulation we track. PRIA reads each provision against your financial profile to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-13440, Enabling Supersonic Overland Flight
The FAA wants to let supersonic planes fly over land again by updating old rules that banned them because of loud sonic booms. Thanks to new tech that keeps booms quiet, this change will open the door for faster, cooler flights across the U.S., helping America lead the world in supersonic travel. People and companies interested in supersonic flight should share their thoughts by August 17, 2026.
2026-13126, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility; Extension of Comment Period
The FAA is giving more time—until August 5, 2026—for people to share their thoughts on new rules that would limit drone flights near important fixed sites like power plants or airports. This affects drone operators and facility owners who want to keep the skies safe and secure. No new costs yet, just extra time to weigh in and help shape the rules.
2026-08943, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility
The FAA is proposing new rules to keep drones away from certain important fixed sites like power plants or airports to keep everyone safe and secure. If you own or operate one of these sites, you can request a drone flight restriction zone to protect your property and people nearby. Comments are open until July 6, 2026, and these changes could affect drone pilots and site operators, but no big costs are expected.
2026-16803, Notice of Availability, Notice of Public Comment Period and Request for Comment on the Draft Environmental Assessment for Reditus Space ENOS Reentries in the Gulf of America
In accordance with the National Environmental Policy Act of 1969, as amended (NEPA) and FAA Order 1050.1G, FAA National Environmental Policy Act Implementing Procedures, the FAA is announcing the availability of and requesting comment on the Draft Environmental Assessment for Reditus Space ENOS Reentries in the Gulf of America (Draft EA).
2026-16795, Airworthiness Directives; The Boeing Company Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 737 -300, -400, and -500 series airplanes. This proposed AD was prompted by reports of nuisance stick shaker activation while accelerating to cruise speed at the top of a climb due to frozen angle of airflow (AOA) sensor vanes. This proposed AD would require installing new external case heaters (ECHs) on the left and right AOA sensors, performing repetitive functional tests and applicable corrective actions, and accomplishing applicable concurrent actions. The FAA is proposing this AD to address the unsafe condition on these products.
2026-16804, Establishment of Class E Airspace; Trading Bay Production Airport, Trading Bay, AK
This action proposes to establish Class E airspace extending upward from 700 feet above the surface at Trading Bay Production Airport, Trading Bay, AK. This action would support the safety and management of instrument flight rules (IFR) operations at the airport.
Previous / Next Documents
Previous: 2025-20561, Exempting Whole Health Well-Being Services From Copayment
The VA planned to stop charging copayments for Whole Health well-being services to make them easier for veterans to use. But now, they’ve decided to pause and rethink this plan, so no changes or savings will happen yet. Veterans should keep an eye out for future updates if the VA revisits this idea.
Next: 2025-20595, Amendment of Class E Airspace; New Lexington, OH
The FAA wants to update the Class E airspace around Ed Newlon Field in New Lexington, OH, to match new flight rules after a nearby navigation system was turned off. This change helps pilots fly safely using instruments and updates the airport’s official location info. If you have thoughts, speak up by January 5, 2026—no costs or delays expected for travelers or pilots.