Airworthiness Directives; Airbus SAS Airplanes
Published Date: 11/25/2025
Rule
Summary
The FAA is requiring all Airbus A319, A320, and A321 planes with sharklets to get regular checks for cracks in the lower wing cover after tests found potential problems. These inspections start December 30, 2025, to keep flights safe and avoid costly repairs later. If issues pop up, fixes must be done quickly to keep the planes flying strong.
Analyzed Economic Effects
4 provisions identified: 1 benefits, 3 costs, 0 mixed.
Mandatory inspections for Airbus A320-family
If you operate Airbus A319, A320, or A321 airplanes with sharklets, you must start repetitive inspections for cracking in the lower wing cover beginning December 30, 2025. The inspections follow EASA AD 2024-0201R1 and cover the bottom wing area between rib 19 and rib 21, forward of stringer 8, on both left and right sides.
Estimated inspection cost per airplane
The FAA estimates each required inspection takes 6 work-hours at $85 per hour, costing $510 per airplane. The FAA estimates the total first-round cost on U.S. operators is $981,240 for the 1,924 affected U.S.-registered airplanes.
Repairs required before further flight
If an inspection finds a discrepancy, the airplane must be repaired before further flight using a method approved by the FAA, EASA, or Airbus's EASA Design Organization Approval. Approved repairs must include the DOA-authorized signature if approved by the DOA.
Less mandatory paperwork for clean inspections
The FAA removed a proposed requirement to submit an inspection report when no discrepancy is found. You do not have to file a specific inspection report to Airbus or the FAA if inspections find no cracks.
Personalized for You
How does this regulation affect your finances?
Personalize government policy and PRIA will tell you what this federal register document means for your household, plus every other regulation we track. PRIA reads each provision against your financial profile to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-13440, Enabling Supersonic Overland Flight
The FAA wants to let supersonic planes fly over land again by updating old rules that banned them because of loud sonic booms. Thanks to new tech that keeps booms quiet, this change will open the door for faster, cooler flights across the U.S., helping America lead the world in supersonic travel. People and companies interested in supersonic flight should share their thoughts by August 17, 2026.
2026-13126, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility; Extension of Comment Period
The FAA is giving more time—until August 5, 2026—for people to share their thoughts on new rules that would limit drone flights near important fixed sites like power plants or airports. This affects drone operators and facility owners who want to keep the skies safe and secure. No new costs yet, just extra time to weigh in and help shape the rules.
2026-08943, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility
The FAA is proposing new rules to keep drones away from certain important fixed sites like power plants or airports to keep everyone safe and secure. If you own or operate one of these sites, you can request a drone flight restriction zone to protect your property and people nearby. Comments are open until July 6, 2026, and these changes could affect drone pilots and site operators, but no big costs are expected.
2026-16672, Airworthiness Directives; Air Tractor, Inc. Airplanes
The FAA is superseding Airworthiness Directive (AD) 2024-16- 06, which applied to all Air Tractor, Inc. (Air Tractor) Model AT-802 and AT-802A airplanes with Wipaire, Inc. Supplemental Type Certificate (STC) No. SA01795CH installed. AD 2024-16-06 required repetitively inspecting the left and right, forward and rear, horizontal stabilizer spars for cracks, replacing any horizontal stabilizer spar found cracked or damaged, installing bathtub fittings, and reporting inspection results to the FAA. Since the FAA issued AD 2024-16-06, additional cracks in the horizontal stabilizer spars were reported where the vertical fin structural support brace mounts to the horizontal stabilizer spar. This AD retains all the actions of AD 2024- 16-06 and adds inspections to another area. The FAA is issuing this AD to address the unsafe condition on these products.
2026-16655, Airworthiness Directives; Pratt & Whitney Canada Corp. Engines
The FAA is superseding Airworthiness Directive (AD) 2026-13- 09, which applied to all Pratt & Whitney Canada Corp. (P&WC) Model PW210A, PW210A1, and PW210S engines. AD 2026-13-09 required repetitive visual inspections of the turbine exhaust frame for cracks and, depending on the results of the inspections, replacement of the turbine exhaust frame. Since the FAA issued AD 2026-13-09, a manufacturer's analysis revealed that turbine exhaust frames manufactured from a certain material were less durable and more susceptible to developing cracks under thermal stress. This AD requires repetitive visual inspections of the turbine exhaust frame for cracks at different initial inspection thresholds than required by AD 2026-13-09 based on the material used during manufacture and, depending on the results of the inspections, replacement of the turbine exhaust frame. The FAA is issuing this AD to address the unsafe condition on these products.
2026-16640, Airworthiness Directives; Airbus Helicopters
The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus Helicopters Model H160-B helicopters. This proposed AD was prompted by a determination that a gap without fire-resistant sealant (sealant) may be present in the cargo bay near the fuel segregation box. This proposed AD would require inspecting for any missing sealant and, depending on findings, corrective action. The FAA is proposing this AD to address the unsafe condition on these products.
Previous / Next Documents
Previous: 2025-20924, Airworthiness Directives; Airbus SAS Airplanes
If you fly or work with certain Airbus A350-1041 planes, listen up! The FAA is updating rules to replace old hydro-mechanical units (HMUs) with improved ones to keep flights safe. These changes kick in December 10, 2025, and could mean some maintenance costs but way better safety for everyone on board.
Next: 2025-20927, Airworthiness Directives; Airbus SAS Airplanes
If you fly or maintain certain Airbus A350 airplanes, heads up! The FAA is updating safety rules that require tougher maintenance checks to keep these planes safe. These new rules kick in December 30, 2025, and might mean some extra work but help prevent problems in the sky.