FAA Finds New Safety Problems With Popular Airbus Jets
Published Date: 11/25/2025
Rule
Summary
If you fly or maintain certain Airbus A350 airplanes, heads up! The FAA is updating safety rules that require tougher maintenance checks to keep these planes safe. These new rules kick in December 30, 2025, and might mean some extra work but help prevent problems in the sky.
Analyzed Economic Effects
3 provisions identified: 1 benefits, 2 costs, 0 mixed.
Required maintenance program revisions
If you operate certain Airbus A350-941 or -1041 airplanes (original airworthiness or export certificate issued on or before August 1, 2024), you must revise your maintenance or inspection program to incorporate the new airworthiness limitations in EASA AD 2024-0189. The AD is effective December 30, 2025, and the FAA requires revising the existing maintenance or inspection program within 90 days after that effective date.
Estimated compliance labor and cost
The FAA estimates this AD affects 34 U.S.-registered A350 airplanes and estimates labor costs per operator of $7,650 (90 work‑hours × $85/hour) for the previously retained actions and $7,650 (90 work‑hours × $85/hour) for the newly required actions.
Allowance for later ALS revisions
The FAA confirms operators may use applicable later approved revisions of the Airworthiness Limitations Section (ALS) to comply with this AD, per the EASA AD 2024-0189 reference publications policy. That provides operators flexibility to follow later-approved ALS revisions when meeting the AD requirements.
Personalized for You
How does this regulation affect your finances?
Personalize government policy and PRIA will tell you what this federal register document means for your household, plus every other regulation we track. PRIA reads each provision against your financial profile to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-13440, Enabling Supersonic Overland Flight
The FAA wants to let supersonic planes fly over land again by updating old rules that banned them because of loud sonic booms. Thanks to new tech that keeps booms quiet, this change will open the door for faster, cooler flights across the U.S., helping America lead the world in supersonic travel. People and companies interested in supersonic flight should share their thoughts by August 17, 2026.
2026-13126, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility; Extension of Comment Period
The FAA is giving more time—until August 5, 2026—for people to share their thoughts on new rules that would limit drone flights near important fixed sites like power plants or airports. This affects drone operators and facility owners who want to keep the skies safe and secure. No new costs yet, just extra time to weigh in and help shape the rules.
2026-08943, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility
The FAA is proposing new rules to keep drones away from certain important fixed sites like power plants or airports to keep everyone safe and secure. If you own or operate one of these sites, you can request a drone flight restriction zone to protect your property and people nearby. Comments are open until July 6, 2026, and these changes could affect drone pilots and site operators, but no big costs are expected.
2026-16506, Airworthiness Directives; Airbus Helicopters
The FAA is adopting a new airworthiness directive (AD) for all Airbus Helicopters Model EC 155 B and EC 155 B1 helicopters. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the airworthiness limitations section (ALS) of the existing maintenance manual (MM) or instructions for continued airworthiness (ICA) and the existing approved maintenance or inspection program, as applicable. The FAA is issuing this AD to address the unsafe condition on these products.
2026-16567, Airworthiness Directives; Airbus SAS Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus SAS Model A330-243, A330-243F, A330-341, A330-342, A330- 343, A330-841, and A330-941 airplanes; and Model A340-211, A340-212, A340-213, A340-311, A340-312, A340-313, A340-541, and A340-642 airplanes. This proposed AD was prompted by reports of leaks on closed fuel low pressure shut-off valves (LPSOVs). This proposed AD would require repetitive leak checks of certain fuel LPSOVs and replacement of an affected part if any discrepancy is detected. This proposed AD would also allow the installation of an affected part under certain conditions. The FAA is proposing this AD to address the unsafe condition on these products.
2026-16502, Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Engines
The FAA proposes to supersede Airworthiness Directive (AD) 2025-26-03, which applies to certain Rolls-Royce Deutschland Ltd & Co KG (RRD) Model Trent 1000-A, Trent 1000-AE, Trent 1000-C, Trent 1000- CE, Trent 1000-D, Trent 1000-E, Trent 1000-G, and Trent 1000-H engines. AD 2025-26-03 requires repetitive borescope inspections (BSIs) of the high-pressure compressor (HPC) rear drum cavity and cavities between each HPC rotor disc, and depending on the results of inspection, removal of the engine from service. AD 2025-26-03 also allows an alternative method of complying with the repetitive BSIs if certain actions are accomplished. Since the FAA issued AD 2025-26-03, RRD published updated service material with a revised bolting arrangement at the HPC rotor shaft to high-pressure turbine (HPT) rotor disc interface to address the unsafe condition. This proposed AD would require repetitive BSIs of the HPC rear drum cavity and cavities between each HPC rotor disc, and depending on the results of inspection, removal of the engine from service. This proposed AD would also allow an alternative method of complying with BSIs if certain actions are accomplished, and require modification of the bolting arrangement as a terminating action for the repetitive BSIs. The FAA is proposing this AD to address the unsafe condition on these products.
Previous / Next Documents
Previous: 2025-20925, Airworthiness Directives; Airbus SAS Airplanes
The FAA is requiring all Airbus A319, A320, and A321 planes with sharklets to get regular checks for cracks in the lower wing cover after tests found potential problems. These inspections start December 30, 2025, to keep flights safe and avoid costly repairs later. If issues pop up, fixes must be done quickly to keep the planes flying strong.
Next: 2025-20935, Safety Zones; Recurring Events in Captain of the Port Duluth Zone
The Coast Guard is updating safety rules for yearly events in the Duluth area of Lake Superior to keep boaters safer and better informed. They’re adding clear definitions and improving how and when safety zones are enforced, so everyone knows what’s happening and when. These changes start December 26, 2025, and help prevent accidents during busy marine events without adding extra costs.