Helicopter Tail Fixes: FAA's Crash-Prevention Plumbing Update
Published Date: 12/8/2025
Proposed Rule
Summary
If you fly Airbus Helicopters models AS332C, AS332C1, AS332L, AS332L1, or SA330J, listen up! The FAA found cracks in the tail rotor parts caused by worn-out bearings and wants to shorten how long these parts can be used before swapping them out. You’ll need to replace these bearings sooner than before to keep flying safe, and you can’t put old or unchecked bearings back on. Comments on this plan are open until January 22, 2026.
Analyzed Economic Effects
3 provisions identified: 1 benefits, 2 costs, 0 mixed.
Shorter life limits — replace tail rotor bearings
If you operate Airbus Helicopters Model AS332C, AS332C1, AS332L, AS332L1, or SA330J, the FAA proposes reduced life-limit intervals for the affected tail rotor bearing stack and would require replacing that bearing stack before it exceeds the reduced life limit. The proposed rule also prohibits installing an affected bearing stack on a helicopter unless certain requirements are met. The FAA estimates replacement would cost $1,600 per helicopter (8 work-hours at $85/hour plus $920 in parts) and estimates the rule would affect 10 U.S.-registered helicopters (total estimated cost $16,000).
Special flight permits are prohibited
Under the proposed AD, special flight permits are prohibited for the affected helicopters. That means operators cannot use special flight permits to fly aircraft that require the bearing-stack actions specified by this AD.
No parts return or reporting required
Although the related EASA AD specifies submitting certain information and returning parts to the manufacturer, the FAA's proposed AD explicitly does not require submitting that information or returning parts. Operators therefore would not be required by this FAA AD to send parts back or to submit the EASA-specified reports.
Personalized for You
How does this regulation affect your finances?
Personalize government policy and PRIA will tell you what this federal register document means for your household, plus every other regulation we track. PRIA reads each provision against your financial profile to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-15585, Requirements for Interference-Tolerant Radio Altimeter Systems
In July 2025, President Trump signed the One Big Beautiful Bill Act. Section 40002 of that law re-institutes the Federal Communications Commission's general auction authority and specifically directs the Commission to complete a system of competitive bidding for not less than 100 megahertz in the 3.98-4.2 gigahertz band (Upper C- band). This final rule supports the Federal Communications Commission's July 2026 Report and Order that makes 160 megahertz of the Upper C-band available for terrestrial wireless flexible use via a system of competitive bidding. To ensure safe, efficient, and reliable aviation operations in the presence of wireless signals in the C-band, the Federal Aviation Administration is issuing new regulations that require all radio altimeters to meet specific minimum performance requirements. These new radio altimeters must withstand interference from wireless signals in neighboring spectrum bands and continue to provide accurate altitude readings to both pilots and integrated aircraft safety systems. These regulations require all aircraft equipped with radio altimeters operating under part 121 and those aircraft with radio altimeters operating under part 129 with 30 or more passenger seats or a payload capacity of more than 7,500 pounds to comply with the minimum performance requirements by December 30, 2030, which is prior to the date the Federal Communications Commission authorizes the use of the Upper C-band for new wireless services, as stated in its Report and Order. All other aircraft equipped with radio altimeters that are required to comply with part 91, including aircraft operating under parts 125, 133, 135, 136, 137, 194, and all other aircraft operating under part 129 that are not subject to the initial deadline, must comply with the same minimum performance requirements on or before October 31, 2034.
2026-13440, Enabling Supersonic Overland Flight
The FAA wants to let supersonic planes fly over land again by updating old rules that banned them because of loud sonic booms. Thanks to new tech that keeps booms quiet, this change will open the door for faster, cooler flights across the U.S., helping America lead the world in supersonic travel. People and companies interested in supersonic flight should share their thoughts by August 17, 2026.
2026-13126, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility; Extension of Comment Period
The FAA is giving more time—until August 5, 2026—for people to share their thoughts on new rules that would limit drone flights near important fixed sites like power plants or airports. This affects drone operators and facility owners who want to keep the skies safe and secure. No new costs yet, just extra time to weigh in and help shape the rules.
2026-08943, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility
The FAA is proposing new rules to keep drones away from certain important fixed sites like power plants or airports to keep everyone safe and secure. If you own or operate one of these sites, you can request a drone flight restriction zone to protect your property and people nearby. Comments are open until July 6, 2026, and these changes could affect drone pilots and site operators, but no big costs are expected.
2025-04846, Extension of the Prohibition Against Certain Flights in the Territory and Airspace of Libya
The FAA is extending the ban on certain flights over Libya for three more years, until March 20, 2028. This affects U.S. airlines, commercial operators, and pilots with FAA certificates flying in Libyan airspace, due to ongoing safety risks. The rule also reminds everyone how to apply for special approvals or exemptions if needed.
2025-03853, Enforcement Policy Regarding “Drug and Alcohol Testing of Certificated Repair Station Employees Located Outside of the United States; Correction”
The FAA is giving repair stations outside the U.S. a break by delaying enforcement of new drug and alcohol testing rules until March 20, 2025. This means affected repair stations don’t have to worry about penalties if they aren’t fully following the updated rules just yet. The delay helps everyone get ready without rushing or extra costs.
Previous / Next Documents
Previous: 2025-22130, Incarcerated People's Communication Services; Implementation of the Martha Wright-Reed Act; Rates for Interstate Inmate Calling Services
The FCC is working on setting permanent price limits for phone and video calls for people in jail to keep costs fair and reasonable. They want to make sure facilities get paid fairly for providing these services, and they’re asking for public input by early 2026. This could affect how much families pay to stay connected and when new rules take effect.
Next: 2025-22171, Amendment of Class E Airspace; Benton Harbor, MI
The FAA wants to update the airspace rules around Southwest Michigan Regional Airport in Benton Harbor, MI, because a nearby navigation beacon was turned off. This change will help pilots fly safely using instruments and keep the airport info current. If you have thoughts, speak up by January 22, 2026—no costs or hassles for the public are expected.