FAA Tightens Rules for Dassault Falcon Jet Safety Inspections
Published Date: 5/13/2026
Rule
Summary
If you own certain Dassault Falcon jets, the FAA has updated the rules to keep your plane safer by requiring new or stricter maintenance checks. These changes kick in on June 17, 2026, and might mean a bit more work or cost to follow the new inspection schedules. The FAA wants to make sure these jets keep flying safely with these fresh safety steps.
Analyzed Economic Effects
3 provisions identified: 0 benefits, 3 costs, 0 mixed.
Mandatory maintenance program revision
If you operate certain Dassault Falcon Model FAN JET FALCON series C, D, E, F, or G airplanes (as identified in EASA AD 2025-0124, dated May 28, 2025), you must revise your existing maintenance or inspection program to incorporate new or more restrictive airworthiness limitations. The AD is effective June 17, 2026, and the FAA requires the revision to be done within 90 days after the effective date of this AD.
FAA cost estimate per operator
The FAA estimates this AD affects 32 U.S.-registered airplanes and estimates the labor to revise maintenance programs as 90 work‑hours per operator. The FAA estimated the total cost per operator for the retained actions from AD 2023-22-10 is $7,650 (90 work-hours × $85/hour) and estimated the total cost per operator for the new actions is $7,650 (90 work-hours × $85/hour).
Limits on alternative inspections or intervals
After you revise your maintenance or inspection program as required, no alternative actions or inspection intervals are allowed unless they are approved as specified in the referenced EASA AD material. That restriction takes effect once the program revision required by this AD is completed.
Personalized for You
How does this regulation affect your finances?
Personalize government policy and PRIA will tell you what this federal register document means for your household, plus every other regulation we track. PRIA reads each provision against your financial profile to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-13440, Enabling Supersonic Overland Flight
The FAA wants to let supersonic planes fly over land again by updating old rules that banned them because of loud sonic booms. Thanks to new tech that keeps booms quiet, this change will open the door for faster, cooler flights across the U.S., helping America lead the world in supersonic travel. People and companies interested in supersonic flight should share their thoughts by August 17, 2026.
2026-13126, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility; Extension of Comment Period
The FAA is giving more time—until August 5, 2026—for people to share their thoughts on new rules that would limit drone flights near important fixed sites like power plants or airports. This affects drone operators and facility owners who want to keep the skies safe and secure. No new costs yet, just extra time to weigh in and help shape the rules.
2026-08943, Designation-Restrict the Operation of Unmanned Aircraft in Close Proximity to a Fixed Site Facility
The FAA is proposing new rules to keep drones away from certain important fixed sites like power plants or airports to keep everyone safe and secure. If you own or operate one of these sites, you can request a drone flight restriction zone to protect your property and people nearby. Comments are open until July 6, 2026, and these changes could affect drone pilots and site operators, but no big costs are expected.
2026-16970, Agency Information Collection Activities: Requests for Comments; Clearance of a Renewed Approval of Information Collection: Flight Attendant Fatigue Risk Management Plan
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on June 18, 2026. The collection involves submission of Fatigue Risk Management Plans (FRMP) for flight attendants of certificate holders operating under Title 14 of the Code of Federal Regulations (CFR) part 121. The certificate holders will submit the information to be collected to the FAA for review and acceptance as required by the FAA Reauthorization Act of 2018. ---------------------------------------------------------------------------
2026-16954, Airworthiness Directives; International Aero Engines AG Engines
The FAA is requiring certain International Aero Engines AG models to replace some 3rd stage high pressure compressor blades because they can wear out and break, which is unsafe. This rule starts on September 24, 2026, and affects airlines using these engines. Fixing this might cost some money but keeps flights safe and sound.
2026-16956, Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Engines
The FAA proposes to supersede Airworthiness Directive (AD) 2022-11-15, which applies to all Rolls-Royce Deutschland Ltd & Co KG (RRD) Model Trent7000-72 and Trent7000-72C engines. AD 2022-11-15 requires initial and repetitive on-wing borescope inspections (BSIs) of the high-pressure turbine (HPT) blades to detect axial cracking and, depending on the results of the inspections, replacement of the HPT blade set. Since the FAA issued AD 2022-11-15, RRD issued updated service material providing improved instructions for inspection of the HPT blades, removing the reduced life limit for affected HPT blades, and revising the HPT blade limits for axial cracking. This proposed AD would continue to require initial and repetitive on-wing BSIs of the HPT blades to detect axial cracking and, depending on the results of the inspections, replacement of the HPT blade set. This proposed AD would also remove the reduced life limit for affected HPT blades. The FAA is proposing this AD to address the unsafe condition on these products.
Previous / Next Documents
Previous: 2026-09535, Airworthiness Directives; The Boeing Company Airplanes
The FAA is requiring certain Boeing 737 airplanes (models 100 through 500 series) to get regular checks for cracks and corrosion near the aft drain mast because some cracks were found there. These inspections start June 17, 2026, and if problems are found, repairs must be done to keep the planes safe. This means airlines will need to spend time and money on these important safety checks to keep flying smoothly.
Next: 2026-09554, Service Performance Reporting Requirements; Revisions
Starting June 12, 2026, the Postal Regulatory Commission is updating how the Postal Service reports its delivery performance for Market Dominant products. These changes aim to make the reports clearer, more accurate, and easier to understand for everyone. If you’re involved with postal services or tracking mail delivery, expect better info without extra costs or delays.