Turkish Aluminum Pricing Review Released
Published Date: 7/13/2026
Notice
Summary
The U.S. Department of Commerce found that some Turkish companies sold aluminum sheets in the U.S. for less than fair value between April 2024 and March 2025. This means extra duties might be charged to keep things fair for American businesses. Companies involved can comment on these findings before final decisions are made.
Analyzed Economic Effects
4 provisions identified: 0 benefits, 4 costs, 0 mixed.
Preliminary Dumping Margins Announced
Commerce preliminarily found that during April 1, 2024 through March 31, 2025, Teknik Aluminyum Sanayi A.S. had a weighted-average dumping margin of 26.45 percent and Assan Aluminyum Sanayi ve Ticaret A.S. had a margin of 0.00 percent; ASAS (a non-selected company) was preliminarily assigned Teknik’s 26.45 percent rate. These are preliminary results announced July 13, 2026 and could lead to extra antidumping duties if confirmed in the final results.
Cash Deposit Rates After Final Results
If finalized, cash deposit requirements for shipments entered or withdrawn for consumption on or after the publication date of the final results will require company-specific cash deposit rates equal to the weighted-average dumping margins established in the final results; if a rate is de minimis it will be zero. For firms not covered in this review, prior company-specific rates remain, and the all-others rate from the original investigation remains 4.85 percent.
Importer Reimbursement Certificate Requirement
Importers must file a certificate regarding reimbursement of antidumping and/or countervailing duties prior to liquidation of the relevant entries under 19 CFR 351.402(f)(2); failure to comply may lead Commerce to presume reimbursement occurred and could result in assessment of double antidumping duties or an increase in antidumping duties by the amount of countervailing duties.
Duty Assessment, Liquidation Timing, and Procedures
Commerce will direct U.S. Customs and Border Protection (CBP) to assess antidumping duties on appropriate entries based on the final results and intends to issue assessment instructions no earlier than 35 days after publication of the final results; if a timely summons is filed at the U.S. Court of International Trade, CBP will be instructed not to liquidate relevant entries until the statutory injunction period (within 90 days of publication) has expired. Commerce also may calculate importer-specific assessment rates using the ratio of dumping to entered value or per-unit measures as described in the notice.
Your PRIA Score
Personalized for You
How does this regulation affect your finances?
Sign up for a PRIA Policy Scan to see your personalized alignment score for this federal register document and every other regulation we track. We analyze your financial profile against policy provisions to show you exactly what matters to your wallet.
Key Dates
Department and Agencies
Related Federal Register Documents
2026-14023 — Common Alloy Aluminum Sheet From the Republic of Türkiye: Preliminary Results of Countervailing Duty Administrative Review; 2024
The U.S. Department of Commerce found that some Turkish aluminum sheet makers got unfair government help during 2024. This means extra duties might be charged on their products to keep things fair for U.S. businesses. Companies involved should watch for updates and get ready to respond before final decisions come out.
2026-14029 — Polyethylene Terephthalate Film, Sheet, and Strip From India: Final Results of Countervailing Duty Administrative Review; 2023
The U.S. Department of Commerce found that Indian makers of PET film got unfair government help during 2023. Because of this, extra duties (taxes) will apply to their products to keep things fair for U.S. businesses. These changes kick in starting July 13, 2026, and could affect prices and trade between the two countries.
2026-14025 — Certain Cold-Rolled Steel Flat Products From the Republic of Korea: Final Results of Antidumping Duty Administrative Review; 2023-2024
The U.S. Department of Commerce reviewed certain cold-rolled steel from Korea sold between September 2023 and August 2024 and found no unfair pricing. This means no extra duties will be charged on these steel products for now. The decision is official as of July 13, 2026, keeping things steady for Korean steel exporters and U.S. buyers.
2026-14020 — Common Alloy Aluminum Sheet From the Kingdom of Bahrain: Preliminary Results of Antidumping Duty Administrative Review; 2024-2025
The U.S. Department of Commerce found that Gulf Aluminium Rolling Mill (GARMCO) from Bahrain sold aluminum sheets at unfairly low prices between April 2024 and March 2025. This means antidumping duties might change, affecting importers and sellers of these aluminum sheets. The review results are preliminary, with deadlines pushed back due to government shutdowns, so stay tuned for final decisions and possible cost impacts.
2026-14066 — Certain Aluminum Foil From the People's Republic of China: Preliminary Results of Antidumping Duty Administrative Review; 2024-2025
The U.S. Department of Commerce found that some Chinese aluminum foil makers sold their products in the U.S. for less than fair value from April 2024 to March 2025. This means certain companies, like Dingheng New Materials, might face extra duties to keep things fair for American businesses. The review results came out July 13, 2026, and interested parties can still share their thoughts before final decisions.
2026-14067 — Large Diameter Graphite Electrodes From India: Postponement of Preliminary Determination in the Less-Than-Fair-Value Investigation
The U.S. is taking more time to decide if large diameter graphite electrodes from India are being sold unfairly cheap. This delay affects Indian exporters and U.S. companies like Resonac Graphite America and Tokai Carbon, who asked for more time to get the facts right. Instead of August 3, the decision will come later, giving everyone a bit more breathing room before any money or rules change.
Previous / Next Documents
Previous: 2026-14021 — Common Alloy Aluminum Sheet From Bahrain: Preliminary Results of Countervailing Duty Administrative Review; 2024
The U.S. Department of Commerce found that aluminum sheet makers in Bahrain got unfair government help during 2024. This means extra taxes (countervailing duties) might be charged on their products to keep things fair for U.S. businesses. The review deadline was pushed to July 7, 2026, so stay tuned for final decisions and possible money changes!
Next: 2026-14023 — Common Alloy Aluminum Sheet From the Republic of Türkiye: Preliminary Results of Countervailing Duty Administrative Review; 2024
The U.S. Department of Commerce found that some Turkish aluminum sheet makers got unfair government help during 2024. This means extra duties might be charged on their products to keep things fair for U.S. businesses. Companies involved should watch for updates and get ready to respond before final decisions come out.